lkml.org 
[lkml]   [2017]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [BUG] OpenRISC exec init fails, bisected to 0886551 ("initramfs: finish fput() before accessing any binary from initramfs")
On Thu, May 04, 2017 at 01:15:23PM +0530, Lokesh Vutla wrote:
>
>
> On Thursday 04 May 2017 12:41 PM, Stafford Horne wrote:
> > Hello,
> >
> > While booting the v4.11 kernel I found the below issue.
> >
> > The summary of the issue mentions
> >
> > Commit 4a9d4b024a31 ("switch fput to task_work_add") implements a
> > schedule_work() for completing fput(), but did not guarantee calling
> > __fput() after unpacking initramfs. Because of this, there is a
> > possibility that during boot a driver can see ETXTBSY when it tries to
> > load a binary from initramfs as fput() is still pending on that binary.
> >
> > It seems this patch (0886551) introduces that issue though?
> >
> > I am looking into it, but any suggestions would be helpful.
>
> Can you check if flush_delayed_fput() is being called? Do you have
> CONFIG_INITRAMFS_FORCE enabled?

This is not enabled. I debugged it and I cant see it getting called. I
see populate_rootfs getting called but initrd_start is 0, I think there is
something different happening to unpack in initramfs since ours is compiled
in.

I am trying to look into it, but I need to relearn how the initramfs gets
initted for OpenRISC. Perhaps the fix it going to keep the
flush_delayed_fput() call in init/main.c.

> Can I see complete boot log?

I expect to see a line "Unpacking initramfs..." but I don't:

See below:

Compiled-in FDT at c0351200
Linux version 4.10.0-10351-g0886551 (shorne@lianli.shorne-pla.net) (gcc version 5.4.0 (GCC) ) #225 Thu May 4 17:21:27 JST 2017
CPU: OpenRISC-0 (revision 0) @20 MHz
-- dcache disabled
-- icache disabled
-- dmmu: 64 entries, 1 way(s)
-- immu: 64 entries, 1 way(s)
-- additional features:
-- power management
-- PIC
-- timer
setup_memory: Memory: 0x0-0x2000000
Setting up paging and PTEs.
map_ram: Memory: 0x0-0x2000000
itlb_miss_handler c0002160
dtlb_miss_handler c0002000
OpenRISC Linux -- http://openrisc.io
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4080
Kernel command line: console=uart,mmio,0x90000000,115200
earlycon: uart0 at MMIO 0x90000000 (options '115200')
bootconsole [uart0] enabled
PID hash table entries: 128 (order: -4, 512 bytes)
Dentry cache hash table entries: 4096 (order: 1, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 0, 8192 bytes)
Sorting __ex_table...
Memory: 26312K/32768K available (2846K kernel code, 112K rwdata, 312K rodata, 2856K init, 94K bss, 6456K reserved, 0K cma-reserved)
mem_init_done ...........................................
NR_IRQS:32 nr_irqs:32 0
clocksource: openrisc_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 95563022313 ns
40.00 BogoMIPS (lpj=200000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 0, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 0, 8192 bytes)
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -2, 3072 bytes)
NET: Registered protocol family 16
clocksource: Switched to clocksource openrisc_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 0, 8192 bytes)
TCP bind hash table entries: 2048 (order: 0, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 512 (order: 0, 8192 bytes)
UDP-Lite hash table entries: 512 (order: 0, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=30 max_order=12 bucket_order=0
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
90000000.serial: ttyS0 at MMIO 0x90000000 (irq = 2, base_baud = 1250000) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
bootconsole [uart0] disabled
bootconsole [uart0] disabled
libphy: Fixed MDIO Bus: probed
NET: Registered protocol family 17
Freeing unused kernel memory: 2856K
This architecture does not have kernel memory protection.
Failed to execute /init (error -26)
Starting init: /sbin/init exists but couldn't execute it (error -26)
Starting init: /bin/sh exists but couldn't execute it (error -26)
Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance.
---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance.

\
 
 \ /
  Last update: 2017-05-04 10:36    [W:2.505 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site