lkml.org 
[lkml]   [2017]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 01/20] net: dsa: change scope of STP state setter
Date
Instead of having multiple STP state helpers scoping a slave device
supporting both the DSA logic and the switchdev binding, provide a
single dsa_port_set_state helper scoping a DSA port, as well as its
dsa_port_set_state_now wrapper which skips the prepare phase.

This allows us to better separate the DSA logic from the slave device
handling.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
net/dsa/slave.c | 44 ++++++++++++++++++++++----------------------
1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 91236d602301..403d1dfe7f50 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -85,13 +85,15 @@ static inline bool dsa_port_is_bridged(struct dsa_port *dp)
return !!dp->bridge_dev;
}

-static void dsa_slave_set_state(struct net_device *dev, u8 state)
+static int dsa_port_set_state(struct dsa_port *dp, u8 state,
+ struct switchdev_trans *trans)
{
- struct dsa_slave_priv *p = netdev_priv(dev);
- struct dsa_port *dp = p->dp;
struct dsa_switch *ds = dp->ds;
int port = dp->index;

+ if (switchdev_trans_ph_prepare(trans))
+ return ds->ops->port_stp_state_set ? 0 : -EOPNOTSUPP;
+
if (ds->ops->port_stp_state_set)
ds->ops->port_stp_state_set(ds, port, state);

@@ -110,6 +112,17 @@ static void dsa_slave_set_state(struct net_device *dev, u8 state)
}

dp->stp_state = state;
+
+ return 0;
+}
+
+static void dsa_port_set_state_now(struct dsa_port *dp, u8 state)
+{
+ int err;
+
+ err = dsa_port_set_state(dp, state, NULL);
+ if (err)
+ pr_err("DSA: failed to set STP state %u (%d)\n", state, err);
}

static int dsa_slave_open(struct net_device *dev)
@@ -147,7 +160,7 @@ static int dsa_slave_open(struct net_device *dev)
goto clear_promisc;
}

- dsa_slave_set_state(dev, stp_state);
+ dsa_port_set_state_now(p->dp, stp_state);

if (p->phy)
phy_start(p->phy);
@@ -189,7 +202,7 @@ static int dsa_slave_close(struct net_device *dev)
if (ds->ops->port_disable)
ds->ops->port_disable(ds, p->dp->index, p->phy);

- dsa_slave_set_state(dev, BR_STATE_DISABLED);
+ dsa_port_set_state_now(p->dp, BR_STATE_DISABLED);

return 0;
}
@@ -386,21 +399,6 @@ static int dsa_slave_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
return -EOPNOTSUPP;
}

-static int dsa_slave_stp_state_set(struct net_device *dev,
- const struct switchdev_attr *attr,
- struct switchdev_trans *trans)
-{
- struct dsa_slave_priv *p = netdev_priv(dev);
- struct dsa_switch *ds = p->dp->ds;
-
- if (switchdev_trans_ph_prepare(trans))
- return ds->ops->port_stp_state_set ? 0 : -EOPNOTSUPP;
-
- dsa_slave_set_state(dev, attr->u.stp_state);
-
- return 0;
-}
-
static int dsa_slave_vlan_filtering(struct net_device *dev,
const struct switchdev_attr *attr,
struct switchdev_trans *trans)
@@ -465,11 +463,13 @@ static int dsa_slave_port_attr_set(struct net_device *dev,
const struct switchdev_attr *attr,
struct switchdev_trans *trans)
{
+ struct dsa_slave_priv *p = netdev_priv(dev);
+ struct dsa_port *dp = p->dp;
int ret;

switch (attr->id) {
case SWITCHDEV_ATTR_ID_PORT_STP_STATE:
- ret = dsa_slave_stp_state_set(dev, attr, trans);
+ ret = dsa_port_set_state(dp, attr->u.stp_state, trans);
break;
case SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING:
ret = dsa_slave_vlan_filtering(dev, attr, trans);
@@ -621,7 +621,7 @@ static void dsa_slave_bridge_port_leave(struct net_device *dev,
/* Port left the bridge, put in BR_STATE_DISABLED by the bridge layer,
* so allow it to be in BR_STATE_FORWARDING to be kept functional
*/
- dsa_slave_set_state(dev, BR_STATE_FORWARDING);
+ dsa_port_set_state_now(p->dp, BR_STATE_FORWARDING);
}

static int dsa_slave_port_attr_get(struct net_device *dev,
--
2.13.0
\
 
 \ /
  Last update: 2017-05-19 23:06    [W:0.171 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site