lkml.org 
[lkml]   [2017]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/3] phy: rockchip-usb: Add vbus regulator support.
From
Date


On Wednesday 05 April 2017 07:36 PM, Sjoerd Simons wrote:
> On rockchip devices vbus is supplied by a separate power supply, often
> through a regulator. Add support for describing the the regulator in
> device-tree following the same convention as several other usb phy's.
>
merged, thanks.

-Kishon
> Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
> ---
>
> .../devicetree/bindings/phy/rockchip-usb-phy.txt | 1 +
> drivers/phy/phy-rockchip-usb.c | 19 +++++++++++++++++++
> 2 files changed, 20 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
> index 57dc388e2fa2..4ed569046daf 100644
> --- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
> @@ -30,6 +30,7 @@ Optional Properties:
> - reset-names: Only allow the following entries:
> - phy-reset
> - resets: Must contain an entry for each entry in reset-names.
> +- vbus-supply: power-supply phandle for vbus power source
>
> Example:
>
> diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c
> index 734987fa0ad7..3378eeb7a562 100644
> --- a/drivers/phy/phy-rockchip-usb.c
> +++ b/drivers/phy/phy-rockchip-usb.c
> @@ -66,6 +66,7 @@ struct rockchip_usb_phy {
> struct phy *phy;
> bool uart_enabled;
> struct reset_control *reset;
> + struct regulator *vbus;
> };
>
> static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
> @@ -88,6 +89,9 @@ static void rockchip_usb_phy480m_disable(struct clk_hw *hw)
> struct rockchip_usb_phy,
> clk480m_hw);
>
> + if (phy->vbus)
> + regulator_disable(phy->vbus);
> +
> /* Power down usb phy analog blocks by set siddq 1 */
> rockchip_usb_phy_power(phy, 1);
> }
> @@ -143,6 +147,14 @@ static int rockchip_usb_phy_power_on(struct phy *_phy)
> if (phy->uart_enabled)
> return -EBUSY;
>
> + if (phy->vbus) {
> + int ret;
> +
> + ret = regulator_enable(phy->vbus);
> + if (ret)
> + return ret;
> + }
> +
> return clk_prepare_enable(phy->clk480m);
> }
>
> @@ -268,6 +280,13 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
> }
> phy_set_drvdata(rk_phy->phy, rk_phy);
>
> + rk_phy->vbus = devm_regulator_get_optional(&rk_phy->phy->dev, "vbus");
> + if (IS_ERR(rk_phy->vbus)) {
> + if (PTR_ERR(rk_phy->vbus) == -EPROBE_DEFER)
> + return PTR_ERR(rk_phy->vbus);
> + rk_phy->vbus = NULL;
> + }
> +
> /*
> * When acting as uart-pipe, just keep clock on otherwise
> * only power up usb phy when it use, so disable it when init
>

\
 
 \ /
  Last update: 2017-04-06 12:39    [W:0.062 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site