lkml.org 
[lkml]   [2017]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] clk: Hi3660: change to register crgctrl clock with CLK_OF_DECLARE_DRIVER
Hi Daniel,

On Thu, May 18, 2017 at 11:32:26AM +0200, Daniel Lezcano wrote:
> On Thu, May 18, 2017 at 09:50:46AM +0800, Leo Yan wrote:
> > The timer will register into system at very early phase at kernel boot;
> > if timer needs to use clock, the clock should be get ready in function
> > of_clk_init() so later the timer driver probe can retrieve clock
> > successfully. This is finished in below flow on arm64:
> >
> > start_kernel()
> > `-> time_init()
> > `-> of_clk_init(NULL) => register timer's clock
> > `-> clocksource_probe() => register timer
> >
> > On Hi3660 the sp804 timer uses clock "osc32k", this clock is registered
> > as platform driver rather than CLK_OF_DECLARE_DRIVER method. As result,
> > sp804 timer probe returns failure due if cannot bind clock properly.
> > To fix the failure, this patch is to change crgctrl clock registration
> > from platform driver to CLK_OF_DECLARE_DRIVER method so the clocks can
> > be registered ahead with function of_clk_init() and then timer driver
> > can use it.
> >
> > Signed-off-by: Leo Yan <leo.yan@linaro.org>
> > ---
> > drivers/clk/hisilicon/clk-hi3660.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/clk/hisilicon/clk-hi3660.c b/drivers/clk/hisilicon/clk-hi3660.c
> > index fd5ce7f..4e5713b 100644
> > --- a/drivers/clk/hisilicon/clk-hi3660.c
> > +++ b/drivers/clk/hisilicon/clk-hi3660.c
> > @@ -547,10 +547,10 @@ static void hi3660_clk_crgctrl_init(struct device_node *np)
> > ARRAY_SIZE(hi3660_crgctrl_divider_clks),
> > clk_data);
> > }
> > +CLK_OF_DECLARE_DRIVER(hi3660_clk_crgctrl, "hisilicon,hi3660-crgctrl",
> > + hi3660_clk_crgctrl_init);
> >
> > static const struct of_device_id hi3660_clk_match_table[] = {
> > - { .compatible = "hisilicon,hi3660-crgctrl",
> > - .data = hi3660_clk_crgctrl_init },
> > { .compatible = "hisilicon,hi3660-pctrl",
> > .data = hi3660_clk_pctrl_init },
> > { .compatible = "hisilicon,hi3660-pmuctrl",
>
> Why not do the change for all the clocks and remove the
> hi3660_clk_match_table[]? and all the related platform driver code?
>
> That will be consistent with the other clk-hi* drivers.

I checked a bit with Stephen on IRC, follow the suggestion to 'split
the clks are registsered between CLK_OF_DECLARE_DRIVER() and driver
probe so that the ones you need really early are done through the
CLK_OF path and the other ones are done through regular driver probe'.

Also checked for mainline kernel, now there have some examples,
like: drivers/clk/mediatek/clk-mt2701.c.

Thanks,
Leo Yan

\
 
 \ /
  Last update: 2017-05-18 11:49    [W:0.053 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site