lkml.org 
[lkml]   [2017]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 06/17] net: qca_spi: remove QCASPI_MTU
Date
There is no need for an additional MTU define.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
drivers/net/ethernet/qualcomm/qca_spi.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index a0dbb92..a239ac4 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -69,7 +69,6 @@ static int qcaspi_pluggable = QCASPI_PLUGGABLE_MIN;
module_param(qcaspi_pluggable, int, 0);
MODULE_PARM_DESC(qcaspi_pluggable, "Pluggable SPI connection (yes/no).");

-#define QCASPI_MTU QCAFRM_MAX_MTU
#define QCASPI_TX_TIMEOUT (1 * HZ)
#define QCASPI_QCA7K_REBOOT_TIME_MS 1000

@@ -745,7 +744,7 @@ qcaspi_netdev_init(struct net_device *dev)
{
struct qcaspi *qca = netdev_priv(dev);

- dev->mtu = QCASPI_MTU;
+ dev->mtu = QCAFRM_MAX_MTU;
dev->type = ARPHRD_ETHER;
qca->clkspeed = qcaspi_clkspeed;
qca->burst_len = qcaspi_burst_len;
--
2.1.4
\
 
 \ /
  Last update: 2017-05-10 21:21    [W:0.115 / U:12.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site