lkml.org 
[lkml]   [2017]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] backlight: pwm_bl: Fix GPIO out for unimplemented .get_direction()
Date
Commit 7613c922315e308a ("backlight: pwm_bl: Move the checks for initial
power state to a separate function") not just moved some code, but made
slight changes in semantics.

If a gpiochip doesn't implement the optional .get_direction() callback,
gpiod_get_direction always returns -EINVAL, which is never equal to
GPIOF_DIR_IN, leading to the GPIO not being configured for output.

To avoid this, invert the test and check for not GPIOF_DIR_OUT instead,
like the original code did.

This restores the display on r8a7740/armadillo.

Fixes: 7613c922315e308a ("backlight: pwm_bl: Move the checks for initial power state to a separate function")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
---
This fixes a regression introduced in v4.11-rc1.

v2:
- Add Reviewed-by, Acked-by.

drivers/video/backlight/pwm_bl.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index d7efcb632f7d9dde..002f1ce22bd02032 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -297,14 +297,15 @@ static int pwm_backlight_probe(struct platform_device *pdev)
}

/*
- * If the GPIO is configured as input, change the direction to output
- * and set the GPIO as active.
+ * If the GPIO is not known to be already configured as output, that
+ * is, if gpiod_get_direction returns either GPIOF_DIR_IN or -EINVAL,
+ * change the direction to output and set the GPIO as active.
* Do not force the GPIO to active when it was already output as it
* could cause backlight flickering or we would enable the backlight too
* early. Leave the decision of the initial backlight state for later.
*/
if (pb->enable_gpio &&
- gpiod_get_direction(pb->enable_gpio) == GPIOF_DIR_IN)
+ gpiod_get_direction(pb->enable_gpio) != GPIOF_DIR_OUT)
gpiod_direction_output(pb->enable_gpio, 1);

pb->power_supply = devm_regulator_get(&pdev->dev, "power");
--
2.7.4
\
 
 \ /
  Last update: 2017-04-04 12:58    [W:0.024 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site