lkml.org 
[lkml]   [2017]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 4/5] drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension
On Mon, 22 May 2017 17:22:12 +0100
Mark Rutland <mark.rutland@arm.com> wrote:

> On Mon, May 22, 2017 at 10:45:21AM -0500, Kim Phillips wrote:
> > On Mon, 22 May 2017 13:44:46 +0100
> > Mark Rutland <mark.rutland@arm.com> wrote:
> > > On Mon, May 22, 2017 at 07:32:49AM -0500, Kim Phillips wrote:
> > > > On Thu, 18 May 2017 18:24:32 +0100
> > > > Will Deacon <will.deacon@arm.com> wrote:
> > > > > +/* Perf callbacks */
> > > > > +static int arm_spe_pmu_event_init(struct perf_event *event)
> > > > > +{
> > > > > + u64 reg;
> > > > > + struct perf_event_attr *attr = &event->attr;
> > > > > + struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
> > > > > +
> > > > > + /* This is, of course, deeply driver-specific */
> > > > > + if (attr->type != event->pmu->type)
> > > > > + return -ENOENT;
> > > > > +
> > >
> > > [trimming other return sites]
> >
> > Thanks but other conditions, such as the user specified sample period
> > check would be more appropriate to be left in for this discussion.
>
> Sure, I was just trimming to a single example for brevity. I appreciate
> there are cases where it may not be as simple to determine the cause
> from userspace today.

That helps, thanks.

> > > > I've consistently brought up lack of proper user error messaging in all
> > > > previous submissions of this driver:
> > > >
> > > ... and we've consistently explained why logging such things to dmesg by
> > > default will not fly. As before, while we call these return codes error
> > > values, they are *not* errors in the same sense as pr_err().
> >
> > I've expressed my disagreement to that matter here:
> >
> > https://lkml.org/lkml/2017/4/7/223
> >
> > yet it got no response.
>
> That's not strictly true.
>
> I replied to the mail you cited, attempting to clarify as best I could.
> You replied again, and it's true I didn't respond there, but there was
> no new substantiative argument. To summarize that thread, to the best of
> my understanding:
>
> * We disagree on the semantic of "an error" in this context. Clearly we
> aren't going to agree.

That's bad. We ought to agree on what an error is, in this and any
other context. I'm willing to listen if you have a convincing
argument, but none was given after my last reply:

"The driver is trying to report an error: in the above example, it's
reporting that it cannot support an operation by returning
-*E*OPNOTSUPP: an ERROR because it was unable to complete the request:
the request failed. Unlike e.g., a warning where something may not
have been quite right, but went along with executing the operation
anyway."

To put it another way, perf_event_open returning errno EINVAL is no
different than open() returning the same with the meaning 'Invalid
value in flags.' In fact, the perf_event_open manpage says errors in
setting the sample frequency make the syscall return the error code -1
and EINVAL in errno.

Prior to that I see what might possibly be the underlying cause for the
discrepancy: you said:

> > > The above cases are not (system) errors, and using dev_err (even
> > > ratelimited) is certainly not appropriate. These are pr_debug() at best.

So is it that you are resisting technically calling it an error because
that would imply we use pr_err() instead of pr_debug() perhaps? In
which case, is that because of fuzzing?:

quoting you again:

"There are some cases where they're actively harmful (e.g. when fuzzing)."

to which my response remains:

"I'd expect fuzzer users to be more amenable to manually modifying the
driver rather than regular users of the driver."

to which your then-response was seemingly irrelevant, and against the
benefit of normal user of the driver:

"When fuzzing, I take a mainline, defconfig kernel, and run it through
its paces. I don't touch each and every driver."

If this is the case, can we find another solution to make both regular
fuzzer runners and regular users happy?

> * We agree that error reporting and handling is painful in this area.
>
> * We disagree w.r.t. using printk() and friends. My position has not
> been swayed.
>
> [...]

I beg you to please reconsider, given we agree that this particular
syscall is bad, and the alternative (no messaging) will truly be worse
for our users.

> > > > AFAICT, my comments hold, yet the driver still gets resubmitted without
> > > > them being addressed. How do we get out of this loop?
> > >
> > > We've repeatedly explained why the approach you suggest is not feasible.
> > > Perhaps you could try to explain why our approach doesn't seem feasible
> > > to you.
> >
> > I don't want SPE users to have to manually instrument the driver
> > in order to find out what it didn't like about the parameters they
> > specified. This problem has already been reported by other early
> > adopters. perf itself says "dmesg may provide additional information",
> > so let's please use it.
>
> Sorry, but regardless of any argument there is to be had on how best to
> handle errors, I'm not going to be swayed to the position that the
> solution is printk() or its ilk, for the reasons that I have outlined
> several times previously.
>
> As one of the maintainers of PMU code, I must NAK such code in any PMU
> driver.

We disagree here: I am of the belief that users should be made aware
of what they're doing wrong, and right now, dmesg is the vehicle to do
so.

> FWIW, I'm more than happy to:
>
> * Add pr_debug() statements so that developers directly using the perf
> interfaces can debug their userspace code and without having to first
> develop a full knowledge of what is and isn't permitted.

Perhaps this is a terminology context problem again, but to be
abundantly clear: This isn't for developers per se; this is for normal,
regular perf users trying to use perf to debug the performance of their
applications. I don't expect these users to have to know how to turn
on pr_debug messaging, esp. because it might turn on other noisy
drivers in use at the same time.

> * Add documentation such that userspace developers can figure out what
> is and is not supported.
>
> * Add interfaces as appropriate such that userspace can more reliably
> determine the reason(s) an error code has been returned. For example,
> we might expose sample period information under sysfs.
>
> * Help with any userspace error handling code. I am more than happy to
> review such code and to provide improvements myself.
>
> ... so if you want to make any progress on this front, please either
> look at one of those, or make a *new* suggestion that does not involve
> printk.

Not that I was looking, but I did just happen to notice this posting
today:

https://lkml.org/lkml/2017/5/22/578

but I have no clue if or when it will be accepted, let alone whether
it's applicable to perf, so *for the time being*, dmesg is what we have
for now.

Kim

\
 
 \ /
  Last update: 2017-05-23 01:24    [W:2.282 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site