lkml.org 
[lkml]   [2017]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 3/4] s390/sysinfo: Replace six seq_printf() calls by seq_puts()
From
Date
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sun, 7 May 2017 18:18:45 +0200

Six strings which did not contain data format specifications should be put
into a sequence. Thus use the corresponding function "seq_puts".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
arch/s390/kernel/sysinfo.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/s390/kernel/sysinfo.c b/arch/s390/kernel/sysinfo.c
index eefcb54872a5..e7061fcd047a 100644
--- a/arch/s390/kernel/sysinfo.c
+++ b/arch/s390/kernel/sysinfo.c
@@ -139,13 +139,13 @@ static void stsi_15_1_x(struct seq_file *m, struct sysinfo_15_1_x *info)
return;
if (stsi(info, 15, 1, topology_max_mnest))
return;
- seq_printf(m, "CPU Topology HW: ");
+ seq_puts(m, "CPU Topology HW: ");
for (i = 0; i < TOPOLOGY_NR_MAG; i++)
seq_printf(m, " %d", info->mag[i]);
seq_putc(m, '\n');
#ifdef CONFIG_SCHED_TOPOLOGY
store_topology(info);
- seq_printf(m, "CPU Topology SW: ");
+ seq_puts(m, "CPU Topology SW: ");
for (i = 0; i < TOPOLOGY_NR_MAG; i++)
seq_printf(m, " %d", info->mag[i]);
seq_putc(m, '\n');
@@ -202,13 +202,13 @@ static void stsi_2_2_2(struct seq_file *m, struct sysinfo_2_2_2 *info)
EBCASC(info->name, sizeof(info->name));
seq_putc(m, '\n');
seq_printf(m, "LPAR Number: %d\n", info->lpar_number);
- seq_printf(m, "LPAR Characteristics: ");
+ seq_puts(m, "LPAR Characteristics: ");
if (info->characteristics & LPAR_CHAR_DEDICATED)
- seq_printf(m, "Dedicated ");
+ seq_puts(m, "Dedicated ");
if (info->characteristics & LPAR_CHAR_SHARED)
- seq_printf(m, "Shared ");
+ seq_puts(m, "Shared ");
if (info->characteristics & LPAR_CHAR_LIMITED)
- seq_printf(m, "Limited ");
+ seq_puts(m, "Limited ");
seq_putc(m, '\n');
seq_printf(m, "LPAR Name: %-8.8s\n", info->name);
seq_printf(m, "LPAR Adjustment: %d\n", info->caf);
--
2.12.2
\
 
 \ /
  Last update: 2017-05-07 23:44    [W:0.103 / U:7.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site