lkml.org 
[lkml]   [2017]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] clk: Hi3660: change to register crgctrl clock with CLK_OF_DECLARE_DRIVER
On Thu, May 18, 2017 at 09:50:46AM +0800, Leo Yan wrote:
> The timer will register into system at very early phase at kernel boot;
> if timer needs to use clock, the clock should be get ready in function
> of_clk_init() so later the timer driver probe can retrieve clock
> successfully. This is finished in below flow on arm64:
>
> start_kernel()
> `-> time_init()
> `-> of_clk_init(NULL) => register timer's clock
> `-> clocksource_probe() => register timer
>
> On Hi3660 the sp804 timer uses clock "osc32k", this clock is registered
> as platform driver rather than CLK_OF_DECLARE_DRIVER method. As result,
> sp804 timer probe returns failure due if cannot bind clock properly.
> To fix the failure, this patch is to change crgctrl clock registration
> from platform driver to CLK_OF_DECLARE_DRIVER method so the clocks can
> be registered ahead with function of_clk_init() and then timer driver
> can use it.
>
> Signed-off-by: Leo Yan <leo.yan@linaro.org>
> ---
> drivers/clk/hisilicon/clk-hi3660.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/hisilicon/clk-hi3660.c b/drivers/clk/hisilicon/clk-hi3660.c
> index fd5ce7f..4e5713b 100644
> --- a/drivers/clk/hisilicon/clk-hi3660.c
> +++ b/drivers/clk/hisilicon/clk-hi3660.c
> @@ -547,10 +547,10 @@ static void hi3660_clk_crgctrl_init(struct device_node *np)
> ARRAY_SIZE(hi3660_crgctrl_divider_clks),
> clk_data);
> }
> +CLK_OF_DECLARE_DRIVER(hi3660_clk_crgctrl, "hisilicon,hi3660-crgctrl",
> + hi3660_clk_crgctrl_init);
>
> static const struct of_device_id hi3660_clk_match_table[] = {
> - { .compatible = "hisilicon,hi3660-crgctrl",
> - .data = hi3660_clk_crgctrl_init },
> { .compatible = "hisilicon,hi3660-pctrl",
> .data = hi3660_clk_pctrl_init },
> { .compatible = "hisilicon,hi3660-pmuctrl",

Why not do the change for all the clocks and remove the
hi3660_clk_match_table[]? and all the related platform driver code?

That will be consistent with the other clk-hi* drivers.

--

<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2017-05-18 11:32    [W:1.439 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site