lkml.org 
[lkml]   [2017]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Regression: 442ec4c04d1: PCI: dwc: all: Split struct pcie_port into host-only and core structures
From
Date
Am Montag, den 08.05.2017, 18:44 +0200 schrieb Peter Senna Tschudin:
> On Mon, May 08, 2017 at 06:34:08PM +0200, Lucas Stach wrote:
> > Am Montag, den 08.05.2017, 17:02 +0200 schrieb Peter Senna Tschudin:
> > > Hello Kishon,
> > >
> > > Our iMX6 hardware (imx6q-b850v3.dts) is not booting with latest
> > > linux-next and I could bisect until:
> > >
> > > commit 442ec4c04d1235f8c664a74004dae54a7a574d18
> > > Author: Kishon Vijay Abraham I <kishon@ti.com>
> > > Date: Wed Feb 15 18:48:14 2017 +0530
> > >
> > > PCI: dwc: all: Split struct pcie_port into host-only and core structures
> > >
> > > Which seem to be causing our issues. Our device (imx6q-b850v3.dts) boots
> > > fine with 4.10, and also boots if we disable pcie with:
> >
> > Are you sure about this bisect? It seems more likely that the secondary
> > bus scanning goes wrong. It seems Lorenzo Pieralisi's cfg space
> > non-posting patches landed in next, so the root cause of this might just
> > be the driver hooking the wrong fault code now.
> >
> > Async and synchronous aborts are different fault codes on ARM. Can you
> > see of removing the "16 +" in hook_fault_code() in
> > drivers/pci/dwc/pci-imx6.c fixes this issue?
>
> changing it to:
>
> hook_fault_code(6, imx6q_pcie_abort_handler, SIGBUS, 0,
> "imprecise external abort");
>
> made no difference, problem persists...

Can you test if 8 or 10 works?

Regards,
Lucas


\
 
 \ /
  Last update: 2017-05-08 18:49    [W:0.045 / U:10.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site