lkml.org 
[lkml]   [2017]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 44/72] parisc: Clean up fixup routines for get_user()/put_user()
Date
4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Helge Deller <deller@gmx.de>

commit d19f5e41b344a057bb2450024a807476f30978d2 upstream.

Al Viro noticed that userspace accesses via get_user()/put_user() can be
simplified a lot with regard to usage of the exception handling.

This patch implements a fixup routine for get_user() and put_user() in such
that the exception handler will automatically load -EFAULT into the register
%r8 (the error value) in case on a fault on userspace. Additionally the fixup
routine will zero the target register on fault in case of a get_user() call.
The target register is extracted out of the faulting assembly instruction.

This patch brings a few benefits over the old implementation:
1. Exception handling gets much cleaner, easier and smaller in size.
2. Helper functions like fixup_get_user_skip_1 (all of fixup.S) can be dropped.
3. No need to hardcode %r9 as target register for get_user() any longer. This
helps the compiler register allocator and thus creates less assembler
statements.
4. No dependency on the exception_data contents any longer.
5. Nested faults will be handled cleanly.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/parisc/include/asm/uaccess.h | 59 +++++++++++++---------
arch/parisc/kernel/parisc_ksyms.c | 10 ---
arch/parisc/lib/Makefile | 2
arch/parisc/lib/fixup.S | 98 --------------------------------------
arch/parisc/mm/fault.c | 17 ++++++
5 files changed, 52 insertions(+), 134 deletions(-)

--- a/arch/parisc/include/asm/uaccess.h
+++ b/arch/parisc/include/asm/uaccess.h
@@ -68,6 +68,15 @@ struct exception_table_entry {
".previous\n"

/*
+ * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() creates a special exception table entry
+ * (with lowest bit set) for which the fault handler in fixup_exception() will
+ * load -EFAULT into %r8 for a read or write fault, and zeroes the target
+ * register in case of a read fault in get_user().
+ */
+#define ASM_EXCEPTIONTABLE_ENTRY_EFAULT( fault_addr, except_addr )\
+ ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr + 1)
+
+/*
* The page fault handler stores, in a per-cpu area, the following information
* if a fixup routine is available.
*/
@@ -94,7 +103,7 @@ struct exception_data {
#define __get_user(x, ptr) \
({ \
register long __gu_err __asm__ ("r8") = 0; \
- register long __gu_val __asm__ ("r9") = 0; \
+ register long __gu_val; \
\
load_sr2(); \
switch (sizeof(*(ptr))) { \
@@ -110,22 +119,23 @@ struct exception_data {
})

#define __get_user_asm(ldx, ptr) \
- __asm__("\n1:\t" ldx "\t0(%%sr2,%2),%0\n\t" \
- ASM_EXCEPTIONTABLE_ENTRY(1b, fixup_get_user_skip_1)\
+ __asm__("1: " ldx " 0(%%sr2,%2),%0\n" \
+ "9:\n" \
+ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \
: "=r"(__gu_val), "=r"(__gu_err) \
- : "r"(ptr), "1"(__gu_err) \
- : "r1");
+ : "r"(ptr), "1"(__gu_err));

#if !defined(CONFIG_64BIT)

#define __get_user_asm64(ptr) \
- __asm__("\n1:\tldw 0(%%sr2,%2),%0" \
- "\n2:\tldw 4(%%sr2,%2),%R0\n\t" \
- ASM_EXCEPTIONTABLE_ENTRY(1b, fixup_get_user_skip_2)\
- ASM_EXCEPTIONTABLE_ENTRY(2b, fixup_get_user_skip_1)\
+ __asm__(" copy %%r0,%R0\n" \
+ "1: ldw 0(%%sr2,%2),%0\n" \
+ "2: ldw 4(%%sr2,%2),%R0\n" \
+ "9:\n" \
+ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \
+ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b) \
: "=r"(__gu_val), "=r"(__gu_err) \
- : "r"(ptr), "1"(__gu_err) \
- : "r1");
+ : "r"(ptr), "1"(__gu_err));

#endif /* !defined(CONFIG_64BIT) */

@@ -151,32 +161,31 @@ struct exception_data {
* The "__put_user/kernel_asm()" macros tell gcc they read from memory
* instead of writing. This is because they do not write to any memory
* gcc knows about, so there are no aliasing issues. These macros must
- * also be aware that "fixup_put_user_skip_[12]" are executed in the
- * context of the fault, and any registers used there must be listed
- * as clobbers. In this case only "r1" is used by the current routines.
- * r8/r9 are already listed as err/val.
+ * also be aware that fixups are executed in the context of the fault,
+ * and any registers used there must be listed as clobbers.
+ * r8 is already listed as err.
*/

#define __put_user_asm(stx, x, ptr) \
__asm__ __volatile__ ( \
- "\n1:\t" stx "\t%2,0(%%sr2,%1)\n\t" \
- ASM_EXCEPTIONTABLE_ENTRY(1b, fixup_put_user_skip_1)\
+ "1: " stx " %2,0(%%sr2,%1)\n" \
+ "9:\n" \
+ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \
: "=r"(__pu_err) \
- : "r"(ptr), "r"(x), "0"(__pu_err) \
- : "r1")
+ : "r"(ptr), "r"(x), "0"(__pu_err))


#if !defined(CONFIG_64BIT)

#define __put_user_asm64(__val, ptr) do { \
__asm__ __volatile__ ( \
- "\n1:\tstw %2,0(%%sr2,%1)" \
- "\n2:\tstw %R2,4(%%sr2,%1)\n\t" \
- ASM_EXCEPTIONTABLE_ENTRY(1b, fixup_put_user_skip_2)\
- ASM_EXCEPTIONTABLE_ENTRY(2b, fixup_put_user_skip_1)\
+ "1: stw %2,0(%%sr2,%1)\n" \
+ "2: stw %R2,4(%%sr2,%1)\n" \
+ "9:\n" \
+ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \
+ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b) \
: "=r"(__pu_err) \
- : "r"(ptr), "r"(__val), "0"(__pu_err) \
- : "r1"); \
+ : "r"(ptr), "r"(__val), "0"(__pu_err)); \
} while (0)

#endif /* !defined(CONFIG_64BIT) */
--- a/arch/parisc/kernel/parisc_ksyms.c
+++ b/arch/parisc/kernel/parisc_ksyms.c
@@ -47,16 +47,6 @@ EXPORT_SYMBOL(__cmpxchg_u64);
EXPORT_SYMBOL(lclear_user);
EXPORT_SYMBOL(lstrnlen_user);

-/* Global fixups - defined as int to avoid creation of function pointers */
-extern int fixup_get_user_skip_1;
-extern int fixup_get_user_skip_2;
-extern int fixup_put_user_skip_1;
-extern int fixup_put_user_skip_2;
-EXPORT_SYMBOL(fixup_get_user_skip_1);
-EXPORT_SYMBOL(fixup_get_user_skip_2);
-EXPORT_SYMBOL(fixup_put_user_skip_1);
-EXPORT_SYMBOL(fixup_put_user_skip_2);
-
#ifndef CONFIG_64BIT
/* Needed so insmod can set dp value */
extern int $global$;
--- a/arch/parisc/lib/Makefile
+++ b/arch/parisc/lib/Makefile
@@ -2,7 +2,7 @@
# Makefile for parisc-specific library files
#

-lib-y := lusercopy.o bitops.o checksum.o io.o memset.o fixup.o memcpy.o \
+lib-y := lusercopy.o bitops.o checksum.o io.o memset.o memcpy.o \
ucmpdi2.o delay.o

obj-y := iomap.o
--- a/arch/parisc/lib/fixup.S
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Linux/PA-RISC Project (http://www.parisc-linux.org/)
- *
- * Copyright (C) 2004 Randolph Chung <tausq@debian.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Fixup routines for kernel exception handling.
- */
-#include <asm/asm-offsets.h>
-#include <asm/assembly.h>
-#include <asm/errno.h>
-#include <linux/linkage.h>
-
-#ifdef CONFIG_SMP
- .macro get_fault_ip t1 t2
- loadgp
- addil LT%__per_cpu_offset,%r27
- LDREG RT%__per_cpu_offset(%r1),\t1
- /* t2 = smp_processor_id() */
- mfctl 30,\t2
- ldw TI_CPU(\t2),\t2
-#ifdef CONFIG_64BIT
- extrd,u \t2,63,32,\t2
-#endif
- /* t2 = &__per_cpu_offset[smp_processor_id()]; */
- LDREGX \t2(\t1),\t2
- addil LT%exception_data,%r27
- LDREG RT%exception_data(%r1),\t1
- /* t1 = this_cpu_ptr(&exception_data) */
- add,l \t1,\t2,\t1
- /* %r27 = t1->fault_gp - restore gp */
- LDREG EXCDATA_GP(\t1), %r27
- /* t1 = t1->fault_ip */
- LDREG EXCDATA_IP(\t1), \t1
- .endm
-#else
- .macro get_fault_ip t1 t2
- loadgp
- /* t1 = this_cpu_ptr(&exception_data) */
- addil LT%exception_data,%r27
- LDREG RT%exception_data(%r1),\t2
- /* %r27 = t2->fault_gp - restore gp */
- LDREG EXCDATA_GP(\t2), %r27
- /* t1 = t2->fault_ip */
- LDREG EXCDATA_IP(\t2), \t1
- .endm
-#endif
-
- .level LEVEL
-
- .text
- .section .fixup, "ax"
-
- /* get_user() fixups, store -EFAULT in r8, and 0 in r9 */
-ENTRY_CFI(fixup_get_user_skip_1)
- get_fault_ip %r1,%r8
- ldo 4(%r1), %r1
- ldi -EFAULT, %r8
- bv %r0(%r1)
- copy %r0, %r9
-ENDPROC_CFI(fixup_get_user_skip_1)
-
-ENTRY_CFI(fixup_get_user_skip_2)
- get_fault_ip %r1,%r8
- ldo 8(%r1), %r1
- ldi -EFAULT, %r8
- bv %r0(%r1)
- copy %r0, %r9
-ENDPROC_CFI(fixup_get_user_skip_2)
-
- /* put_user() fixups, store -EFAULT in r8 */
-ENTRY_CFI(fixup_put_user_skip_1)
- get_fault_ip %r1,%r8
- ldo 4(%r1), %r1
- bv %r0(%r1)
- ldi -EFAULT, %r8
-ENDPROC_CFI(fixup_put_user_skip_1)
-
-ENTRY_CFI(fixup_put_user_skip_2)
- get_fault_ip %r1,%r8
- ldo 8(%r1), %r1
- bv %r0(%r1)
- ldi -EFAULT, %r8
-ENDPROC_CFI(fixup_put_user_skip_2)
-
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -149,6 +149,23 @@ int fixup_exception(struct pt_regs *regs
d->fault_space = regs->isr;
d->fault_addr = regs->ior;

+ /*
+ * Fix up get_user() and put_user().
+ * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() sets the least-significant
+ * bit in the relative address of the fixup routine to indicate
+ * that %r8 should be loaded with -EFAULT to report a userspace
+ * access error.
+ */
+ if (fix->fixup & 1) {
+ regs->gr[8] = -EFAULT;
+
+ /* zero target register for get_user() */
+ if (parisc_acctyp(0, regs->iir) == VM_READ) {
+ int treg = regs->iir & 0x1f;
+ regs->gr[treg] = 0;
+ }
+ }
+
regs->iaoq[0] = (unsigned long)&fix->fixup + fix->fixup;
regs->iaoq[0] &= ~3;
/*

\
 
 \ /
  Last update: 2017-04-06 11:20    [W:0.256 / U:1.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site