lkml.org 
[lkml]   [2017]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectApplied "spi: imx: dynamic burst length adjust for PIO mode" to the spi tree
The patch

spi: imx: dynamic burst length adjust for PIO mode

has been applied to the spi tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 8d4a6cad7adb3ddac32cd52635f20e11de11a658 Mon Sep 17 00:00:00 2001
From: Jiada Wang <jiada_wang@mentor.com>
Date: Mon, 1 May 2017 03:31:44 -0700
Subject: [PATCH] spi: imx: dynamic burst length adjust for PIO mode

previously burst length (BURST_LENGTH) is always set to equal
to bits_per_word, causes a 10us gap between each word in
transfer, which significantly affects performance.

This patch uses 32 bits transfer to simulate lower bits transfer,
and adjusts burst length runtimely to use biggeest burst length
as possible to reduce the gaps in transfer for PIO mode.

Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-imx.c | 157 +++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 149 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index b402530a7a9a..782045f0d79e 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -56,9 +56,11 @@

/* The maximum bytes that a sdma BD can transfer.*/
#define MAX_SDMA_BD_BYTES (1 << 15)
+#define MX51_ECSPI_CTRL_MAX_BURST 512
struct spi_imx_config {
unsigned int speed_hz;
unsigned int bpw;
+ unsigned int len;
};

enum spi_imx_devtype {
@@ -97,12 +99,14 @@ struct spi_imx_data {
unsigned int bytes_per_word;
unsigned int spi_drctl;

- unsigned int count;
+ unsigned int count, count_index;
void (*tx)(struct spi_imx_data *);
void (*rx)(struct spi_imx_data *);
void *rx_buf;
const void *tx_buf;
unsigned int txfifo; /* number of words pushed in tx FIFO */
+ unsigned int dynamic_burst, bpw_rx;
+ unsigned int bpw_w;

/* DMA */
bool usedma;
@@ -252,6 +256,7 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
#define MX51_ECSPI_CTRL_PREDIV_OFFSET 12
#define MX51_ECSPI_CTRL_CS(cs) ((cs) << 18)
#define MX51_ECSPI_CTRL_BL_OFFSET 20
+#define MX51_ECSPI_CTRL_BL_MASK (0xfff << 20)

#define MX51_ECSPI_CONFIG 0x0c
#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0))
@@ -279,6 +284,71 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
#define MX51_ECSPI_TESTREG 0x20
#define MX51_ECSPI_TESTREG_LBC BIT(31)

+static void spi_imx_u32_swap_u8(struct spi_transfer *transfer, u32 *buf)
+{
+ int i;
+
+ for (i = 0; i < transfer->len / 4; i++)
+ *(buf + i) = cpu_to_be32(*(buf + i));
+}
+
+static void spi_imx_u32_swap_u16(struct spi_transfer *transfer, u32 *buf)
+{
+ int i;
+
+ for (i = 0; i < transfer->len / 4; i++) {
+ u16 *temp = (u16 *)buf;
+
+ *(temp + i * 2) = cpu_to_be16(*(temp + i * 2));
+ *(temp + i * 2 + 1) = cpu_to_be16(*(temp + i * 2 + 1));
+
+ *(buf + i) = cpu_to_be32(*(buf + i));
+ }
+}
+
+static void spi_imx_buf_rx_swap(struct spi_imx_data *spi_imx)
+{
+ if (!spi_imx->bpw_rx) {
+ spi_imx_buf_rx_u32(spi_imx);
+ return;
+ }
+
+ if (spi_imx->bpw_w == 1)
+ spi_imx_buf_rx_u8(spi_imx);
+ else if (spi_imx->bpw_w == 2)
+ spi_imx_buf_rx_u16(spi_imx);
+}
+
+static void spi_imx_buf_tx_swap(struct spi_imx_data *spi_imx)
+{
+ u32 ctrl, val;
+
+ if (spi_imx->count == spi_imx->count_index) {
+ spi_imx->count_index = spi_imx->count > sizeof(u32) ?
+ spi_imx->count % sizeof(u32) : 0;
+ ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
+ ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
+ if (spi_imx->count >= sizeof(u32)) {
+ val = spi_imx->count - spi_imx->count_index;
+ } else {
+ val = spi_imx->bpw_w;
+ spi_imx->bpw_rx = 1;
+ }
+ ctrl |= ((val * 8 - 1) << MX51_ECSPI_CTRL_BL_OFFSET);
+ writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
+ }
+
+ if (spi_imx->count >= sizeof(u32)) {
+ spi_imx_buf_tx_u32(spi_imx);
+ return;
+ }
+
+ if (spi_imx->bpw_w == 1)
+ spi_imx_buf_tx_u8(spi_imx);
+ else if (spi_imx->bpw_w == 2)
+ spi_imx_buf_tx_u16(spi_imx);
+}
+
/* MX51 eCSPI */
static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx,
unsigned int fspi, unsigned int *fres)
@@ -370,7 +440,15 @@ static int mx51_ecspi_config(struct spi_device *spi,
/* set chip select to use */
ctrl |= MX51_ECSPI_CTRL_CS(spi->chip_select);

- ctrl |= (config->bpw - 1) << MX51_ECSPI_CTRL_BL_OFFSET;
+ if (spi_imx->dynamic_burst) {
+ if (config->len > MX51_ECSPI_CTRL_MAX_BURST)
+ ctrl |= MX51_ECSPI_CTRL_BL_MASK;
+ else
+ ctrl |= (((config->len - config->len % 4) * 8 - 1) <<
+ MX51_ECSPI_CTRL_BL_OFFSET);
+ } else {
+ ctrl |= (config->bpw - 1) << MX51_ECSPI_CTRL_BL_OFFSET;
+ }

cfg |= MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select);

@@ -805,6 +883,8 @@ static void spi_imx_push(struct spi_imx_data *spi_imx)
while (spi_imx->txfifo < spi_imx_get_fifosize(spi_imx)) {
if (!spi_imx->count)
break;
+ if (spi_imx->txfifo && (spi_imx->count == spi_imx->count_index))
+ break;
spi_imx->tx(spi_imx);
spi_imx->txfifo++;
}
@@ -895,8 +975,12 @@ static int spi_imx_setupxfer(struct spi_device *spi,
struct spi_imx_config config;
int ret;

+ spi_imx->dynamic_burst = 0;
+ spi_imx->bpw_rx = 0;
+
config.bpw = t ? t->bits_per_word : spi->bits_per_word;
config.speed_hz = t ? t->speed_hz : spi->max_speed_hz;
+ config.len = t->len;

if (!config.speed_hz)
config.speed_hz = spi->max_speed_hz;
@@ -905,14 +989,32 @@ static int spi_imx_setupxfer(struct spi_device *spi,

/* Initialize the functions for transfer */
if (config.bpw <= 8) {
- spi_imx->rx = spi_imx_buf_rx_u8;
- spi_imx->tx = spi_imx_buf_tx_u8;
+ if (t->len >= sizeof(u32) && is_imx51_ecspi(spi_imx)) {
+ spi_imx->dynamic_burst = 1;
+ spi_imx->rx = spi_imx_buf_rx_swap;
+ spi_imx->tx = spi_imx_buf_tx_swap;
+ } else {
+ spi_imx->rx = spi_imx_buf_rx_u8;
+ spi_imx->tx = spi_imx_buf_tx_u8;
+ }
} else if (config.bpw <= 16) {
- spi_imx->rx = spi_imx_buf_rx_u16;
- spi_imx->tx = spi_imx_buf_tx_u16;
+ if (t->len >= sizeof(u32) && is_imx51_ecspi(spi_imx)) {
+ spi_imx->dynamic_burst = 1;
+ spi_imx->rx = spi_imx_buf_rx_swap;
+ spi_imx->tx = spi_imx_buf_tx_swap;
+ } else {
+ spi_imx->rx = spi_imx_buf_rx_u16;
+ spi_imx->tx = spi_imx_buf_tx_u16;
+ }
} else {
- spi_imx->rx = spi_imx_buf_rx_u32;
- spi_imx->tx = spi_imx_buf_tx_u32;
+ if (is_imx51_ecspi(spi_imx)) {
+ spi_imx->dynamic_burst = 1;
+ spi_imx->rx = spi_imx_buf_rx_swap;
+ spi_imx->tx = spi_imx_buf_tx_swap;
+ } else {
+ spi_imx->rx = spi_imx_buf_rx_u32;
+ spi_imx->tx = spi_imx_buf_tx_u32;
+ }
}

if (spi_imx_can_dma(spi_imx->bitbang.master, spi, t))
@@ -920,6 +1022,8 @@ static int spi_imx_setupxfer(struct spi_device *spi,
else
spi_imx->usedma = 0;

+ spi_imx->bpw_w = DIV_ROUND_UP(config.bpw, 8);
+
if (spi_imx->usedma) {
ret = spi_imx_dma_configure(spi->master,
spi_imx_bytes_per_word(config.bpw));
@@ -1094,6 +1198,27 @@ static int spi_imx_pio_transfer(struct spi_device *spi,
spi_imx->count = transfer->len;
spi_imx->txfifo = 0;

+ if (spi_imx->dynamic_burst) {
+ if (spi_imx->count > MX51_ECSPI_CTRL_MAX_BURST)
+ spi_imx->count_index = spi_imx->count %
+ MX51_ECSPI_CTRL_MAX_BURST;
+ else
+ spi_imx->count_index = spi_imx->count % sizeof(u32);
+
+ switch (spi_imx->bpw_w) {
+ case 1:
+ spi_imx_u32_swap_u8(transfer,
+ (u32 *)transfer->tx_buf);
+ break;
+ case 2:
+ spi_imx_u32_swap_u16(transfer,
+ (u32 *)transfer->tx_buf);
+ break;
+ default:
+ break;
+ }
+ }
+
reinit_completion(&spi_imx->xfer_done);

spi_imx_push(spi_imx);
@@ -1110,6 +1235,22 @@ static int spi_imx_pio_transfer(struct spi_device *spi,
return -ETIMEDOUT;
}

+ if (spi_imx->dynamic_burst) {
+ switch (spi_imx->bpw_w) {
+ case 1:
+ spi_imx_u32_swap_u8(transfer,
+ (u32 *)transfer->rx_buf);
+ break;
+ case 2:
+ spi_imx_u32_swap_u16(transfer,
+ (u32 *)transfer->rx_buf);
+ break;
+ default:
+ break;
+ }
+ spi_imx->dynamic_burst = 0;
+ }
+
return transfer->len;
}

--
2.11.0
\
 
 \ /
  Last update: 2017-05-15 10:07    [W:0.132 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site