lkml.org 
[lkml]   [2017]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] Documentation: DT: bindings: input: Add documentation for cyttsp5
Date
Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings
documentation. It can use I2C or SPI bus.
This touchscreen can handle some defined zone that are designed and
sent as button. To be able to customize the keycode sent, the
"linux,code" property in a "button" sub-node can be used.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
---
.../bindings/input/touchscreen/cyttsp5.txt | 55 ++++++++++++++++++++++
1 file changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cyttsp5.txt

diff --git a/Documentation/devicetree/bindings/input/touchscreen/cyttsp5.txt b/Documentation/devicetree/bindings/input/touchscreen/cyttsp5.txt
new file mode 100644
index 000000000000..713a377b5039
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/cyttsp5.txt
@@ -0,0 +1,55 @@
+* Cypress cyttsp touchscreen controller, generation 5
+
+Required properties:
+ - compatible : must be "cypress,cyttsp5"
+ - reg : Device I2C address or SPI chip select number
+ - interrupt-parent : the phandle for the gpio controller
+ (see interrupt binding[0]).
+ - interrupts : (gpio) interrupt to which the chip is connected
+ (see interrupt binding[0]).
+
+Optional properties (many of them coming from touchscreen binding[1]):
+ - reset-gpios : the reset gpio the chip is connected to
+ (see GPIO binding[2] for more details).
+ - touchscreen-size-x : horizontal resolution of touchscreen (in pixels)
+ - touchscreen-size-y : vertical resolution of touchscreen (in pixels)
+ - touchscreen-fuzz-x : horizontal noise value of the absolute input device
+ (in pixels)
+ - touchscreen-fuzz-y : vertical noise value of the absolute input device
+ (in pixels)
+
+This touchscreen can handle some buttons that are touchscreen's defined zones.
+Each button's event can be customized using a sub-node properties:
+ - linux,code: Keycode to emit.
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
+[2]: Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+&i2c0 {
+ [...]
+
+ tsc@24 {
+ compatible = "cypress,cyttsp5";
+ reg = <0x24>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tp_reset_ds203>;
+ interrupt-parent = <&pio>;
+ interrupts = <1 5 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
+
+ button@0 {
+ linux,code = <KEY_HOMEPAGE>;
+ };
+
+ button@1 {
+ linux,code = <KEY_MENU>;
+ };
+
+ button@2 {
+ linux,code = <KEY_BACK>;
+ };
+ };
+};
--
2.11.0
\
 
 \ /
  Last update: 2017-05-29 16:47    [W:0.106 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site