lkml.org 
[lkml]   [2017]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[GIT PULL 3/4] bcm2835-dt-next-2017-06-12
Date
The following changes since commit 1f8216e7f78c2e55b07117c77887a314bc36f690:

Merge tag 'bcm2835-dt-next-2017-03-30' into devicetree/next (2017-05-13 20:22:59 -0700)

are available in the git repository at:

git://github.com/anholt/linux tags/bcm2835-dt-next-2017-06-12

for you to fetch changes up to 9c53535a15b63218204f2bab2c279b3e64c61c0e:

ARM: dts: bcm2835-rpi-zero: Enable OTG mode (2017-06-12 13:28:50 -0700)

----------------------------------------------------------------
This pull request brings in installation of the RPi3 DT in 32-bit
mode, the new thermal nodes, switches to the faster sdhost controller
for MMC, and enables USB OTG mode on the Pi 0.

----------------------------------------------------------------
Eric Anholt (1):
ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)

Gerd Hoffmann (1):
ARM: dts: bcm283x: switch from &sdhci to &sdhost

Stefan Wahren (4):
ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
ARM: dts: bcm283x: Add dtsi for OTG mode
ARM: dts: bcm283x: Add generic USB PHY
ARM: dts: bcm2835-rpi-zero: Enable OTG mode

arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm2835-rpi-zero.dts | 2 +-
arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +-
arch/arm/boot/dts/bcm2835.dtsi | 4 ++++
arch/arm/boot/dts/bcm2836.dtsi | 4 ++++
arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 1 +
arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi | 10 ++++++++++
arch/arm/boot/dts/bcm283x.dtsi | 27 +++++++++++++++++++++++++++
8 files changed, 49 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b.dts
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi

\
 
 \ /
  Last update: 2017-06-13 19:44    [W:0.927 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site