lkml.org 
[lkml]   [2017]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/4] pinctrl: aspeed: Document pinconf in devicetree bindings
Date
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 40 +++++++++++++++++-----
1 file changed, 31 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index b98e6f030da8..ca01710ee29a 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -34,13 +34,28 @@ Documentation/devicetree/bindings/mfd/syscon.txt
Subnode Format
==============

-The required properties of child nodes are (as defined in pinctrl-bindings):
-- function
-- groups
+The required properties of pinmux child nodes are:
+- function: the mux function to select
+- groups : the list of groups to select with this function

-Each function has only one associated pin group. Each group is named by its
-function. The following values for the function and groups properties are
-supported:
+Required properties of pinconf child nodes are:
+- groups: A list of groups to select (either this or "pins" must be
+ specified)
+- pins : A list of ball names as strings, eg "D14" (either this or "groups"
+ must be specified)
+
+Optional properties of pinconf child nodes are:
+- bias-disable : disable any pin bias
+- bias-pull-down: pull down the pin
+- drive-strength: sink or source at most X mA
+
+Definitions are as specified in
+Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt, with any
+further limitations as described above.
+
+For pinmux, each mux function has only one associated pin group. Each group is
+named by its function. The following values for the function and groups
+properties are supported:

aspeed,ast2400-pinctrl, aspeed,g4-pinctrl:

@@ -90,6 +105,11 @@ syscon: scu@1e6e2000 {
function = "I2C3";
groups = "I2C3";
};
+
+ pinctrl_gpioh0_unbiased_default: gpioh0 {
+ pins = "A8";
+ bias-disable;
+ };
};
};

@@ -110,6 +130,11 @@ ahb {
function = "I2C3";
groups = "I2C3";
};
+
+ pinctrl_gpioh0_unbiased_default: gpioh0 {
+ pins = "A18";
+ bias-disable;
+ };
};
};

@@ -143,6 +168,3 @@ ahb {
};
};
};
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices.
--
2.9.3
\
 
 \ /
  Last update: 2017-04-07 14:58    [W:0.080 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site