lkml.org 
[lkml]   [2017]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 4/4] iio: accel: adxl345: Add support for triggered buffer
From
Date
On 29/04/17 08:49, Eva Rachel Retuya wrote:
> Previously, the only way to capture data is to read the exposed sysfs
> files in_accel_[x/y/z]_raw and applying the scale from in_accel_scale.
> Provide a way for continuous data capture that allows multiple data
> channels to be read at once by setting up buffer support.
>
> Initialize scan_type fields that describe the buffer and make sure to
> claim and release direct mode in read_raw. The latter is done to ensure
> no raw reads are attempted when utilizing the buffer and vice versa.
>
> Lastly, add triggered buffer support that allows utilization of any
> given trigger such as DATA_READY, hrtimer, etc. to initiate capturing of
> data and placing said data in the buffer. The trigger handler performs
> an all-axes read with timestamp.
>
> Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Few minor bits inline... I'm a little bit in two minds about the
holding up waiting for new data when using another trigger...

Jonathan
> ---
> Changes in v2:
> * Provide a more detailed commit message
> * adxl345_trigger_handler()
> * if using external trigger, place a adxl345_data_ready() call before
> performing a bulk read
> * Since get_triple() is scrapped, place a direct bulk read here
> * Move mutex unlocking below goto label
> * Switch to devm_iio_triggered_buffer_setup()
> * Remove i2c_check_functionality() that could introduce regression
>
> drivers/iio/accel/Kconfig | 2 +
> drivers/iio/accel/adxl345_core.c | 101 ++++++++++++++++++++++++++++++++++++++-
> 2 files changed, 102 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index 15de262..45092da 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -7,6 +7,8 @@ menu "Accelerometers"
>
> config ADXL345
> tristate
> + select IIO_BUFFER
> + select IIO_TRIGGERED_BUFFER
>
> config ADXL345_I2C
> tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer I2C Driver"
> diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
> index b8be0d7..40dbdce 100644
> --- a/drivers/iio/accel/adxl345_core.c
> +++ b/drivers/iio/accel/adxl345_core.c
> @@ -14,8 +14,11 @@
> #include <linux/of_irq.h>
> #include <linux/regmap.h>
>
> +#include <linux/iio/buffer.h>
> #include <linux/iio/iio.h>
> #include <linux/iio/trigger.h>
> +#include <linux/iio/triggered_buffer.h>
> +#include <linux/iio/trigger_consumer.h>
>
> #include "adxl345.h"
>
> @@ -55,12 +58,20 @@
> */
> static const int adxl345_uscale = 38300;
>
> +enum adxl345_scan_index {
> + ADXL345_IDX_X,
> + ADXL345_IDX_Y,
> + ADXL345_IDX_Z,
> + ADXL345_IDX_TSTAMP,
> +};
> +
> struct adxl345_data {
> struct iio_trigger *data_ready_trig;
> bool data_ready_trig_on;
> struct regmap *regmap;
> struct mutex lock; /* protect this data structure */
> u8 data_range;
> + s16 buffer[8]; /* 3 x 16-bit channels + padding + 64-bit timestamp */
> };
>
> static int adxl345_set_mode(struct adxl345_data *data, u8 mode)
> @@ -109,12 +120,25 @@ static int adxl345_data_ready(struct adxl345_data *data)
> .address = reg, \
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> + .scan_index = ADXL345_IDX_##axis, \
> + .scan_type = { \
> + .sign = 's', \
> + .realbits = 13, \
> + .storagebits = 16, \
> + .endianness = IIO_LE, \
> + }, \
> }
>
> static const struct iio_chan_spec adxl345_channels[] = {
> ADXL345_CHANNEL(ADXL345_REG_DATAX0, X),
> ADXL345_CHANNEL(ADXL345_REG_DATAY0, Y),
> ADXL345_CHANNEL(ADXL345_REG_DATAZ0, Z),
> + IIO_CHAN_SOFT_TIMESTAMP(ADXL345_IDX_TSTAMP),
> +};
> +
> +static const unsigned long adxl345_scan_masks[] = {
> + BIT(ADXL345_IDX_X) | BIT(ADXL345_IDX_Y) | BIT(ADXL345_IDX_Z),
> + 0
> };
>
> static int adxl345_read_raw(struct iio_dev *indio_dev,
> @@ -127,6 +151,10 @@ static int adxl345_read_raw(struct iio_dev *indio_dev,
>
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> + ret = iio_device_claim_direct_mode(indio_dev);
> + if (ret)
> + return ret;
> +
> mutex_lock(&data->lock);
> ret = adxl345_set_mode(data, ADXL345_POWER_CTL_MEASURE);
> if (ret < 0) {
> @@ -148,12 +176,14 @@ static int adxl345_read_raw(struct iio_dev *indio_dev,
> ret = regmap_bulk_read(data->regmap, chan->address, &regval,
> sizeof(regval));
> mutex_unlock(&data->lock);
> + iio_device_release_direct_mode(indio_dev);
> if (ret < 0) {
> adxl345_set_mode(data, ADXL345_POWER_CTL_STANDBY);
> return ret;
> }
>
> - *val = sign_extend32(le16_to_cpu(regval), 12);
> + *val = sign_extend32(le16_to_cpu(regval),
> + chan->scan_type.realbits - 1)
This change isn't really needed, but I suppose it does little harm...

> adxl345_set_mode(data, ADXL345_POWER_CTL_STANDBY);
>
> return IIO_VAL_INT;
> @@ -186,6 +216,64 @@ static irqreturn_t adxl345_irq(int irq, void *p)
> return IRQ_NONE;
> }
>
> +static irqreturn_t adxl345_trigger_handler(int irq, void *p)
> +{
> + struct iio_poll_func *pf = p;
> + struct iio_dev *indio_dev = pf->indio_dev;
> + struct adxl345_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + mutex_lock(&data->lock);
> + /* Make sure data is ready when using external trigger */
I 'think' this is only really relevant for the very first one.
After that general rule of thumb is that if an external trigger
is too quick - bad luck you'll get repeated data.

One of the reasons we would want to use another trigger is to
support capture in parallel from several sensors - if we 'hold'
like this we'll get out of sync.

As such I wonder if a better strategy would be to 'hold' for the
first reading in the buffer enable - thus guaranteeing valid
data before we start. After that we wouldn't need to check this
here.

What do others think?

> + if (!data->data_ready_trig_on) {
> + ret = adxl345_data_ready(data);
> + if (ret < 0)
> + goto error;
> + }
> +
> + ret = regmap_bulk_read(data->regmap, ADXL345_REG_DATAX0, data->buffer,
> + sizeof(__le16) * 3);
> + if (ret < 0)
> + goto error;
> +
> + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
> + pf->timestamp);
> +error:
> + mutex_unlock(&data->lock);
> + iio_trigger_notify_done(indio_dev->trig);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int adxl345_triggered_buffer_postenable(struct iio_dev *indio_dev)
> +{
> + struct adxl345_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + ret = iio_triggered_buffer_postenable(indio_dev);
> + if (ret)
> + return ret;
> +
> + return adxl345_set_mode(data, ADXL345_POWER_CTL_MEASURE);
> +}
> +
> +static int adxl345_triggered_buffer_predisable(struct iio_dev *indio_dev)
> +{
> + struct adxl345_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + ret = adxl345_set_mode(data, ADXL345_POWER_CTL_STANDBY);
> + if (ret)
> + return ret;
> +
> + return iio_triggered_buffer_predisable(indio_dev);
> +}
> +
> +static const struct iio_buffer_setup_ops adxl345_buffer_setup_ops = {
> + .postenable = adxl345_triggered_buffer_postenable,
> + .predisable = adxl345_triggered_buffer_predisable,
> +};
> +
> static int adxl345_drdy_trigger_set_state(struct iio_trigger *trig, bool state)
> {
> struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
> @@ -278,6 +366,7 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap, int irq,
> indio_dev->modes = INDIO_DIRECT_MODE;
> indio_dev->channels = adxl345_channels;
> indio_dev->num_channels = ARRAY_SIZE(adxl345_channels);
> + indio_dev->available_scan_masks = adxl345_scan_masks;
>
> if (irq > 0) {
> ret = devm_request_threaded_irq(dev,
> @@ -311,6 +400,16 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap, int irq,
> }
> }
>
> + ret = devm_iio_triggered_buffer_setup(dev,
> + indio_dev,
> + iio_pollfunc_store_time,
> + adxl345_trigger_handler,
> + &adxl345_buffer_setup_ops);
> + if (ret < 0) {
> + dev_err(dev, "iio_triggered_buffer_setup failed: %d\n", ret);
> + return ret;
> + }
> +
> ret = iio_device_register(indio_dev);
> if (ret < 0)
> dev_err(dev, "iio_device_register failed: %d\n", ret);
>

\
 
 \ /
  Last update: 2017-05-01 02:43    [W:0.156 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site