lkml.org 
[lkml]   [2017]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] ACPI: SPCR: Use access width to determine mmio usage
Date
Jon,

You might want to take a look at using the acpi_read and acpi_write ACPICA interfaces that accept a GAS structure and handle the access width (etc.) automatically.

Bob


> -----Original Message-----
> From: Jon Mason [mailto:jon.mason@broadcom.com]
> Sent: Thursday, May 4, 2017 8:06 AM
> To: Rafael Wysocki <rjw@rjwysocki.net>; Len Brown <lenb@kernel.org>;
> Moore, Robert <robert.moore@intel.com>; Zheng, Lv <lv.zheng@intel.com>
> Cc: linux-acpi@vger.kernel.org; linux-kernel@vger.kernel.org;
> devel@acpica.org; bcm-kernel-feedback-list@broadcom.com
> Subject: [PATCH] ACPI: SPCR: Use access width to determine mmio usage
>
> The current SPCR code does not check the access width of the mmio, and
> uses a default of 8bit register accesses. This prevents devices that
> only do 16 or 32bit register accesses from working. By simply checking
> this field and setting the mmio string appropriately, this issue can be
> corrected. To prevent any legacy issues, the code will default to 8bit
> accesses if the value is anything but 16 or 32.
>
> Signed-off-by: Jon Mason <jon.mason@broadcom.com>
> ---
> drivers/acpi/spcr.c | 18 ++++++++++++++++--
> include/acpi/acrestyp.h | 7 +++++++
> 2 files changed, 23 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c index
> 01c9466..11233f6 100644
> --- a/drivers/acpi/spcr.c
> +++ b/drivers/acpi/spcr.c
> @@ -74,8 +74,22 @@ int __init parse_spcr(bool earlycon)
> goto done;
> }
>
> - iotype = table->serial_port.space_id ==
> ACPI_ADR_SPACE_SYSTEM_MEMORY ?
> - "mmio" : "io";
> + if (table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
> + switch (table->serial_port.access_width) {
> + default:
> + pr_err("Unexpected SPCR Access Width. Defaulting to
> byte size\n");
> + case ACPI_ACCESS_SIZE_BYTE:
> + iotype = "mmio";
> + break;
> + case ACPI_ACCESS_SIZE_WORD:
> + iotype = "mmio16";
> + break;
> + case ACPI_ACCESS_SIZE_DWORD:
> + iotype = "mmio32";
> + break;
> + }
> + } else
> + iotype = "io";
>
> switch (table->interface_type) {
> case ACPI_DBG2_ARM_SBSA_32BIT:
> diff --git a/include/acpi/acrestyp.h b/include/acpi/acrestyp.h index
> f0f7403..781cb55 100644
> --- a/include/acpi/acrestyp.h
> +++ b/include/acpi/acrestyp.h
> @@ -372,6 +372,13 @@ struct acpi_resource_generic_register {
> u64 address;
> };
>
> +/* Generic Address Space Access Sizes */
> +#define ACPI_ACCESS_SIZE_UNDEFINED 0
> +#define ACPI_ACCESS_SIZE_BYTE 1
> +#define ACPI_ACCESS_SIZE_WORD 2
> +#define ACPI_ACCESS_SIZE_DWORD 3
> +#define ACPI_ACCESS_SIZE_QWORD 4
> +
> struct acpi_resource_gpio {
> u8 revision_id;
> u8 connection_type;
> --
> 2.7.4

\
 
 \ /
  Last update: 2017-05-04 18:28    [W:0.099 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site