lkml.org 
[lkml]   [2017]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 3/4] ARM: dts: rockchip: use pin constants to describe IO in pinctrl
Date
Am Mittwoch, 12. April 2017, 15:10:43 CEST schrieb Kever Yang:
> Use command below to replace the IO naming in pinctrl:
> sed -i -e 's/ 31 RK_FUNC_/ RK_PD7 RK_FUNC_/' arch/arm/boot/dts/rk*
> sed -i -e 's/ 0 RK_FUNC_/ RK_PA0 RK_FUNC_/'
> arch/arm64/boot/dts/rockchip/*
>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

I'm not sure, if we really want to mass-convert each and every pin.
All pins in use right now seem to be working and it hides other
history/blame for these entries.

In any case though, this needs to be split into separate arm32/arm64
patches.


Heiko

\
 
 \ /
  Last update: 2017-05-10 21:20    [W:0.080 / U:29.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site