lkml.org 
[lkml]   [2017]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/7] clk: mvebu: ap806: cosmetic improvement
Date
Instead of using &pdev->dev all over the place, introduce a pointer
variable for it.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
drivers/clk/mvebu/ap806-system-controller.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/mvebu/ap806-system-controller.c b/drivers/clk/mvebu/ap806-system-controller.c
index 8155baccc98e..b2666b5c944f 100644
--- a/drivers/clk/mvebu/ap806-system-controller.c
+++ b/drivers/clk/mvebu/ap806-system-controller.c
@@ -36,20 +36,21 @@ static int ap806_syscon_clk_probe(struct platform_device *pdev)
{
unsigned int freq_mode, cpuclk_freq;
const char *name, *fixedclk_name;
- struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
struct regmap *regmap;
u32 reg;
int ret;

regmap = syscon_node_to_regmap(np);
if (IS_ERR(regmap)) {
- dev_err(&pdev->dev, "cannot get regmap\n");
+ dev_err(dev, "cannot get regmap\n");
return PTR_ERR(regmap);
}

ret = regmap_read(regmap, AP806_SAR_REG, &reg);
if (ret) {
- dev_err(&pdev->dev, "cannot read from regmap\n");
+ dev_err(dev, "cannot read from regmap\n");
return ret;
}

@@ -89,7 +90,7 @@ static int ap806_syscon_clk_probe(struct platform_device *pdev)
cpuclk_freq = 600;
break;
default:
- dev_err(&pdev->dev, "invalid SAR value\n");
+ dev_err(dev, "invalid SAR value\n");
return -EINVAL;
}

@@ -99,7 +100,7 @@ static int ap806_syscon_clk_probe(struct platform_device *pdev)
/* CPU clocks depend on the Sample At Reset configuration */
of_property_read_string_index(np, "clock-output-names",
0, &name);
- ap806_clks[0] = clk_register_fixed_rate(&pdev->dev, name, NULL,
+ ap806_clks[0] = clk_register_fixed_rate(dev, name, NULL,
0, cpuclk_freq);
if (IS_ERR(ap806_clks[0])) {
ret = PTR_ERR(ap806_clks[0]);
@@ -108,7 +109,7 @@ static int ap806_syscon_clk_probe(struct platform_device *pdev)

of_property_read_string_index(np, "clock-output-names",
1, &name);
- ap806_clks[1] = clk_register_fixed_rate(&pdev->dev, name, NULL, 0,
+ ap806_clks[1] = clk_register_fixed_rate(dev, name, NULL, 0,
cpuclk_freq);
if (IS_ERR(ap806_clks[1])) {
ret = PTR_ERR(ap806_clks[1]);
@@ -118,7 +119,7 @@ static int ap806_syscon_clk_probe(struct platform_device *pdev)
/* Fixed clock is always 1200 Mhz */
of_property_read_string_index(np, "clock-output-names",
2, &fixedclk_name);
- ap806_clks[2] = clk_register_fixed_rate(&pdev->dev, fixedclk_name, NULL,
+ ap806_clks[2] = clk_register_fixed_rate(dev, fixedclk_name, NULL,
0, 1200 * 1000 * 1000);
if (IS_ERR(ap806_clks[2])) {
ret = PTR_ERR(ap806_clks[2]);
--
git-series 0.9.1
\
 
 \ /
  Last update: 2017-05-31 16:10    [W:0.136 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site