lkml.org 
[lkml]   [2017]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 3/3] drivers:power:twl4030-charger: add deferred probing for phy and iio
From
Date


On 06/09/2017 11:59 PM, H. Nikolaus Schaller wrote:
> Hi Grygorii,
>
>> Am 09.06.2017 um 18:25 schrieb Grygorii Strashko <grygorii.strashko@ti.com>:
>>
>>
>>
>> On 06/09/2017 01:05 AM, H. Nikolaus Schaller wrote:
>>> Hi,
>>>
>>>> Am 07.06.2017 um 22:44 schrieb Sebastian Reichel <sre@kernel.org>:
>>>>
>>>> Hi,
>>>>
>>>> On Sun, May 21, 2017 at 12:38:18PM +0200, H. Nikolaus Schaller wrote:
>>>>> This fixes an issue if both this twl4030_charger driver and
>>>>> phy-twl4030-usb are compiled as modules and loaded in random order.
>>>>> It has been observed on GTA04 and OpenPandora devices that in worst
>>>>> case the boot process hangs and in best case the AC detection fails
>>>>> with a warning.
>>>>>
>>>>> Therefore we add deferred probing checks for the usb_phy and the
>>>>> iio channel for AC detection.
>>>>>
>>>>> For implementing this we must reorder code because we can't safely
>>>>> return -EPROBE_DEFER after allocating any devm managed interrupt
>>>>> (it might already/still be enabled without working interrupt handler).
>>>>>
>>>>> So the check for required resources that may abort probing by
>>>>> returning -EPROBE_DEFER, must come first.
>>>>
>>>> This sounds fishy. EPROBE_DEFER should not be different from
>>>> other error codes in this regard and devm_ requested resources
>>>> should be free'd on any error. Why is irq handler not working?
>>>
>>> 1. there is no other error code involved, before we try to convert the driver to handle EPROBE_DEFER.
>>> So it is not that EPROBE_DEFER is special but that we add an error return path for it.
>>>
>>> 2. I don't know why it is not working - I just know that the handler seems to be triggered before
>>> all resources are available (if probe() is aborted with EPROBE_DEFER error paths) which ends up in kernel panics.
>>>
>>> Therefore just to be safe, I have reordered things a little (without changing the function):
>>>
>>> 1. check for resources (with some EPROBE_DEFER)
>>> 2. allocate non-devm (with optional EPROBE_DEFER)
>>> 3. allocate devm
>>>
>>> So this should be safe in any case.
>>>
>>> Please also compare a discussion
>>>
>>> https://lkml.org/lkml/2013/2/22/65
>>>
>>>>
>>>>> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
>>>>> ---
>>>>> drivers/power/supply/twl4030_charger.c | 37 ++++++++++++++++++++--------------
>>>>> 1 file changed, 22 insertions(+), 15 deletions(-)
>>>>>
>>>>> diff --git a/drivers/power/supply/twl4030_charger.c b/drivers/power/supply/twl4030_charger.c
>>>>> index 785a07bc4f39..945eabdbbc89 100644
>>>>> --- a/drivers/power/supply/twl4030_charger.c
>>>>> +++ b/drivers/power/supply/twl4030_charger.c
>>>>> @@ -984,6 +984,28 @@ static int twl4030_bci_probe(struct platform_device *pdev)
>>>>>
>>>>> platform_set_drvdata(pdev, bci);
>>>>>
>>>>> + if (bci->dev->of_node) {
>>>>> + struct device_node *phynode;
>>>>> +
>>>>> + phynode = of_find_compatible_node(bci->dev->of_node->parent,
>>>>> + NULL, "ti,twl4030-usb");
>>>>> + if (phynode) {
>>>>> + bci->transceiver = devm_usb_get_phy_by_node(
>>>>> + bci->dev, phynode, &bci->usb_nb);
>>>>> + if (IS_ERR(bci->transceiver) &&
>>>>> + PTR_ERR(bci->transceiver) == -EPROBE_DEFER)
>>>>> + return -EPROBE_DEFER; /* PHY not ready */
>>>>> + }
>>>>> + }
>>>>> +
>>>>> + bci->channel_vac = iio_channel_get(&pdev->dev, "vac");
>>>>> + if (IS_ERR(bci->channel_vac)) {
>>>>> + if (PTR_ERR(bci->channel_vac) == -EPROBE_DEFER)
>>>>> + return -EPROBE_DEFER; /* iio not ready */
>>>>> + dev_warn(&pdev->dev, "could not request vac iio channel");
>>>>> + bci->channel_vac = NULL;
>>>>> + }
>>>>> +
>>>>
>>>> You should not request non-devm managed iio_channel before
>>>> devm-managed power-supply.
>>>
>>> Well, it is not *me* doing that.
>>>
>>> It is the unpatched driver which already does. See:
>>>
>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/power/supply/twl4030_charger.c?h=v4.12-rc4#n1069
>>>
>>> I have just moved this line to a different location to be able to add a proper EPROBE_DEFER return path.
>>>
>>>> This could be fixed by switching to
>>>> devm_iio_channel_get(), which also cleans up some code.
>>>
>>> Yes, this could be an alternative solution.
>>> We still need EPROBE_DEFER handling.
>>>
>>>>
>>>> I suspect, that this is also your IRQ problem, since iio_channel
>>>> is currently free'd before irqs are free'd, but its used in irq
>>>> code.
>>>
>>> Hm. No.
>>>
>>> In upstream code it is never freed on probe failure because there is only
>>> an error return (goto fail) after allocating irqs in case the
>>> twl_i2c_write_u8 fails. Which usually doesn't.
>>>
>>> The EPROBE_DEFER returned by iio_channel_get not being ready simply prints
>>> a warning and turns off AC detection (bci->channel_vac = NULL) forever.
>>>
>>>>
>>>>> bci->ac = devm_power_supply_register(&pdev->dev, &twl4030_bci_ac_desc,
>>>>> NULL);
>>>>> if (IS_ERR(bci->ac)) {
>>>>> @@ -1017,25 +1039,10 @@ static int twl4030_bci_probe(struct platform_device *pdev)
>>>>> return ret;
>>>>> }
>>>>>
>>>>> - bci->channel_vac = iio_channel_get(&pdev->dev, "vac");
>>>>> - if (IS_ERR(bci->channel_vac)) {
>>>
>>> My first attempt to fix EPROBE_DEFER was to add this
>>>
>>> + if (PTR_ERR(bci->channel_vac) == -EPROBE_DEFER)
>>> + return -EPROBE_DEFER; /* iio not ready */
>>>
>>>>> - bci->channel_vac = NULL;
>>>>> - dev_warn(&pdev->dev, "could not request vac iio channel");
>>>>> - }
>>>>> -
>>>>> INIT_WORK(&bci->work, twl4030_bci_usb_work);
>>>>> INIT_DELAYED_WORK(&bci->current_worker, twl4030_current_worker);
>>>>>
>>>>> bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
>>>>> - if (bci->dev->of_node) {
>>>>> - struct device_node *phynode;
>>>>> -
>>>>> - phynode = of_find_compatible_node(bci->dev->of_node->parent,
>>>>> - NULL, "ti,twl4030-usb");
>>>>> - if (phynode)
>>>>> - bci->transceiver = devm_usb_get_phy_by_node(
>>>>> - bci->dev, phynode, &bci->usb_nb);
>>>
>>> and this
>>>
>>> + if (IS_ERR(bci->transceiver) &&
>>> + PTR_ERR(bci->transceiver) == -EPROBE_DEFER) {
>>> + ret = -EPROBE_DEFER; /* PHY not ready */
>>> + goto fail;
>>>
>>> This did run (and potentially return) after installing devm_request_threaded_irq leading
>>> to observation of severe kernel panics by interrupts.
>>>
>>> Moving the iio channel allocation before devm_request_threaded_irq made them go away.
>>>
>>>>> - }
>>>>>
>>>>> /* Enable interrupts now. */
>>>>> reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC | TWL4030_TBATOR2 |
>>>>
>>>> -- Sebastian
>>>
>>> How important is it to keep the current sequence of devm_request_threaded_irq() + (devm_)iio_channel_get() untouched?
>>>
>>> The reason I ask is that it is more likely for (devm_)iio_channel_get() to fail than devm_request_threaded_irq().
>>>
>>> Hence the iio channel should imho be always allocated first, so that we skip allocating+freeing unused irq handlers in case
>>> of iio not being ready.
>>>
>>> Therefore, I suggest to keep the proposed reordering even if we think devm-conversion of iio_channel_get() alone
>>> would solve it equally well.
>>>
>>> Next: should there be two separate patches? One for converting the non-devm iio_channel_get() and cleaning up error path.
>>> And one for adding EPROBE_DEFER error path.
>>>
>>> Or keep it in a single patch because they only make sense if done together (you can't add/remove deferred probing
>>> without converting and/or moving iio_channel_get())?
>>>
>>> So please advise how to proceed.
>>>
>>
>> You should request irq as late as possible in probe - it's safest way to go always.
>> You see crushes simply because request_irq enables IRQ and IRQ can trigger immediately, so
>> IRQ handler will run and all required resources should be ready and initialized.
>>
>> In this case:
>> twl4030_bci_interrupt() -> twl4030_charger_update_current() -> ac_available() -> iio_read_channel_processed()
>> OOOPS.
>>
>> So, first thing to do is to reorder probe to ensure that sequence is safe.
>
> That is exactly what I guessed when proposing the reordering patch.
>
>> Then other stuff - devm, EPROBE_DEFER ...
>
> IMHO, reordering alone doesn't make much sense as a single patch. Or does it?
>

The question is - is there bug in driver or not? As per current code seems yes.
You can easily test it by directly calling twl4030_charger_interrupt() right after
IRQ is requested. there is a bug if it will crush.
As for me it more reasonable to move forward using smaller steps.


Thanks for you work and patches.

--
regards,
-grygorii

\
 
 \ /
  Last update: 2017-06-12 18:25    [W:0.103 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site