lkml.org 
[lkml]   [2017]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 pci] PCI/MSI: pci-xgene-msi: Enable MSI support in ACPI boot for X-Gene v1
Hi Marc,
There's no explicit dependency between pcie driver and msi controller.
The current solution that we did is relying on the node ordering in BIOS.
ACPI 5.0 introduced _DEP method to assign a higher priority in
start ordering.
This method could be applied in case of msi and pcie are the same
level of subsys_init (in ACPI boot).
However, PCIe driver has not supported for this dependency check yet.
How do you think about this solution.

Best regards,
Khuong

On Fri, Apr 28, 2017 at 2:27 AM, Marc Zyngier <marc.zyngier@arm.com> wrote:
> On 28/04/17 01:54, Khuong Dinh wrote:
>> From: Khuong Dinh <kdinh@apm.com>
>>
>> This patch makes pci-xgene-msi driver ACPI-aware and provides
>> MSI capability for X-Gene v1 PCIe controllers in ACPI boot mode.
>>
>> Signed-off-by: Khuong Dinh <kdinh@apm.com>
>> Signed-off-by: Duc Dang <dhdang@apm.com>
>> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
>> ---
>> v2:
>> - Verify with BIOS version 3.06.25 and 3.07.09
>> v1:
>> - Initial version
>> ---
>> drivers/pci/host/pci-xgene-msi.c | 35 ++++++++++++++++++++++++++++++++---
>> 1 files changed, 32 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/pci/host/pci-xgene-msi.c b/drivers/pci/host/pci-xgene-msi.c
>> index f1b633b..00aaa3d 100644
>> --- a/drivers/pci/host/pci-xgene-msi.c
>> +++ b/drivers/pci/host/pci-xgene-msi.c
>> @@ -24,6 +24,7 @@
>> #include <linux/pci.h>
>> #include <linux/platform_device.h>
>> #include <linux/of_pci.h>
>> +#include <linux/acpi.h>
>>
>> #define MSI_IR0 0x000000
>> #define MSI_INT0 0x800000
>> @@ -39,7 +40,7 @@ struct xgene_msi_group {
>> };
>>
>> struct xgene_msi {
>> - struct device_node *node;
>> + struct fwnode_handle *fwnode;
>> struct irq_domain *inner_domain;
>> struct irq_domain *msi_domain;
>> u64 msi_addr;
>> @@ -249,6 +250,13 @@ static void xgene_irq_domain_free(struct irq_domain *domain,
>> .free = xgene_irq_domain_free,
>> };
>>
>> +#ifdef CONFIG_ACPI
>> +static struct fwnode_handle *xgene_msi_get_fwnode(struct device *dev)
>> +{
>> + return xgene_msi_ctrl.fwnode;
>> +}
>> +#endif
>> +
>> static int xgene_allocate_domains(struct xgene_msi *msi)
>> {
>> msi->inner_domain = irq_domain_add_linear(NULL, NR_MSI_VEC,
>> @@ -256,7 +264,7 @@ static int xgene_allocate_domains(struct xgene_msi *msi)
>> if (!msi->inner_domain)
>> return -ENOMEM;
>>
>> - msi->msi_domain = pci_msi_create_irq_domain(of_node_to_fwnode(msi->node),
>> + msi->msi_domain = pci_msi_create_irq_domain(msi->fwnode,
>> &xgene_msi_domain_info,
>> msi->inner_domain);
>>
>> @@ -265,6 +273,9 @@ static int xgene_allocate_domains(struct xgene_msi *msi)
>> return -ENOMEM;
>> }
>>
>> +#ifdef CONFIG_ACPI
>> + pci_msi_register_fwnode_provider(&xgene_msi_get_fwnode);
>> +#endif
>> return 0;
>> }
>>
>> @@ -449,6 +460,13 @@ static int xgene_msi_hwirq_free(unsigned int cpu)
>> {},
>> };
>>
>> +#ifdef CONFIG_ACPI
>> +static const struct acpi_device_id xgene_msi_acpi_ids[] = {
>> + {"APMC0D0E", 0},
>> + { },
>> +};
>> +#endif
>> +
>> static int xgene_msi_probe(struct platform_device *pdev)
>> {
>> struct resource *res;
>> @@ -469,7 +487,17 @@ static int xgene_msi_probe(struct platform_device *pdev)
>> goto error;
>> }
>> xgene_msi->msi_addr = res->start;
>> - xgene_msi->node = pdev->dev.of_node;
>> +
>> + xgene_msi->fwnode = of_node_to_fwnode(pdev->dev.of_node);
>> + if (!xgene_msi->fwnode) {
>> + xgene_msi->fwnode = irq_domain_alloc_fwnode(NULL);
>
> Please provide something other than NULL, such as the base address if
> the device. That's quite useful for debugging.
>
>> + if (!xgene_msi->fwnode) {
>> + dev_err(&pdev->dev, "Failed to create fwnode\n");
>> + rc = ENOMEM;
>> + goto error;
>> + }
>> + }
>> +
>> xgene_msi->num_cpus = num_possible_cpus();
>>
>> rc = xgene_msi_init_allocator(xgene_msi);
>> @@ -540,6 +568,7 @@ static int xgene_msi_probe(struct platform_device *pdev)
>> .driver = {
>> .name = "xgene-msi",
>> .of_match_table = xgene_msi_match_table,
>> + .acpi_match_table = ACPI_PTR(xgene_msi_acpi_ids),
>> },
>> .probe = xgene_msi_probe,
>> .remove = xgene_msi_remove,
>>
>
> The code is trivial, but relies on the MSI controller to probe before
> the PCI bus. What enforces this? How is it making sure that this is not
> going to break in the next kernel release? As far as I can tell, there
> is no explicit dependency between the two, making it the whole thing
> extremely fragile.
>
> Thanks,
>
> M.
> --
> Jazz is not dead. It just smells funny...

--
CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is
for the sole use of the intended recipient(s) and contains information that
is confidential and proprietary to Applied Micro Circuits Corporation or
its subsidiaries. It is to be used solely for the purpose of furthering the
parties' business relationship. All unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender by reply e-mail and destroy all copies of the original
message.

\
 
 \ /
  Last update: 2017-05-05 02:36    [W:0.107 / U:39.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site