lkml.org 
[lkml]   [2017]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 11/17] net: qualcomm: make qca_7k_common a separate kernel module
Date
In order to share common functions between QCA7000 SPI and UART protocol
driver the qca_7k_common needs to be a separate kernel module.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
drivers/net/ethernet/qualcomm/Kconfig | 8 +++++++-
drivers/net/ethernet/qualcomm/Makefile | 5 +++--
drivers/net/ethernet/qualcomm/qca_7k_common.c | 10 ++++++++++
3 files changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/Kconfig b/drivers/net/ethernet/qualcomm/Kconfig
index d7720bf..b4c369d 100644
--- a/drivers/net/ethernet/qualcomm/Kconfig
+++ b/drivers/net/ethernet/qualcomm/Kconfig
@@ -16,7 +16,13 @@ config NET_VENDOR_QUALCOMM
if NET_VENDOR_QUALCOMM

config QCA7000
- tristate "Qualcomm Atheros QCA7000 support"
+ tristate
+ help
+ This enables support for the Qualcomm Atheros QCA7000.
+
+config QCA7000_SPI
+ tristate "Qualcomm Atheros QCA7000 SPI support"
+ select QCA7000
depends on SPI_MASTER && OF
---help---
This SPI protocol driver supports the Qualcomm Atheros QCA7000.
diff --git a/drivers/net/ethernet/qualcomm/Makefile b/drivers/net/ethernet/qualcomm/Makefile
index 5e17bf1..65556ca 100644
--- a/drivers/net/ethernet/qualcomm/Makefile
+++ b/drivers/net/ethernet/qualcomm/Makefile
@@ -2,7 +2,8 @@
# Makefile for the Qualcomm network device drivers.
#

-obj-$(CONFIG_QCA7000) += qcaspi.o
-qcaspi-objs := qca_spi.o qca_7k_common.o qca_7k.o qca_debug.o
+obj-$(CONFIG_QCA7000) += qca_7k_common.o
+obj-$(CONFIG_QCA7000_SPI) += qcaspi.o
+qcaspi-objs := qca_7k.o qca_debug.o qca_spi.o

obj-y += emac/
diff --git a/drivers/net/ethernet/qualcomm/qca_7k_common.c b/drivers/net/ethernet/qualcomm/qca_7k_common.c
index 0d3daa9..6b511f0 100644
--- a/drivers/net/ethernet/qualcomm/qca_7k_common.c
+++ b/drivers/net/ethernet/qualcomm/qca_7k_common.c
@@ -21,7 +21,9 @@
* by an atheros frame while transmitted over a serial channel;
*/

+#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/module.h>

#include "qca_7k_common.h"

@@ -46,6 +48,7 @@ qcafrm_create_header(u8 *buf, u16 length)

return QCAFRM_HEADER_LEN;
}
+EXPORT_SYMBOL_GPL(qcafrm_create_header);

u16
qcafrm_create_footer(u8 *buf)
@@ -57,6 +60,7 @@ qcafrm_create_footer(u8 *buf)
buf[1] = 0x55;
return QCAFRM_FOOTER_LEN;
}
+EXPORT_SYMBOL_GPL(qcafrm_create_footer);

/* Gather received bytes and try to extract a full ethernet frame by
* following a simple state machine.
@@ -154,3 +158,9 @@ qcafrm_fsm_decode(struct qcafrm_handle *handle, u8 *buf, u16 buf_len, u8 recv_by

return ret;
}
+EXPORT_SYMBOL_GPL(qcafrm_fsm_decode);
+
+MODULE_DESCRIPTION("Qualcomm Atheros QCA7000 common");
+MODULE_AUTHOR("Qualcomm Atheros Communications");
+MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>");
+MODULE_LICENSE("Dual BSD/GPL");
--
2.1.4
\
 
 \ /
  Last update: 2017-05-10 21:21    [W:0.112 / U:2.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site