lkml.org 
[lkml]   [2017]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] xen/input: add multi-touch support
From
Date
gentle reminder


On 05/05/2017 07:45 AM, Oleksandr Andrushchenko wrote:
> Hi, Dmitry!
>
> On 04/21/2017 09:40 AM, Oleksandr Andrushchenko wrote:
>> Hi, Dmitry!
>>
>> On 04/21/2017 05:10 AM, Dmitry Torokhov wrote:
>>> Hi Oleksandr,
>>>
>>> On Thu, Apr 13, 2017 at 02:38:04PM +0300, Oleksandr Andrushchenko
>>> wrote:
>>>> From: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
>>>>
>>>> Extend xen_kbdfront to provide multi-touch support
>>>> to unprivileged domains.
>>>>
>>>> Signed-off-by: Oleksandr Andrushchenko
>>>> <oleksandr_andrushchenko@epam.com>
>>>> ---
>>>> drivers/input/misc/xen-kbdfront.c | 142
>>>> +++++++++++++++++++++++++++++++++++++-
>>>> 1 file changed, 140 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/input/misc/xen-kbdfront.c
>>>> b/drivers/input/misc/xen-kbdfront.c
>>>> index 01c27b4c3288..e5d064aaa237 100644
>>>> --- a/drivers/input/misc/xen-kbdfront.c
>>>> +++ b/drivers/input/misc/xen-kbdfront.c
>>>> @@ -17,6 +17,7 @@
>>>> #include <linux/errno.h>
>>>> #include <linux/module.h>
>>>> #include <linux/input.h>
>>>> +#include <linux/input/mt.h>
>>>> #include <linux/slab.h>
>>>> #include <asm/xen/hypervisor.h>
>>>> @@ -34,11 +35,14 @@
>>>> struct xenkbd_info {
>>>> struct input_dev *kbd;
>>>> struct input_dev *ptr;
>>>> + struct input_dev *mtouch;
>>>> struct xenkbd_page *page;
>>>> int gref;
>>>> int irq;
>>>> struct xenbus_device *xbdev;
>>>> char phys[32];
>>>> + /* current MT slot/contact ID we are injecting events in */
>>>> + int mtouch_cur_contact_id;
>>>> };
>>>> enum { KPARAM_X, KPARAM_Y, KPARAM_CNT };
>>>> @@ -47,6 +51,12 @@ module_param_array(ptr_size, int, NULL, 0444);
>>>> MODULE_PARM_DESC(ptr_size,
>>>> "Pointing device width, height in pixels (default 800,600)");
>>>> +enum { KPARAM_MT_X, KPARAM_MT_Y, KPARAM_MT_CNT };
>>>> +static int mtouch_size[KPARAM_MT_CNT] = { XENFB_WIDTH,
>>>> XENFB_HEIGHT };
>>>> +module_param_array(mtouch_size, int, NULL, 0444);
>>>> +MODULE_PARM_DESC(ptr_size,
>>>> + "Multi-touch device width, height in pixels (default 800,600)");
>>>> +
>>> Why do you need separate module parameters for multi-touch device?
>> please see below
>>>
>>>> static int xenkbd_remove(struct xenbus_device *);
>>>> static int xenkbd_connect_backend(struct xenbus_device *, struct
>>>> xenkbd_info *);
>>>> static void xenkbd_disconnect_backend(struct xenkbd_info *);
>>>> @@ -100,6 +110,60 @@ static irqreturn_t input_handler(int rq, void
>>>> *dev_id)
>>>> input_report_rel(dev, REL_WHEEL,
>>>> -event->pos.rel_z);
>>>> break;
>>>> + case XENKBD_TYPE_MTOUCH:
>>>> + dev = info->mtouch;
>>>> + if (unlikely(!dev))
>>>> + break;
>>>> + if (unlikely(event->mtouch.contact_id !=
>>>> + info->mtouch_cur_contact_id)) {
>>> Why is this unlikely? Does contact ID changes once in 1000 packets or
>>> even less?
>> Mu assumption was that regardless of the fact that we are multi-touch
>> device still single touches will come in more frequently
>> But I can remove *unlikely* if my assumption is not correct
>>>> + info->mtouch_cur_contact_id =
>>>> + event->mtouch.contact_id;
>>>> + input_mt_slot(dev, event->mtouch.contact_id);
>>>> + }
>>>> + switch (event->mtouch.event_type) {
>>>> + case XENKBD_MT_EV_DOWN:
>>>> + input_mt_report_slot_state(dev, MT_TOOL_FINGER,
>>>> + true);
>>>> + input_event(dev, EV_ABS, ABS_MT_POSITION_X,
>>>> + event->mtouch.u.pos.abs_x);
>>>> + input_event(dev, EV_ABS, ABS_MT_POSITION_Y,
>>>> + event->mtouch.u.pos.abs_y);
>>>> + input_event(dev, EV_ABS, ABS_X,
>>>> + event->mtouch.u.pos.abs_x);
>>>> + input_event(dev, EV_ABS, ABS_Y,
>>>> + event->mtouch.u.pos.abs_y);
>>>> + break;
>>>> + case XENKBD_MT_EV_UP:
>>>> + input_mt_report_slot_state(dev, MT_TOOL_FINGER,
>>>> + false);
>>>> + break;
>>>> + case XENKBD_MT_EV_MOTION:
>>>> + input_event(dev, EV_ABS, ABS_MT_POSITION_X,
>>>> + event->mtouch.u.pos.abs_x);
>>>> + input_event(dev, EV_ABS, ABS_MT_POSITION_Y,
>>>> + event->mtouch.u.pos.abs_y);
>>>> + input_event(dev, EV_ABS, ABS_X,
>>>> + event->mtouch.u.pos.abs_x);
>>>> + input_event(dev, EV_ABS, ABS_Y,
>>>> + event->mtouch.u.pos.abs_y);
>>>> + break;
>>>> + case XENKBD_MT_EV_SYN:
>>>> + input_mt_sync_frame(dev);
>>>> + break;
>>>> + case XENKBD_MT_EV_SHAPE:
>>>> + input_event(dev, EV_ABS, ABS_MT_TOUCH_MAJOR,
>>>> + event->mtouch.u.shape.major);
>>>> + input_event(dev, EV_ABS, ABS_MT_TOUCH_MINOR,
>>>> + event->mtouch.u.shape.minor);
>>>> + break;
>>>> + case XENKBD_MT_EV_ORIENT:
>>>> + input_event(dev, EV_ABS, ABS_MT_ORIENTATION,
>>>> + event->mtouch.u.orientation);
>>>> + break;
>>>> + }
>>>> + /* only report syn when requested */
>>>> + if (event->mtouch.event_type != XENKBD_MT_EV_SYN)
>>>> + dev = NULL;
>>>> }
>>>> if (dev)
>>>> input_sync(dev);
>>>> @@ -115,9 +179,9 @@ static int xenkbd_probe(struct xenbus_device *dev,
>>>> const struct xenbus_device_id *id)
>>>> {
>>>> int ret, i;
>>>> - unsigned int abs;
>>>> + unsigned int abs, touch;
>>>> struct xenkbd_info *info;
>>>> - struct input_dev *kbd, *ptr;
>>>> + struct input_dev *kbd, *ptr, *mtouch;
>>>> info = kzalloc(sizeof(*info), GFP_KERNEL);
>>>> if (!info) {
>>>> @@ -152,6 +216,17 @@ static int xenkbd_probe(struct xenbus_device
>>>> *dev,
>>>> }
>>>> }
>>>> + touch = xenbus_read_unsigned(dev->nodename,
>>>> + XENKBD_FIELD_FEAT_MTOUCH, 0);
>>>> + if (touch) {
>>>> + ret = xenbus_write(XBT_NIL, dev->nodename,
>>>> + XENKBD_FIELD_REQ_MTOUCH, "1");
>>>> + if (ret) {
>>>> + pr_warning("xenkbd: can't request multi-touch");
>>>> + touch = 0;
>>>> + }
>>>> + }
>>>> +
>>>> /* keyboard */
>>>> kbd = input_allocate_device();
>>>> if (!kbd)
>>>> @@ -208,6 +283,67 @@ static int xenkbd_probe(struct xenbus_device
>>>> *dev,
>>>> }
>>>> info->ptr = ptr;
>>>> + /* multi-touch device */
>>>> + if (touch) {
>>>> + int num_cont, width, height;
>>>> +
>>>> + mtouch = input_allocate_device();
>>>> + if (!mtouch)
>>>> + goto error_nomem;
>>>> +
>>>> + num_cont = xenbus_read_unsigned(info->xbdev->nodename,
>>>> + XENKBD_FIELD_MT_NUM_CONTACTS,
>>>> + 1);
>>>> + width = xenbus_read_unsigned(info->xbdev->nodename,
>>>> + XENKBD_FIELD_MT_WIDTH,
>>>> + XENFB_WIDTH);
>>>> + height = xenbus_read_unsigned(info->xbdev->nodename,
>>>> + XENKBD_FIELD_MT_HEIGHT,
>>>> + XENFB_HEIGHT);
>>> Curious why you need separate parameters here too...
>> This is because mt parameters are different from ptr
>> in a way that they are configurable per front driver's
>> instance rather than per backend, e.g. in XenStore:
>>
>> /local/domain/0/backend/vkbd/1/0/width = "1920"
>> /local/domain/0/backend/vkbd/1/0/height = "1080"
>>
>> /local/domain/1/device/vkbd/0/multi-touch-width = "1920"
>> /local/domain/1/device/vkbd/0/multi-touch-height = "1080"
>> /local/domain/1/device/vkbd/0/multi-touch-num-contacts = "10"
>>
>> /local/domain/1/device/vkbd/1/multi-touch-width = "800"
>> /local/domain/1/device/vkbd/1/multi-touch-height = "600"
>> /local/domain/1/device/vkbd/1/multi-touch-num-contacts = "3"
>>
>> The main reason for such configuration is that you can
>> configure multiple mt input devices even for the same guest
>> with different resolutions which may not match those
>> configured for ptr.
>> (In my use-case I use new displif protocol [1] in conjunction
>> with mt input devices and the corresponding backend is not
>> QEMU's xenfb)
>>
>> As to module parameters, I added those to be consistent with
>> ptr device. Do you think we can live without them and
>> do you want me to remove them?
>>>> +
>>>> + mtouch->name = "Xen Virtual Multi-touch";
>>>> + mtouch->phys = info->phys;
>>>> + mtouch->id.bustype = BUS_PCI;
>>>> + mtouch->id.vendor = 0x5853;
>>>> + mtouch->id.product = 0xfffd;
>>>> +
>>>> + __set_bit(EV_ABS, mtouch->evbit);
>>>> + __set_bit(EV_KEY, mtouch->evbit);
>>>> + __set_bit(BTN_TOUCH, mtouch->keybit);
>>>> +
>>>> + input_set_abs_params(mtouch, ABS_X,
>>>> + 0, width, 0, 0);
>>>> + input_set_abs_params(mtouch, ABS_Y,
>>>> + 0, height, 0, 0);
>>>> + input_set_abs_params(mtouch, ABS_PRESSURE,
>>>> + 0, 255, 0, 0);
>>>> +
>>>> + input_set_abs_params(mtouch, ABS_MT_TOUCH_MAJOR,
>>>> + 0, 255, 0, 0);
>>>> + input_set_abs_params(mtouch, ABS_MT_POSITION_X,
>>>> + 0, width, 0, 0);
>>>> + input_set_abs_params(mtouch, ABS_MT_POSITION_Y,
>>>> + 0, height, 0, 0);
>>>> + input_set_abs_params(mtouch, ABS_MT_PRESSURE,
>>>> + 0, 255, 0, 0);
>>>> +
>>>> + input_mt_init_slots(mtouch, num_cont, 0);
>>>> +
>>>> + mtouch_size[KPARAM_MT_X] = width;
>>>> + mtouch_size[KPARAM_MT_Y] = height;
>>>> + info->mtouch_cur_contact_id = -1;
>>>> +
>>>> + ret = input_register_device(mtouch);
>>>> + if (ret) {
>>>> + input_free_device(mtouch);
>>>> + xenbus_dev_fatal(info->xbdev, ret,
>>>> + "input_register_device(mtouch)");
>>>> + goto error;
>>>> + }
>>>> + info->mtouch_cur_contact_id = -1;
>>>> + info->mtouch = mtouch;
>>>> + }
>>>> +
>>>> ret = xenkbd_connect_backend(dev, info);
>>>> if (ret < 0)
>>>> goto error;
>>>> @@ -240,6 +376,8 @@ static int xenkbd_remove(struct xenbus_device
>>>> *dev)
>>>> input_unregister_device(info->kbd);
>>>> if (info->ptr)
>>>> input_unregister_device(info->ptr);
>>>> + if (info->mtouch)
>>>> + input_unregister_device(info->mtouch);
>>>> free_page((unsigned long)info->page);
>>>> kfree(info);
>>>> return 0;
>>>> --
>>>> 2.7.4
>>>>
>>> Thanks.
>> Thank you,
>> Oleksandr
>> [1]
>> https://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git/commit/?h=for-linus-4.12&id=e27c533dc4d0338266ccb6dab428150d4d629e6a
>>
>
> As all the dependencies are now merged into the kernel and *if*
> the above sounds reasonable for you can we please proceed with this
> patch?
>
> Thank you,
> Oleksandr

\
 
 \ /
  Last update: 2017-05-12 15:45    [W:0.102 / U:0.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site