lkml.org 
[lkml]   [2017]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/2] net-next: stmmac: add adjust_link function
On Tue, May 16, 2017 at 09:43:04AM -0700, Florian Fainelli wrote:
> On 05/15/2017 04:41 AM, Corentin Labbe wrote:
> > My dwmac-sun8i serie will add some if (has_sun8i) to
> > stmmac_adjust_link()
> > Since the current stmmac_adjust_link() alreaady have lots of if (has_gmac/gmac4),
> > It is now better to create an adjust_link() function for each dwmac.
>
> Is it really, because the diffstat really seems to indicate otherwise
> and by looking at the code, I am definitively not convinced this is an
> improvement other the current code.
>
> >
> > So this patch add an adjust_link() function pointer, and move code out
> > of stmmac_adjust_link to it.
>
> Can't we keep the existing adjust_link() function and just have a
> different one for dwmac-sun8i that either re-uses portions of the
> existing, or duplicate just what it needs?
>

I have done this work because the maintainer thinked it was a good idea (and so am I)
See https://www.mail-archive.com/netdev@vger.kernel.org/msg167484.html

You can see also the necessary modification of adjust_link for dwmac-sun8i here: http://lists.infradead.org/pipermail/linux-arm-kernel/2017-May/504034.html
I agree that without dwmac-sun8i, this patch is near uncessary, but with it I add 4 "if (sun8i)".

Anyway I will fix all problem you reported below.

Thanks
Regards

> >
> > Removing in the process stmmac_mac_flow_ctrl/stmmac_hw_fix_mac_speed
> > since there not used anymore.
> >
> > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > ---
> > drivers/net/ethernet/stmicro/stmmac/common.h | 3 +
> > .../net/ethernet/stmicro/stmmac/dwmac1000_core.c | 54 ++++++++++++++
> > .../net/ethernet/stmicro/stmmac/dwmac100_core.c | 46 ++++++++++++
> > drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 54 ++++++++++++++
> > drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 83 +---------------------
> > 5 files changed, 158 insertions(+), 82 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
> > index b7ce3fbb5375..451c231006fe 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/common.h
> > +++ b/drivers/net/ethernet/stmicro/stmmac/common.h
> > @@ -469,11 +469,14 @@ struct stmmac_dma_ops {
> > };
> >
> > struct mac_device_info;
> > +struct stmmac_priv;
> >
> > /* Helpers to program the MAC core */
> > struct stmmac_ops {
> > /* MAC core initialization */
> > void (*core_init)(struct mac_device_info *hw, int mtu);
> > + /* adjust link */
> > + int (*adjust_link)(struct stmmac_priv *priv);
> > /* Enable the MAC RX/TX */
> > void (*set_mac)(void __iomem *ioaddr, bool enable);
> > /* Enable and verify that the IPC module is supported */
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
> > index f3d9305e5f70..5f3aace46c41 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
> > @@ -26,6 +26,7 @@
> > #include <linux/slab.h>
> > #include <linux/ethtool.h>
> > #include <asm/io.h>
> > +#include "stmmac.h"
> > #include "stmmac_pcs.h"
> > #include "dwmac1000.h"
> >
> > @@ -75,6 +76,58 @@ static void dwmac1000_core_init(struct mac_device_info *hw, int mtu)
> > #endif
> > }
> >
> > +static int dwmac1000_adjust_link(struct stmmac_priv *priv)
> > +{
> > + struct net_device *ndev = priv->dev;
> > + struct phy_device *phydev = ndev->phydev;
> > + int new_state = 0;
> > + u32 tx_cnt = priv->plat->tx_queues_to_use;
> > + u32 ctrl;
>
> Reverse christmas tree declaration please.
>
> > +
> > + ctrl = readl(priv->ioaddr + GMAC_CONTROL);
> > +
> > + if (phydev->duplex != priv->oldduplex) {
> > + new_state = 1;
>
> bool new_state
>
> > + if (!(phydev->duplex))
>
> Parenthesis not needed (this is an integer, not a bitmask)
>
> > + ctrl &= ~GMAC_CONTROL_DM;
> > + else
> > + ctrl |= GMAC_CONTROL_DM;
> > + priv->oldduplex = phydev->duplex;
> > + }
> > +
> > + if (phydev->pause)
> > + priv->hw->mac->flow_ctrl(priv->hw, phydev->duplex, priv->flow_ctrl,
> > + priv->pause, tx_cnt);
> > +
> > + if (phydev->speed != priv->speed) {
> > + new_state = 1;
> > + switch (phydev->speed) {
> > + case 1000:
>
> case SPEED_1000 and so on?
>
> > + ctrl &= ~GMAC_CONTROL_PS;
> > + break;
> > + case 100:
> > + ctrl |= GMAC_CONTROL_PS;
> > + ctrl |= GMAC_CONTROL_FES;
> > + break;
> > + case 10:
> > + ctrl |= GMAC_CONTROL_PS;
> > + ctrl |= ~GMAC_CONTROL_FES;
> > + break;
> > + default:
> > + netif_warn(priv, link, priv->dev,
> > + "broken speed: %d\n", phydev->speed);
> > + phydev->speed = SPEED_UNKNOWN;
> > + break;
> > + }
> > + if (phydev->speed != SPEED_UNKNOWN && likely(priv->plat->fix_mac_speed))
> > + priv->plat->fix_mac_speed(priv->plat->bsp_priv, phydev->speed);
> > + priv->speed = phydev->speed;
> > + }
> > +
> > + writel(ctrl, priv->ioaddr + GMAC_CONTROL);
> > + return new_state;
> > +}
> > +
> > static int dwmac1000_rx_ipc_enable(struct mac_device_info *hw)
> > {
> > void __iomem *ioaddr = hw->pcsr;
> > @@ -490,6 +543,7 @@ static void dwmac1000_debug(void __iomem *ioaddr, struct stmmac_extra_stats *x,
> >
> > static const struct stmmac_ops dwmac1000_ops = {
> > .core_init = dwmac1000_core_init,
> > + .adjust_link = dwmac1000_adjust_link,
> > .set_mac = stmmac_set_mac,
> > .rx_ipc = dwmac1000_rx_ipc_enable,
> > .dump_regs = dwmac1000_dump_regs,
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
> > index 1b3609105484..ba3d46e65e1a 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
> > @@ -27,6 +27,7 @@
> > #include <linux/crc32.h>
> > #include <asm/io.h>
> > #include "dwmac100.h"
> > +#include "stmmac.h"
> >
> > static void dwmac100_core_init(struct mac_device_info *hw, int mtu)
> > {
> > @@ -40,6 +41,50 @@ static void dwmac100_core_init(struct mac_device_info *hw, int mtu)
> > #endif
> > }
> >
> > +static int dwmac100_adjust_link(struct stmmac_priv *priv)
> > +{
> > + struct net_device *ndev = priv->dev;
> > + struct phy_device *phydev = ndev->phydev;
> > + int new_state = 0;
> > + u32 tx_cnt = priv->plat->tx_queues_to_use;
> > + u32 ctrl;
> > +
> > + ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
> > + if (phydev->duplex != priv->oldduplex) {
> > + new_state = 1;
> > + if (!(phydev->duplex))
> > + ctrl &= ~MAC_CONTROL_F;
> > + else
> > + ctrl |= MAC_CONTROL_F;
> > + priv->oldduplex = phydev->duplex;
> > + }
> > +
> > + if (phydev->pause)
> > + priv->hw->mac->flow_ctrl(priv->hw, phydev->duplex, priv->flow_ctrl,
> > + priv->pause, tx_cnt);
> > +
> > + if (phydev->speed != priv->speed) {
> > + new_state = 1;
> > + switch (phydev->speed) {
> > + case 100:
> > + case 10:
> > + ctrl &= ~MAC_CONTROL_PS;
> > + break;
> > + default:
> > + netif_warn(priv, link, priv->dev,
> > + "broken speed: %d\n", phydev->speed);
> > + phydev->speed = SPEED_UNKNOWN;
> > + break;
> > + }
> > + if (phydev->speed != SPEED_UNKNOWN && likely(priv->plat->fix_mac_speed))
> > + priv->plat->fix_mac_speed(priv->plat->bsp_priv, phydev->speed);
> > + priv->speed = phydev->speed;
> > + }
> > +
> > + writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
> > + return new_state;
> > +}
> > +
> > static void dwmac100_dump_mac_regs(struct mac_device_info *hw, u32 *reg_space)
> > {
> > void __iomem *ioaddr = hw->pcsr;
> > @@ -150,6 +195,7 @@ static void dwmac100_pmt(struct mac_device_info *hw, unsigned long mode)
> >
> > static const struct stmmac_ops dwmac100_ops = {
> > .core_init = dwmac100_core_init,
> > + .adjust_link = dwmac100_adjust_link,
> > .set_mac = stmmac_set_mac,
> > .rx_ipc = dwmac100_rx_ipc_enable,
> > .dump_regs = dwmac100_dump_mac_regs,
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
> > index 48793f2e9307..133b6bcd7b61 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
> > @@ -19,6 +19,7 @@
> > #include <linux/io.h>
> > #include "stmmac_pcs.h"
> > #include "dwmac4.h"
> > +#include "stmmac.h"
> >
> > static void dwmac4_core_init(struct mac_device_info *hw, int mtu)
> > {
> > @@ -59,6 +60,58 @@ static void dwmac4_core_init(struct mac_device_info *hw, int mtu)
> > writel(value, ioaddr + GMAC_INT_EN);
> > }
> >
> > +static int dwmac4_adjust_link(struct stmmac_priv *priv)
> > +{
> > + struct net_device *ndev = priv->dev;
> > + struct phy_device *phydev = ndev->phydev;
> > + int new_state = 0;
> > + u32 tx_cnt = priv->plat->tx_queues_to_use;
> > + u32 ctrl;
> > +
> > + ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
> > +
> > + if (phydev->duplex != priv->oldduplex) {
> > + new_state = 1;
> > + if (!(phydev->duplex))
> > + ctrl &= ~GMAC_CONFIG_DM;
> > + else
> > + ctrl |= GMAC_CONFIG_DM;
> > + priv->oldduplex = phydev->duplex;
> > + }
> > +
> > + if (phydev->pause)
> > + priv->hw->mac->flow_ctrl(priv->hw, phydev->duplex, priv->flow_ctrl,
> > + priv->pause, tx_cnt);
> > +
> > + if (phydev->speed != priv->speed) {
> > + new_state = 1;
> > + switch (phydev->speed) {
> > + case 1000:
> > + ctrl &= ~GMAC_CONFIG_PS;
> > + break;
> > + case 100:
> > + ctrl |= GMAC_CONFIG_PS;
> > + ctrl |= GMAC_CONFIG_FES;
> > + break;
> > + case 10:
> > + ctrl |= GMAC_CONFIG_PS;
> > + ctrl |= ~GMAC_CONFIG_FES;
> > + break;
> > + default:
> > + netif_warn(priv, link, priv->dev,
> > + "broken speed: %d\n", phydev->speed);
> > + phydev->speed = SPEED_UNKNOWN;
> > + break;
> > + }
> > + if (phydev->speed != SPEED_UNKNOWN && likely(priv->plat->fix_mac_speed))
> > + priv->plat->fix_mac_speed(priv->plat->bsp_priv, phydev->speed);
> > + priv->speed = phydev->speed;
> > + }
> > +
> > + writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
> > + return new_state;
> > +}
> > +
> > static void dwmac4_rx_queue_enable(struct mac_device_info *hw,
> > u8 mode, u32 queue)
> > {
> > @@ -669,6 +722,7 @@ static void dwmac4_debug(void __iomem *ioaddr, struct stmmac_extra_stats *x,
> >
> > static const struct stmmac_ops dwmac4_ops = {
> > .core_init = dwmac4_core_init,
> > + .adjust_link = dwmac4_adjust_link,
> > .set_mac = stmmac_set_mac,
> > .rx_ipc = dwmac4_rx_ipc_enable,
> > .rx_queue_enable = dwmac4_rx_queue_enable,
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > index b05a042cf2c6..fb3e2ddaa7c9 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > @@ -286,21 +286,6 @@ static inline u32 stmmac_rx_dirty(struct stmmac_priv *priv, u32 queue)
> > }
> >
> > /**
> > - * stmmac_hw_fix_mac_speed - callback for speed selection
> > - * @priv: driver private structure
> > - * Description: on some platforms (e.g. ST), some HW system configuration
> > - * registers have to be set according to the link speed negotiated.
> > - */
> > -static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
> > -{
> > - struct net_device *ndev = priv->dev;
> > - struct phy_device *phydev = ndev->phydev;
> > -
> > - if (likely(priv->plat->fix_mac_speed))
> > - priv->plat->fix_mac_speed(priv->plat->bsp_priv, phydev->speed);
> > -}
> > -
> > -/**
> > * stmmac_enable_eee_mode - check and enter in LPI mode
> > * @priv: driver private structure
> > * Description: this function is to verify and enter in LPI mode in case of
> > @@ -759,19 +744,6 @@ static void stmmac_release_ptp(struct stmmac_priv *priv)
> > }
> >
> > /**
> > - * stmmac_mac_flow_ctrl - Configure flow control in all queues
> > - * @priv: driver private structure
> > - * Description: It is used for configuring the flow control in all queues
> > - */
> > -static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex)
> > -{
> > - u32 tx_cnt = priv->plat->tx_queues_to_use;
> > -
> > - priv->hw->mac->flow_ctrl(priv->hw, duplex, priv->flow_ctrl,
> > - priv->pause, tx_cnt);
> > -}
> > -
> > -/**
> > * stmmac_adjust_link - adjusts the link parameters
> > * @dev: net device structure
> > * Description: this is the helper called by the physical abstraction layer
> > @@ -793,60 +765,7 @@ static void stmmac_adjust_link(struct net_device *dev)
> > spin_lock_irqsave(&priv->lock, flags);
> >
> > if (phydev->link) {
> > - u32 ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
> > -
> > - /* Now we make sure that we can be in full duplex mode.
> > - * If not, we operate in half-duplex mode. */
> > - if (phydev->duplex != priv->oldduplex) {
> > - new_state = 1;
> > - if (!(phydev->duplex))
> > - ctrl &= ~priv->hw->link.duplex;
> > - else
> > - ctrl |= priv->hw->link.duplex;
> > - priv->oldduplex = phydev->duplex;
> > - }
> > - /* Flow Control operation */
> > - if (phydev->pause)
> > - stmmac_mac_flow_ctrl(priv, phydev->duplex);
> > -
> > - if (phydev->speed != priv->speed) {
> > - new_state = 1;
> > - switch (phydev->speed) {
> > - case 1000:
> > - if (priv->plat->has_gmac ||
> > - priv->plat->has_gmac4)
> > - ctrl &= ~priv->hw->link.port;
> > - break;
> > - case 100:
> > - if (priv->plat->has_gmac ||
> > - priv->plat->has_gmac4) {
> > - ctrl |= priv->hw->link.port;
> > - ctrl |= priv->hw->link.speed;
> > - } else {
> > - ctrl &= ~priv->hw->link.port;
> > - }
> > - break;
> > - case 10:
> > - if (priv->plat->has_gmac ||
> > - priv->plat->has_gmac4) {
> > - ctrl |= priv->hw->link.port;
> > - ctrl &= ~(priv->hw->link.speed);
> > - } else {
> > - ctrl &= ~priv->hw->link.port;
> > - }
> > - break;
> > - default:
> > - netif_warn(priv, link, priv->dev,
> > - "broken speed: %d\n", phydev->speed);
> > - phydev->speed = SPEED_UNKNOWN;
> > - break;
> > - }
> > - if (phydev->speed != SPEED_UNKNOWN)
> > - stmmac_hw_fix_mac_speed(priv);
> > - priv->speed = phydev->speed;
> > - }
> > -
> > - writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
> > + new_state = priv->hw->mac->adjust_link(priv);
> >
> > if (!priv->oldlink) {
> > new_state = 1;
> >
>
>
> --
> Florian

\
 
 \ /
  Last update: 2017-05-16 21:04    [W:0.244 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site