lkml.org 
[lkml]   [2017]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: vf610-zii-dev-rev-b: add hi8435 device
On Mon, May 22, 2017 at 07:29:14PM +0300, Nikita Yushchenko wrote:
> >> + hi8435@1 {
> >> + compatible = "holt,hi8435";
> >> + reg = <1>;
> >> + spi-max-frequency = <20000000>;
> >> + gpios = <&gpio5 3 0>;
> >
> > Nit: GPIO_ACTIVE_HIGH instead of 0?
>
> Gray area here.
>
> Chip's reset input is active LOW.

Nikita

There second issue here is that you are going to be getting newbies
looking at .dts files and submitting patches to replace the 0 with
GPIO_ACTIVE_HIGH in all files, just like they submit patches fixing
checkpatch warnings.

> However, hi8435 driver historically was coded using inverted values
> passed to gpiolib calls. And there are setups in the wild with device
> trees containing GPIO_ACTIVE_HIGH that I'd prefer not breaking.
>
> To solve, I submitted a patch on hi8435 driver that changes to _raw()
> gpio calls (thus making it independent of what is written in device
> tree), and want [future] device trees not to contain explicitly written
> gpio polarity.

So maybe add another #define, GPIO_ACTIVE_IGNORED, to make it clear
that it does not matter what value you put there, it is ignored.

Andrew

\
 
 \ /
  Last update: 2017-05-22 20:22    [W:0.127 / U:1.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site