lkml.org 
[lkml]   [2017]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/4] pinctrl: rockchip: Add iomux-route switching support for rk3228
Date
There are 9 IP blocks pin routes need to be switched, that are
pwm-0, pwm-1, pwm-2, pwm-3, sdio, spi, emmc, uart2, uart1.

Signed-off-by: David Wu <david.wu@rock-chips.com>
---
Change in v2:
- calculate the per-bank value dynamically (Heiko)

drivers/pinctrl/pinctrl-rockchip.c | 132 +++++++++++++++++++++++++++++++++++++
1 file changed, 132 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index a5d7177..605e24e 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -605,6 +605,136 @@ static void rk3328_recalc_mux(u8 bank_num, int pin, int *reg,
*bit = data->bit;
}

+static struct rockchip_mux_route_data rk3228_mux_route_data[] = {
+ {
+ /* pwm0-0 */
+ .bank_num = 0,
+ .pin = 26,
+ .func = 1,
+ .route_offset = 0x50,
+ .route_val = BIT(16),
+ }, {
+ /* pwm0-1 */
+ .bank_num = 3,
+ .pin = 21,
+ .func = 1,
+ .route_offset = 0x50,
+ .route_val = BIT(16) | BIT(0),
+ }, {
+ /* pwm1-0 */
+ .bank_num = 0,
+ .pin = 27,
+ .func = 1,
+ .route_offset = 0x50,
+ .route_val = BIT(16 + 1),
+ }, {
+ /* pwm1-1 */
+ .bank_num = 0,
+ .pin = 30,
+ .func = 2,
+ .route_offset = 0x50,
+ .route_val = BIT(16 + 1) | BIT(1),
+ }, {
+ /* pwm2-0 */
+ .bank_num = 0,
+ .pin = 28,
+ .func = 1,
+ .route_offset = 0x50,
+ .route_val = BIT(16 + 2),
+ }, {
+ /* pwm2-1 */
+ .bank_num = 1,
+ .pin = 12,
+ .func = 2,
+ .route_offset = 0x50,
+ .route_val = BIT(16 + 2) | BIT(2),
+ }, {
+ /* pwm3-0 */
+ .bank_num = 3,
+ .pin = 26,
+ .func = 1,
+ .route_offset = 0x50,
+ .route_val = BIT(16 + 3),
+ }, {
+ /* pwm3-1 */
+ .bank_num = 1,
+ .pin = 11,
+ .func = 2,
+ .route_offset = 0x50,
+ .route_val = BIT(16 + 3) | BIT(3),
+ }, {
+ /* sdio-0_d0 */
+ .bank_num = 1,
+ .pin = 1,
+ .func = 1,
+ .route_offset = 0x50,
+ .route_val = BIT(16 + 4),
+ }, {
+ /* sdio-1_d0 */
+ .bank_num = 3,
+ .pin = 2,
+ .func = 1,
+ .route_offset = 0x50,
+ .route_val = BIT(16 + 4) | BIT(4),
+ }, {
+ /* spi-0_rx */
+ .bank_num = 0,
+ .pin = 13,
+ .func = 2,
+ .route_offset = 0x50,
+ .route_val = BIT(16 + 5),
+ }, {
+ /* spi-1_rx */
+ .bank_num = 2,
+ .pin = 0,
+ .func = 2,
+ .route_offset = 0x50,
+ .route_val = BIT(16 + 5) | BIT(5),
+ }, {
+ /* emmc-0_cmd */
+ .bank_num = 1,
+ .pin = 22,
+ .func = 2,
+ .route_offset = 0x50,
+ .route_val = BIT(16 + 7),
+ }, {
+ /* emmc-1_cmd */
+ .bank_num = 2,
+ .pin = 4,
+ .func = 2,
+ .route_offset = 0x50,
+ .route_val = BIT(16 + 7) | BIT(7),
+ }, {
+ /* uart2-0_rx */
+ .bank_num = 1,
+ .pin = 19,
+ .func = 2,
+ .route_offset = 0x50,
+ .route_val = BIT(16 + 8),
+ }, {
+ /* uart2-1_rx */
+ .bank_num = 1,
+ .pin = 10,
+ .func = 2,
+ .route_offset = 0x50,
+ .route_val = BIT(16 + 8) | BIT(8),
+ }, {
+ /* uart1-0_rx */
+ .bank_num = 1,
+ .pin = 10,
+ .func = 1,
+ .route_offset = 0x50,
+ .route_val = BIT(16 + 11),
+ }, {
+ /* uart1-1_rx */
+ .bank_num = 3,
+ .pin = 13,
+ .func = 1,
+ .route_offset = 0x50,
+ .route_val = BIT(16 + 11) | BIT(11),
+ },
+};
+
static bool rockchip_get_mux_route(struct rockchip_pin_bank *bank, int pin,
int mux, u32 *reg, u32 *value)
{
@@ -2898,6 +3028,8 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
.label = "RK3228-GPIO",
.type = RK3288,
.grf_mux_offset = 0x0,
+ .iomux_routes = rk3228_mux_route_data,
+ .niomux_routes = ARRAY_SIZE(rk3228_mux_route_data),
.pull_calc_reg = rk3228_calc_pull_reg_and_bit,
.drv_calc_reg = rk3228_calc_drv_reg_and_bit,
};
--
1.9.1

\
 
 \ /
  Last update: 2017-05-26 09:19    [W:0.129 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site