lkml.org 
[lkml]   [2017]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND v2 PATCH] v4l: omap_vout: vrfb: Convert to dmaengine
Date
The dmaengine driver for sDMA now have support for interleaved transfer.
This trasnfer type was open coded with the legacy omap-dma API, but now
we can move it to dmaengine.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
Hi,

changes since RESEND (27.10.2016):
- rebased on next-20170503

I can not test it on real HW (still), but I have validated [1] that the change
is correct and should not cause any regression.

Laurent: can you verify the patch on a real hardware?

Regards,
Peter

drivers/media/platform/omap/omap_vout_vrfb.c | 133 ++++++++++++++++-----------
drivers/media/platform/omap/omap_voutdef.h | 6 +-
2 files changed, 83 insertions(+), 56 deletions(-)

diff --git a/drivers/media/platform/omap/omap_vout_vrfb.c b/drivers/media/platform/omap/omap_vout_vrfb.c
index 92c4e1826356..45a553d4f5b2 100644
--- a/drivers/media/platform/omap/omap_vout_vrfb.c
+++ b/drivers/media/platform/omap/omap_vout_vrfb.c
@@ -16,7 +16,6 @@
#include <media/videobuf-dma-contig.h>
#include <media/v4l2-device.h>

-#include <linux/omap-dma.h>
#include <video/omapvrfb.h>

#include "omap_voutdef.h"
@@ -63,7 +62,7 @@ static int omap_vout_allocate_vrfb_buffers(struct omap_vout_device *vout,
/*
* Wakes up the application once the DMA transfer to VRFB space is completed.
*/
-static void omap_vout_vrfb_dma_tx_callback(int lch, u16 ch_status, void *data)
+static void omap_vout_vrfb_dma_tx_callback(void *data)
{
struct vid_vrfb_dma *t = (struct vid_vrfb_dma *) data;

@@ -94,6 +93,7 @@ int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num,
int ret = 0, i, j;
struct omap_vout_device *vout;
struct video_device *vfd;
+ dma_cap_mask_t mask;
int image_width, image_height;
int vrfb_num_bufs = VRFB_NUM_BUFS;
struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
@@ -131,18 +131,27 @@ int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num,
/*
* Request and Initialize DMA, for DMA based VRFB transfer
*/
- vout->vrfb_dma_tx.dev_id = OMAP_DMA_NO_DEVICE;
- vout->vrfb_dma_tx.dma_ch = -1;
- vout->vrfb_dma_tx.req_status = DMA_CHAN_ALLOTED;
- ret = omap_request_dma(vout->vrfb_dma_tx.dev_id, "VRFB DMA TX",
- omap_vout_vrfb_dma_tx_callback,
- (void *) &vout->vrfb_dma_tx, &vout->vrfb_dma_tx.dma_ch);
- if (ret < 0) {
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_INTERLEAVE, mask);
+ vout->vrfb_dma_tx.chan = dma_request_chan_by_mask(&mask);
+ if (IS_ERR(vout->vrfb_dma_tx.chan)) {
vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
+ } else {
+ size_t xt_size = sizeof(struct dma_interleaved_template) +
+ sizeof(struct data_chunk);
+
+ vout->vrfb_dma_tx.xt = kzalloc(xt_size, GFP_KERNEL);
+ if (!vout->vrfb_dma_tx.xt) {
+ dma_release_channel(vout->vrfb_dma_tx.chan);
+ vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
+ }
+ }
+
+ if (vout->vrfb_dma_tx.req_status == DMA_CHAN_NOT_ALLOTED)
dev_info(&pdev->dev,
": failed to allocate DMA Channel for video%d\n",
vfd->minor);
- }
+
init_waitqueue_head(&vout->vrfb_dma_tx.wait);

/* statically allocated the VRFB buffer is done through
@@ -177,7 +186,9 @@ void omap_vout_release_vrfb(struct omap_vout_device *vout)

if (vout->vrfb_dma_tx.req_status == DMA_CHAN_ALLOTED) {
vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
- omap_free_dma(vout->vrfb_dma_tx.dma_ch);
+ kfree(vout->vrfb_dma_tx.xt);
+ dmaengine_terminate_sync(vout->vrfb_dma_tx.chan);
+ dma_release_channel(vout->vrfb_dma_tx.chan);
}
}

@@ -219,70 +230,84 @@ int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
}

int omap_vout_prepare_vrfb(struct omap_vout_device *vout,
- struct videobuf_buffer *vb)
+ struct videobuf_buffer *vb)
{
- dma_addr_t dmabuf;
- struct vid_vrfb_dma *tx;
+ struct dma_async_tx_descriptor *tx;
+ enum dma_ctrl_flags flags;
+ struct dma_chan *chan = vout->vrfb_dma_tx.chan;
+ struct dma_device *dmadev = chan->device;
+ struct dma_interleaved_template *xt = vout->vrfb_dma_tx.xt;
+ dma_cookie_t cookie;
+ enum dma_status status;
enum dss_rotation rotation;
- u32 dest_frame_index = 0, src_element_index = 0;
- u32 dest_element_index = 0, src_frame_index = 0;
- u32 elem_count = 0, frame_count = 0, pixsize = 2;
+ size_t dst_icg;
+ u32 pixsize;

if (!is_rotation_enabled(vout))
return 0;

- dmabuf = vout->buf_phy_addr[vb->i];
/* If rotation is enabled, copy input buffer into VRFB
* memory space using DMA. We are copying input buffer
* into VRFB memory space of desired angle and DSS will
* read image VRFB memory for 0 degree angle
*/
+
pixsize = vout->bpp * vout->vrfb_bpp;
- /*
- * DMA transfer in double index mode
- */
+ dst_icg = ((MAX_PIXELS_PER_LINE * pixsize) -
+ (vout->pix.width * vout->bpp)) + 1;
+
+ xt->src_start = vout->buf_phy_addr[vb->i];
+ xt->dst_start = vout->vrfb_context[vb->i].paddr[0];
+
+ xt->numf = vout->pix.height;
+ xt->frame_size = 1;
+ xt->sgl[0].size = vout->pix.width * vout->bpp;
+ xt->sgl[0].icg = dst_icg;
+
+ xt->dir = DMA_MEM_TO_MEM;
+ xt->src_sgl = false;
+ xt->src_inc = true;
+ xt->dst_sgl = true;
+ xt->dst_inc = true;
+
+ tx = dmadev->device_prep_interleaved_dma(chan, xt, flags);
+ if (tx == NULL) {
+ pr_err("%s: DMA interleaved prep error\n", __func__);
+ return -EINVAL;
+ }

- /* Frame index */
- dest_frame_index = ((MAX_PIXELS_PER_LINE * pixsize) -
- (vout->pix.width * vout->bpp)) + 1;
-
- /* Source and destination parameters */
- src_element_index = 0;
- src_frame_index = 0;
- dest_element_index = 1;
- /* Number of elements per frame */
- elem_count = vout->pix.width * vout->bpp;
- frame_count = vout->pix.height;
- tx = &vout->vrfb_dma_tx;
- tx->tx_status = 0;
- omap_set_dma_transfer_params(tx->dma_ch, OMAP_DMA_DATA_TYPE_S32,
- (elem_count / 4), frame_count, OMAP_DMA_SYNC_ELEMENT,
- tx->dev_id, 0x0);
- /* src_port required only for OMAP1 */
- omap_set_dma_src_params(tx->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
- dmabuf, src_element_index, src_frame_index);
- /*set dma source burst mode for VRFB */
- omap_set_dma_src_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
- rotation = calc_rotation(vout);
+ tx->callback = omap_vout_vrfb_dma_tx_callback;
+ tx->callback_param = &vout->vrfb_dma_tx;
+
+ cookie = dmaengine_submit(tx);
+ if (dma_submit_error(cookie)) {
+ pr_err("%s: dmaengine_submit failed (%d)\n", __func__, cookie);
+ return -EINVAL;
+ }

- /* dest_port required only for OMAP1 */
- omap_set_dma_dest_params(tx->dma_ch, 0, OMAP_DMA_AMODE_DOUBLE_IDX,
- vout->vrfb_context[vb->i].paddr[0], dest_element_index,
- dest_frame_index);
- /*set dma dest burst mode for VRFB */
- omap_set_dma_dest_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
- omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, 0x20, 0);
+ vout->vrfb_dma_tx.tx_status = 0;
+ dma_async_issue_pending(chan);

- omap_start_dma(tx->dma_ch);
- wait_event_interruptible_timeout(tx->wait, tx->tx_status == 1,
+ wait_event_interruptible_timeout(vout->vrfb_dma_tx.wait,
+ vout->vrfb_dma_tx.tx_status == 1,
VRFB_TX_TIMEOUT);

- if (tx->tx_status == 0) {
- omap_stop_dma(tx->dma_ch);
+ status = dma_async_is_tx_complete(chan, cookie, NULL, NULL);
+
+ if (vout->vrfb_dma_tx.tx_status == 0) {
+ pr_err("%s: Timeout while waiting for DMA\n", __func__);
+ dmaengine_terminate_sync(chan);
+ return -EINVAL;
+ } else if (status != DMA_COMPLETE) {
+ pr_err("%s: DMA completion %s status\n", __func__,
+ status == DMA_ERROR ? "error" : "busy");
+ dmaengine_terminate_sync(chan);
return -EINVAL;
}
+
/* Store buffers physical address into an array. Addresses
* from this array will be used to configure DSS */
+ rotation = calc_rotation(vout);
vout->queued_buf_addr[vb->i] = (u8 *)
vout->vrfb_context[vb->i].paddr[rotation];
return 0;
diff --git a/drivers/media/platform/omap/omap_voutdef.h b/drivers/media/platform/omap/omap_voutdef.h
index 80c79fabdf95..56b630b1c8b4 100644
--- a/drivers/media/platform/omap/omap_voutdef.h
+++ b/drivers/media/platform/omap/omap_voutdef.h
@@ -14,6 +14,7 @@
#include <media/v4l2-ctrls.h>
#include <video/omapfb_dss.h>
#include <video/omapvrfb.h>
+#include <linux/dmaengine.h>

#define YUYV_BPP 2
#define RGB565_BPP 2
@@ -81,8 +82,9 @@ enum vout_rotaion_type {
* for VRFB hidden buffer
*/
struct vid_vrfb_dma {
- int dev_id;
- int dma_ch;
+ struct dma_chan *chan;
+ struct dma_interleaved_template *xt;
+
int req_status;
int tx_status;
wait_queue_head_t wait;
--
2.12.2
\
 
 \ /
  Last update: 2017-05-03 13:10    [W:0.053 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site