lkml.org 
[lkml]   [2017]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] pinctrl: sprd: Add Spreadtrum pin control driver
Hi Linus,

On 一, 5月 29, 2017 at 06:28:49下午 +0200, Linus Walleij wrote:
> On Sat, May 27, 2017 at 7:56 AM, Baolin Wang <baolin.wang@spreadtrum.com> wrote:
>
> > This patch adds the pin control driver for Spreadtrum SC9860 platform.
> >
> > Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
>
> Overall I see that you want to store functions and groups in the device tree
> using the current helpers from Tony. That is OK if you want to take that
> approach, though I prefer the pins/groups/function encoding in plaintext.
>
> But when it comes to pin config:
>
> > +static int sprd_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin_id,
> > + unsigned long *config)
> > +{
> > + struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
> > + struct sprd_pin *pin = sprd_pinctrl_get_pin_by_id(pctl, pin_id);
> > +
> > + if (!pin)
> > + return -EINVAL;
> > +
> > + if (pin->type == GLOBAL_CTRL_PIN) {
> > + *config = (readl((void __iomem *)pin->reg) >>
> > + pin->bit_offset) & PINCTRL_BIT_MASK(pin->bit_width);
> > + } else {
> > + *config = readl((void __iomem *)pin->reg);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int sprd_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin_id,
> > + unsigned long *configs, unsigned int num_configs)
> > +{
> > + struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
> > + struct sprd_pin *pin = sprd_pinctrl_get_pin_by_id(pctl, pin_id);
> > + unsigned long reg;
> > + int i;
> > +
> > + if (!pin)
> > + return -EINVAL;
> > +
> > + for (i = 0; i < num_configs; i++) {
> > + if (pin->type == GLOBAL_CTRL_PIN) {
> > + reg = readl((void __iomem *)pin->reg);
> > + reg &= ~(PINCTRL_BIT_MASK(pin->bit_width)
> > + << pin->bit_offset);
> > + reg |= (configs[i] & PINCTRL_BIT_MASK(pin->bit_width))
> > + << pin->bit_offset;
> > + writel(reg, (void __iomem *)pin->reg);
> > + } else {
> > + writel(configs[i], (void __iomem *)pin->reg);
> > + }
> > + pin->config = configs[i];
> > + }
> > +
> > + return 0;
> > +}
>
> This is just hammering the register values, you have effectively defined your
> register layout as your device tree ABI.
>
> Please don't do this, please use genric pin config and use the approach
> other drivers take with explicit strings encoding the pin configuration.

Make sense. I will try to use genric pin config instead of the magic number.
Thanks for your comments.

>
> Even pinctrl-single that maintain quite a bit of muxing data in the device
> tree still use the generic pin config API, see:
> drivers/pinctrl/pinctrl-single.c
> pcs_pinconf_get(), pcs_pinconf_set()
>
> Same for group config.
>
> Yours,
> Linus Walleij

\
 
 \ /
  Last update: 2017-05-31 10:03    [W:0.071 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site