lkml.org 
[lkml]   [2017]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/8] clocksource/drivers/fttmr010: Merge Moxa into FTTMR010
Date
This merges the Moxa Art timer driver into the Faraday FTTMR010
driver and replaces all Kconfig symbols to use the Faraday
driver instead. We are now so similar that the drivers can
be merged by just adding a few lines to the Faraday timer.

Differences:

- The Faraday driver explicitly sets the counter to count
upwards for the clocksource, removing the need for the
clocksource core to invert the value.

- The Faraday driver also handles sched_clock()

I am just guessing at the way the Aspeed has moved the count
up/down bits to bits 3, 8 and 11 (keeping the bits pertaining
to a certain timer together), so this really needs testing on
the Aspeed. I'm guessing like this because it is what I would
have done, if I was rewriting some VHDL/Verilog to extend
these three timers to 8 (as the Aspeed apparently does).

After this we have one driver for all three SoCs and a generic
Faraday FTTMR010 timer driver, which is nice.

Cc: Joel Stanley <joel@jms.id.au>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ARM SoC folks: please ACK this so it can be merged with in the
clocksource subsystem once it works.

Joel: it would be super if you can test this. If you have some
vendor tree or similar that actually indicates where the
up/down counter bits are it's even better, but I'm hoping that
this half-assed guesswork will JustWork(TM) (yeah, famous
last words, sorry...)
---
arch/arm/mach-aspeed/Kconfig | 2 +-
arch/arm/mach-moxart/Kconfig | 2 +-
drivers/clocksource/Kconfig | 7 -
drivers/clocksource/Makefile | 1 -
drivers/clocksource/moxart_timer.c | 256 -----------------------------------
drivers/clocksource/timer-fttmr010.c | 52 +++++--
6 files changed, 46 insertions(+), 274 deletions(-)
delete mode 100644 drivers/clocksource/moxart_timer.c

diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
index f3f8c5c658db..2d5570e6e186 100644
--- a/arch/arm/mach-aspeed/Kconfig
+++ b/arch/arm/mach-aspeed/Kconfig
@@ -4,7 +4,7 @@ menuconfig ARCH_ASPEED
select SRAM
select WATCHDOG
select ASPEED_WATCHDOG
- select MOXART_TIMER
+ select FTTMR010_TIMER
select MFD_SYSCON
select PINCTRL
help
diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
index 70db2abf6163..a4a91f9a3301 100644
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@@ -4,7 +4,7 @@ menuconfig ARCH_MOXART
select CPU_FA526
select ARM_DMA_MEM_BUFFERABLE
select FARADAY_FTINTC010
- select MOXART_TIMER
+ select FTTMR010_TIMER
select GPIOLIB
select PHYLIB if NETDEVICES
help
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 545d541ae20e..1b22ade4c8f1 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -188,13 +188,6 @@ config ATLAS7_TIMER
help
Enables support for the Atlas7 timer.

-config MOXART_TIMER
- bool "Moxart timer driver" if COMPILE_TEST
- depends on GENERIC_CLOCKEVENTS
- select CLKSRC_MMIO
- help
- Enables support for the Moxart timer.
-
config MXS_TIMER
bool "Mxs timer driver" if COMPILE_TEST
depends on GENERIC_CLOCKEVENTS
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 2b5b56a6f00f..cf0c30b6ec1f 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -26,7 +26,6 @@ obj-$(CONFIG_ORION_TIMER) += time-orion.o
obj-$(CONFIG_BCM2835_TIMER) += bcm2835_timer.o
obj-$(CONFIG_CLPS711X_TIMER) += clps711x-timer.o
obj-$(CONFIG_ATLAS7_TIMER) += timer-atlas7.o
-obj-$(CONFIG_MOXART_TIMER) += moxart_timer.o
obj-$(CONFIG_MXS_TIMER) += mxs_timer.o
obj-$(CONFIG_CLKSRC_PXA) += pxa_timer.o
obj-$(CONFIG_PRIMA2_TIMER) += timer-prima2.o
diff --git a/drivers/clocksource/moxart_timer.c b/drivers/clocksource/moxart_timer.c
deleted file mode 100644
index 7f3430654fbd..000000000000
--- a/drivers/clocksource/moxart_timer.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * MOXA ART SoCs timer handling.
- *
- * Copyright (C) 2013 Jonas Jensen
- *
- * Jonas Jensen <jonas.jensen@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/irqreturn.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/io.h>
-#include <linux/clocksource.h>
-#include <linux/bitops.h>
-#include <linux/slab.h>
-
-#define TIMER1_BASE 0x00
-#define TIMER2_BASE 0x10
-#define TIMER3_BASE 0x20
-
-#define REG_COUNT 0x0 /* writable */
-#define REG_LOAD 0x4
-#define REG_MATCH1 0x8
-#define REG_MATCH2 0xC
-
-#define TIMER_CR 0x30
-#define TIMER_INTR_STATE 0x34
-#define TIMER_INTR_MASK 0x38
-
-/*
- * Moxart TIMER_CR flags:
- *
- * MOXART_CR_*_CLOCK 0: PCLK, 1: EXT1CLK
- * MOXART_CR_*_INT overflow interrupt enable bit
- */
-#define MOXART_CR_1_ENABLE BIT(0)
-#define MOXART_CR_1_CLOCK BIT(1)
-#define MOXART_CR_1_INT BIT(2)
-#define MOXART_CR_2_ENABLE BIT(3)
-#define MOXART_CR_2_CLOCK BIT(4)
-#define MOXART_CR_2_INT BIT(5)
-#define MOXART_CR_3_ENABLE BIT(6)
-#define MOXART_CR_3_CLOCK BIT(7)
-#define MOXART_CR_3_INT BIT(8)
-#define MOXART_CR_COUNT_UP BIT(9)
-
-#define MOXART_TIMER1_ENABLE (MOXART_CR_2_ENABLE | MOXART_CR_1_ENABLE)
-#define MOXART_TIMER1_DISABLE (MOXART_CR_2_ENABLE)
-
-/*
- * The ASpeed variant of the IP block has a different layout
- * for the control register
- */
-#define ASPEED_CR_1_ENABLE BIT(0)
-#define ASPEED_CR_1_CLOCK BIT(1)
-#define ASPEED_CR_1_INT BIT(2)
-#define ASPEED_CR_2_ENABLE BIT(4)
-#define ASPEED_CR_2_CLOCK BIT(5)
-#define ASPEED_CR_2_INT BIT(6)
-#define ASPEED_CR_3_ENABLE BIT(8)
-#define ASPEED_CR_3_CLOCK BIT(9)
-#define ASPEED_CR_3_INT BIT(10)
-
-#define ASPEED_TIMER1_ENABLE (ASPEED_CR_2_ENABLE | ASPEED_CR_1_ENABLE)
-#define ASPEED_TIMER1_DISABLE (ASPEED_CR_2_ENABLE)
-
-struct moxart_timer {
- void __iomem *base;
- unsigned int t1_disable_val;
- unsigned int t1_enable_val;
- unsigned int count_per_tick;
- struct clock_event_device clkevt;
-};
-
-static inline struct moxart_timer *to_moxart(struct clock_event_device *evt)
-{
- return container_of(evt, struct moxart_timer, clkevt);
-}
-
-static inline void moxart_disable(struct clock_event_device *evt)
-{
- struct moxart_timer *timer = to_moxart(evt);
-
- writel(timer->t1_disable_val, timer->base + TIMER_CR);
-}
-
-static inline void moxart_enable(struct clock_event_device *evt)
-{
- struct moxart_timer *timer = to_moxart(evt);
-
- writel(timer->t1_enable_val, timer->base + TIMER_CR);
-}
-
-static int moxart_shutdown(struct clock_event_device *evt)
-{
- moxart_disable(evt);
- return 0;
-}
-
-static int moxart_set_oneshot(struct clock_event_device *evt)
-{
- moxart_disable(evt);
- writel(~0, to_moxart(evt)->base + TIMER1_BASE + REG_LOAD);
- return 0;
-}
-
-static int moxart_set_periodic(struct clock_event_device *evt)
-{
- struct moxart_timer *timer = to_moxart(evt);
-
- moxart_disable(evt);
- writel(timer->count_per_tick, timer->base + TIMER1_BASE + REG_LOAD);
- writel(0, timer->base + TIMER1_BASE + REG_MATCH1);
- moxart_enable(evt);
- return 0;
-}
-
-static int moxart_clkevt_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- struct moxart_timer *timer = to_moxart(evt);
- u32 u;
-
- moxart_disable(evt);
-
- u = readl(timer->base + TIMER1_BASE + REG_COUNT) - cycles;
- writel(u, timer->base + TIMER1_BASE + REG_MATCH1);
-
- moxart_enable(evt);
-
- return 0;
-}
-
-static irqreturn_t moxart_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
- evt->event_handler(evt);
- return IRQ_HANDLED;
-}
-
-static int __init moxart_timer_init(struct device_node *node)
-{
- int ret, irq;
- unsigned long pclk;
- struct clk *clk;
- struct moxart_timer *timer;
-
- timer = kzalloc(sizeof(*timer), GFP_KERNEL);
- if (!timer)
- return -ENOMEM;
-
- timer->base = of_iomap(node, 0);
- if (!timer->base) {
- pr_err("%s: of_iomap failed\n", node->full_name);
- ret = -ENXIO;
- goto out_free;
- }
-
- irq = irq_of_parse_and_map(node, 0);
- if (irq <= 0) {
- pr_err("%s: irq_of_parse_and_map failed\n", node->full_name);
- ret = -EINVAL;
- goto out_unmap;
- }
-
- clk = of_clk_get(node, 0);
- if (IS_ERR(clk)) {
- pr_err("%s: of_clk_get failed\n", node->full_name);
- ret = PTR_ERR(clk);
- goto out_unmap;
- }
-
- pclk = clk_get_rate(clk);
-
- if (of_device_is_compatible(node, "moxa,moxart-timer")) {
- timer->t1_enable_val = MOXART_TIMER1_ENABLE;
- timer->t1_disable_val = MOXART_TIMER1_DISABLE;
- } else if (of_device_is_compatible(node, "aspeed,ast2400-timer")) {
- timer->t1_enable_val = ASPEED_TIMER1_ENABLE;
- timer->t1_disable_val = ASPEED_TIMER1_DISABLE;
- } else {
- pr_err("%s: unknown platform\n", node->full_name);
- ret = -EINVAL;
- goto out_unmap;
- }
-
- timer->count_per_tick = DIV_ROUND_CLOSEST(pclk, HZ);
-
- timer->clkevt.name = node->name;
- timer->clkevt.rating = 200;
- timer->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT;
- timer->clkevt.set_state_shutdown = moxart_shutdown;
- timer->clkevt.set_state_periodic = moxart_set_periodic;
- timer->clkevt.set_state_oneshot = moxart_set_oneshot;
- timer->clkevt.tick_resume = moxart_set_oneshot;
- timer->clkevt.set_next_event = moxart_clkevt_next_event;
- timer->clkevt.cpumask = cpumask_of(0);
- timer->clkevt.irq = irq;
-
- ret = clocksource_mmio_init(timer->base + TIMER2_BASE + REG_COUNT,
- "moxart_timer", pclk, 200, 32,
- clocksource_mmio_readl_down);
- if (ret) {
- pr_err("%s: clocksource_mmio_init failed\n", node->full_name);
- goto out_unmap;
- }
-
- ret = request_irq(irq, moxart_timer_interrupt, IRQF_TIMER,
- node->name, &timer->clkevt);
- if (ret) {
- pr_err("%s: setup_irq failed\n", node->full_name);
- goto out_unmap;
- }
-
- /* Clear match registers */
- writel(0, timer->base + TIMER1_BASE + REG_MATCH1);
- writel(0, timer->base + TIMER1_BASE + REG_MATCH2);
- writel(0, timer->base + TIMER2_BASE + REG_MATCH1);
- writel(0, timer->base + TIMER2_BASE + REG_MATCH2);
-
- /*
- * Start timer 2 rolling as our main wall clock source, keep timer 1
- * disabled
- */
- writel(0, timer->base + TIMER_CR);
- writel(~0, timer->base + TIMER2_BASE + REG_LOAD);
- writel(timer->t1_disable_val, timer->base + TIMER_CR);
-
- /*
- * documentation is not publicly available:
- * min_delta / max_delta obtained by trial-and-error,
- * max_delta 0xfffffffe should be ok because count
- * register size is u32
- */
- clockevents_config_and_register(&timer->clkevt, pclk, 0x4, 0xfffffffe);
-
- return 0;
-
-out_unmap:
- iounmap(timer->base);
-out_free:
- kfree(timer);
- return ret;
-}
-CLOCKSOURCE_OF_DECLARE(moxart, "moxa,moxart-timer", moxart_timer_init);
-CLOCKSOURCE_OF_DECLARE(aspeed, "aspeed,ast2400-timer", moxart_timer_init);
diff --git a/drivers/clocksource/timer-fttmr010.c b/drivers/clocksource/timer-fttmr010.c
index 2d915d1455ab..86d5159d3457 100644
--- a/drivers/clocksource/timer-fttmr010.c
+++ b/drivers/clocksource/timer-fttmr010.c
@@ -50,6 +50,20 @@
#define TIMER_2_CR_UPDOWN BIT(10)
#define TIMER_3_CR_UPDOWN BIT(11)

+/* The Aspeed AST2400 moves bits around in the control register */
+#define TIMER_1_CR_ASPEED_ENABLE BIT(0)
+#define TIMER_1_CR_ASPEED_CLOCK BIT(1)
+#define TIMER_1_CR_ASPEED_INT BIT(2)
+#define TIMER_1_CR_ASPEED_UPDOWN BIT(3)
+#define TIMER_2_CR_ASPEED_ENABLE BIT(4)
+#define TIMER_2_CR_ASPEED_CLOCK BIT(5)
+#define TIMER_2_CR_ASPEED_INT BIT(6)
+#define TIMER_2_CR_ASPEED_UPDOWN BIT(7)
+#define TIMER_3_CR_ASPEED_ENABLE BIT(8)
+#define TIMER_3_CR_ASPEED_CLOCK BIT(9)
+#define TIMER_3_CR_ASPEED_INT BIT(10)
+#define TIMER_3_CR_ASPEED_UPDOWN BIT(11)
+
#define TIMER_1_INT_MATCH1 BIT(0)
#define TIMER_1_INT_MATCH2 BIT(1)
#define TIMER_1_INT_OVERFLOW BIT(2)
@@ -64,6 +78,8 @@
struct fttmr010 {
void __iomem *base;
unsigned int tick_rate;
+ bool is_ast2400;
+ u32 t1_enable_val;
struct clock_event_device clkevt;
};

@@ -102,7 +118,7 @@ static int fttmr010_timer_shutdown(struct clock_event_device *evt)

/* Stop timer and interrupt. */
cr = readl(fttmr010->base + TIMER_CR);
- cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
+ cr &= ~fttmr010->t1_enable_val;
writel(cr, fttmr010->base + TIMER_CR);

return 0;
@@ -115,7 +131,7 @@ static int fttmr010_timer_set_oneshot(struct clock_event_device *evt)

/* Stop timer and interrupt. */
cr = readl(fttmr010->base + TIMER_CR);
- cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
+ cr &= ~fttmr010->t1_enable_val;
writel(cr, fttmr010->base + TIMER_CR);

/* Setup counter start from 0 */
@@ -130,7 +146,7 @@ static int fttmr010_timer_set_oneshot(struct clock_event_device *evt)

/* Start the timer */
cr = readl(fttmr010->base + TIMER_CR);
- cr |= TIMER_1_CR_ENABLE;
+ cr |= fttmr010->t1_enable_val;
writel(cr, fttmr010->base + TIMER_CR);

return 0;
@@ -144,7 +160,7 @@ static int fttmr010_timer_set_periodic(struct clock_event_device *evt)

/* Stop timer and interrupt */
cr = readl(fttmr010->base + TIMER_CR);
- cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
+ cr &= ~fttmr010->t1_enable_val;
writel(cr, fttmr010->base + TIMER_CR);

/* Setup timer to fire at 1/HT intervals. */
@@ -160,8 +176,7 @@ static int fttmr010_timer_set_periodic(struct clock_event_device *evt)

/* Start the timer */
cr = readl(fttmr010->base + TIMER_CR);
- cr |= TIMER_1_CR_ENABLE;
- cr |= TIMER_1_CR_INT;
+ cr |= fttmr010->t1_enable_val;
writel(cr, fttmr010->base + TIMER_CR);

return 0;
@@ -184,6 +199,7 @@ static int __init fttmr010_timer_init(struct device_node *np)
int irq;
struct clk *clk;
int ret;
+ u32 val;

/*
* These implementations require a clock reference.
@@ -223,13 +239,31 @@ static int __init fttmr010_timer_init(struct device_node *np)
}

/*
+ * The Aspeed AST2400 moves bits around in the control register,
+ * otherwise it works the same.
+ */
+ fttmr010->is_ast2400 =
+ of_device_is_compatible(np, "aspeed,ast2400-timer");
+ if (fttmr010->is_ast2400)
+ fttmr010->t1_enable_val = TIMER_1_CR_ASPEED_ENABLE |
+ TIMER_1_CR_ASPEED_INT;
+ else
+ fttmr010->t1_enable_val = TIMER_1_CR_ENABLE | TIMER_1_CR_INT;
+
+ /*
* Reset the interrupt mask and status
*/
writel(TIMER_INT_ALL_MASK, fttmr010->base + TIMER_INTR_MASK);
writel(0, fttmr010->base + TIMER_INTR_STATE);
+
/* Enable timer 1 count up, timer 2 count up */
- writel((TIMER_1_CR_UPDOWN | TIMER_2_CR_ENABLE | TIMER_2_CR_UPDOWN),
- fttmr010->base + TIMER_CR);
+ if (fttmr010->is_ast2400)
+ val = TIMER_1_CR_ASPEED_UPDOWN | TIMER_2_CR_ASPEED_ENABLE |
+ TIMER_2_CR_ASPEED_UPDOWN;
+ else
+ val = TIMER_1_CR_UPDOWN | TIMER_2_CR_ENABLE |
+ TIMER_2_CR_UPDOWN;
+ writel(val, fttmr010->base + TIMER_CR);

/*
* Setup free-running clocksource timer (interrupts
@@ -290,3 +324,5 @@ static int __init fttmr010_timer_init(struct device_node *np)
}
CLOCKSOURCE_OF_DECLARE(fttmr010, "faraday,fttmr010", fttmr010_timer_init);
CLOCKSOURCE_OF_DECLARE(gemini, "cortina,gemini-timer", fttmr010_timer_init);
+CLOCKSOURCE_OF_DECLARE(moxart, "moxa,moxart-timer", fttmr010_timer_init);
+CLOCKSOURCE_OF_DECLARE(aspeed, "aspeed,ast2400-timer", fttmr010_timer_init);
--
2.9.3
\
 
 \ /
  Last update: 2017-05-17 16:08    [W:1.877 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site