lkml.org 
[lkml]   [2017]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] Documentation: add sprd clock bindings
Date
This patch adds a new directory under the 'clock' for Spreadtrum platform,
also bindings which document compatible strings and properties used for
devicetree node of clocks on Spreadtrum SoCs.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
.../clock/sprd/sprd,adjustable-pll-clock.txt | 17 +++++
.../bindings/clock/sprd/sprd,composite-clock.txt | 28 +++++++++
.../bindings/clock/sprd/sprd,divider-clock.txt | 24 +++++++
.../bindings/clock/sprd/sprd,gates-clock.txt | 73 ++++++++++++++++++++++
.../bindings/clock/sprd/sprd,muxed-clock.txt | 23 +++++++
5 files changed, 165 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/sprd/sprd,adjustable-pll-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/sprd/sprd,composite-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/sprd/sprd,divider-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/sprd/sprd,gates-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/sprd/sprd,muxed-clock.txt

diff --git a/Documentation/devicetree/bindings/clock/sprd/sprd,adjustable-pll-clock.txt b/Documentation/devicetree/bindings/clock/sprd/sprd,adjustable-pll-clock.txt
new file mode 100644
index 0000000..476e315
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd/sprd,adjustable-pll-clock.txt
@@ -0,0 +1,17 @@
+Spreadtrum adjustable pll clock driver
+
+Required properties:
+
+- compatible : must be one of:
+ "sprd,sc9836-adjustable-pll-clock"
+ "sprd,sc9860-adjustable-pll-clock"
+
+Example:
+ clk_mpll0: clk@40400024 {
+ compatible = "sprd,sc9860-adjustable-pll-clock";
+ #clock-cells = <0>;
+ reg = <0 0x40400024 0 0x4>,
+ <0 0x40400028 0 0x4>;
+ clocks = <&clk_mpll_gates 2>;
+ clock-output-names = "clk_mpll0";
+ };
diff --git a/Documentation/devicetree/bindings/clock/sprd/sprd,composite-clock.txt b/Documentation/devicetree/bindings/clock/sprd/sprd,composite-clock.txt
new file mode 100644
index 0000000..a476eb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd/sprd,composite-clock.txt
@@ -0,0 +1,28 @@
+Spreadtrum composite clock driver.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+
+- compatible: should be "sprd,composite-clock"
+
+- sprd,mux-msk: arbitrary bitmask for selecting clock input
+
+- sprd,div-msk: arbitrary bitmask for programming the divider,
+ denominator of divider is the value consisted
+ of these bits plus 1
+
+Example:
+
+ clk_sensor: clk@60e00024 {
+ compatible = "sprd,composite-clock";
+ #clock-cells = <0>;
+ reg = <0 0x60e00024 0 0x4>;
+ clocks = <&ext_26m>, <&clk_twpll_48m_def>,
+ <&clk_twpll_76m8_def>, <&clk_twpll_96m_def>;
+ clock-output-names = "clk_sensor";
+ sprd,mux-msk = <0x3>;
+ sprd,div-msk = <0x700>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/sprd/sprd,divider-clock.txt b/Documentation/devicetree/bindings/clock/sprd/sprd,divider-clock.txt
new file mode 100644
index 0000000..0bfc0ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd/sprd,divider-clock.txt
@@ -0,0 +1,24 @@
+Spreadtrum divider clock driver which only supports simple indexed divider
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+
+- compatible : should be "sprd,divider-clock"
+
+- sprd,div-msk: arbitrary bitmask for programming the divider,
+ denominator of divider is the value consisted
+ of these bits plus 1.
+
+Example:
+
+ clk_sdio0_1x: clk@402d032c {
+ compatible = "sprd,divider-clock";
+ #clock-cells = <0>;
+ reg = <0 0x402d032c 0 0x4>;
+ sprd,div-msk = <0x100>;
+ clocks = <&clk_sdio0_2x>;
+ clock-output-names = "clk_sdio0_1x";
+ };
diff --git a/Documentation/devicetree/bindings/clock/sprd/sprd,gates-clock.txt b/Documentation/devicetree/bindings/clock/sprd/sprd,gates-clock.txt
new file mode 100644
index 0000000..f23ecb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd/sprd,gates-clock.txt
@@ -0,0 +1,73 @@
+Spreadtrum gate clock driver
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Spreadtrum's SoCs often use one register to control more than one gate clocks.
+Clock consumers can use index to get the correct gate clock.
+
+In Spreadtrum platform, some of gate clocks have three registers, respectively
+used for controlling, setting and clearing gate clock, the addresses of
+these three registers generally are <start>, <start + offset>, and
+<start + offset * 2>, and offset would be 0x1000 or 0x100, so the register
+size of gate clocks is either 0x3000 or 0x300. While for some historical issue
+there also are some clocks which don't have independent set/clear registers.
+Please see bellow for more specific information.
+
+Required properties:
+
+- compatible: should be one of the following:
+ "sprd,sc1000-gates-clock"
+ - offset of the registers for setting gate is 0x1000
+
+ "sprd,sc100-gates-clock"
+ - offset of the registers for setting gate is 0x100
+
+ "sprd,gates-clock"
+ - for clocks without independent set/clear registers
+
+- reg: the first cell represents the address of this clock gate controller
+ register, the second cell implies how is the offset of set/clear
+ registers of this clock gate, like addressed in the head of this
+ file
+
+optional properties:
+
+- clock-indices: If the identifying number for the clocks in the node
+ is not linear from zero, this property is necessary
+
+Example:
+
+ clk_mpll_gates: clk@402b00b0 {
+ compatible = "sprd,sc1000-gates-clock";
+ #clock-cells = <1>;
+ reg = <0 0x402b00b0 0 0x3000>;
+ clocks = <&ext_26m>;
+ clock-indices = <2>, <18>;
+ clock-output-names = "clk_mpll0_gate", "clk_mpll1_gate";
+ };
+
+Below are two examples of how consumers use the gate clock.
+The 'clk_mpll0' uses index 2 of 'clk_mpll_gates' and 'clk_mpll1'
+uses index 18.
+
+Examples:
+
+ clk_mpll0: clk@40400024 {
+ compatible = "sprd,sc9860-adjustable-pll-clock";
+ #clock-cells = <0>;
+ reg = <0 0x40400024 0 0x4>,
+ <0 0x40400028 0 0x4>;
+ clocks = <&clk_mpll_gates 2>;
+ clock-output-names = "clk_mpll0";
+ };
+
+ clk_mpll1: clk@4040002c {
+ compatible = "sprd,sc9860-adjustable-pll-clock";
+ #clock-cells = <0>;
+ reg = <0 0x4040002c 0 0x4>,
+ <0 0x40400030 0 0x4>;
+ clocks = <&clk_mpll_gates 18>;
+ clock-output-names = "clk_mpll1";
+ };
diff --git a/Documentation/devicetree/bindings/clock/sprd/sprd,muxed-clock.txt b/Documentation/devicetree/bindings/clock/sprd/sprd,muxed-clock.txt
new file mode 100644
index 0000000..b752977
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd/sprd,muxed-clock.txt
@@ -0,0 +1,23 @@
+Spreadtrum multiplexed clock driver
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+
+- compatible : should be "sprd,muxed-clock"
+
+- sprd,mux-msk: arbitrary bitmask for selecting clock input
+
+Example:
+
+ clk_adi: clk@402d0234 {
+ compatible = "sprd,muxed-clock";
+ #clock-cells = <0>;
+ reg = <0 0x402d0234 0 0x4>;
+ sprd,mux-msk = <0x7>;
+ clocks = <&clk_rco_4m>, <&ext_26m>, <&clk_rco_25m>,
+ <&clk_twpll_38m4>, <&clk_twpll_51m2>;
+ clock-output-names = "clk_adi";
+ };
--
2.7.4
\
 
 \ /
  Last update: 2017-05-15 10:42    [W:0.074 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site