lkml.org 
[lkml]   [2017]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: [PATCH 2/7] RISC-V: arch/riscv Makefile and Kconfigs
    Hi Palmer,

    On Tue, May 23, 2017 at 2:41 AM, Palmer Dabbelt <palmer@dabbelt.com> wrote:
    > --- /dev/null
    > +++ b/arch/riscv/Kconfig
    > @@ -0,0 +1,300 @@

    > +config PLIC
    > + bool "Platform-Level Interrupt Controller"
    > + default y
    > + help
    > + This enables support for the PLIC chip found in standard RISC-V
    > + systems. The PLIC is the top-most interrupt controller found in
    > + the system, connected directly to the core complex. All other
    > + interrupt sources (MSI, GPIO, etc) are subordinate to the PLIC.
    > +
    > + If you don't know what to do here, say Y.
    > +

    I think this symbol belongs in drivers/irqchip/Kconfig, and the corresponding
    driver in drivers/irqchip/.

    Gr{oetje,eeting}s,

    Geert

    --
    Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

    In personal conversations with technical people, I call myself a hacker. But
    when I'm talking to journalists I just say "programmer" or something like that.
    -- Linus Torvalds

    \
     
     \ /
      Last update: 2017-05-23 12:53    [W:2.083 / U:0.056 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site