lkml.org 
[lkml]   [2017]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] regulator: Allow for asymmetric settling times
Date
Some regulators have different settling times for voltage increases and
decreases. To avoid a time penalty on the faster transition allow for
different settings for up- and downward transitions.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---
Changes in v2:
- Don't remove settling_time property
- Split DT bindings doc into separate patch

drivers/regulator/core.c | 6 ++++++
drivers/regulator/of_regulator.c | 9 +++++++++
include/linux/regulator/machine.h | 6 ++++++
3 files changed, 21 insertions(+)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 811096b23143..7836f07431d8 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2775,6 +2775,12 @@ static int _regulator_set_voltage_time(struct regulator_dev *rdev,
ramp_delay = rdev->desc->ramp_delay;
else if (rdev->constraints->settling_time)
return rdev->constraints->settling_time;
+ else if (rdev->constraints->settling_time_up &&
+ (new_uV > old_uV))
+ return rdev->constraints->settling_time_up;
+ else if (rdev->constraints->settling_time_down &&
+ (new_uV < old_uV))
+ return rdev->constraints->settling_time_down;

if (ramp_delay == 0) {
rdev_dbg(rdev, "ramp_delay not set\n");
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 09d677d5d3f0..b0a007c349ef 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -90,6 +90,15 @@ static void of_get_regulation_constraints(struct device_node *np,
if (!ret)
constraints->settling_time = pval;

+ ret = of_property_read_u32(np, "regulator-settling-time-up-us", &pval);
+ if (!ret)
+ constraints->settling_time_up = pval;
+
+ ret = of_property_read_u32(np, "regulator-settling-time-down-us",
+ &pval);
+ if (!ret)
+ constraints->settling_time_down = pval;
+
ret = of_property_read_u32(np, "regulator-enable-ramp-delay", &pval);
if (!ret)
constraints->enable_time = pval;
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index 117699d1f7df..9cd4fef37203 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -110,6 +110,10 @@ struct regulator_state {
* @ramp_delay: Time to settle down after voltage change (unit: uV/us)
* @settling_time: Time to settle down after voltage change when voltage
* change is non-linear (unit: microseconds).
+ * @settling_time_up: Time to settle down after voltage increase when voltage
+ * change is non-linear (unit: microseconds).
+ * @settling_time_down : Time to settle down after voltage decrease when
+ * voltage change is non-linear (unit: microseconds).
* @active_discharge: Enable/disable active discharge. The enum
* regulator_active_discharge values are used for
* initialisation.
@@ -152,6 +156,8 @@ struct regulation_constraints {

unsigned int ramp_delay;
unsigned int settling_time;
+ unsigned int settling_time_up;
+ unsigned int settling_time_down;
unsigned int enable_time;

unsigned int active_discharge;
--
2.13.0.rc0.306.g87b477812d-goog
\
 
 \ /
  Last update: 2017-05-01 20:39    [W:0.242 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site