lkml.org 
[lkml]   [2017]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] leds-pca963x: add bindings to invert polarity
From
Date
Hi Anders,

On 04/27/2017 08:37 AM, Anders Darander wrote:
> Add a new DT property, nxp,inverted-out, to invert the polarity of the output.
>
> Tested on PCA9634.
>
> Signed-off-by: Anders Darander <anders@chargestorm.se>
> ---
> Documentation/devicetree/bindings/leds/pca963x.txt | 1 +
> drivers/leds/leds-pca963x.c | 17 +++++++++++++++--
> include/linux/platform_data/leds-pca963x.h | 6 ++++++
> 3 files changed, 22 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt
> index dfbdb123a9bf..4eee41482041 100644
> --- a/Documentation/devicetree/bindings/leds/pca963x.txt
> +++ b/Documentation/devicetree/bindings/leds/pca963x.txt
> @@ -10,6 +10,7 @@ Optional properties:
> - nxp,period-scale : In some configurations, the chip blinks faster than expected.
> This parameter provides a scaling ratio (fixed point, decimal divided
> by 1000) to compensate, e.g. 1300=1.3x and 750=0.75x.
> +- nxp,inverted-out: invert the polarity of the generated PWM
>
> Each led is represented as a sub-node of the nxp,pca963x device.
>
> diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c
> index ded1e4dac36a..3bf9a1271819 100644
> --- a/drivers/leds/leds-pca963x.c
> +++ b/drivers/leds/leds-pca963x.c
> @@ -342,6 +342,12 @@ pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
> if (of_property_read_u32(np, "nxp,period-scale", &chip->scaling))
> chip->scaling = 1000;
>
> + /* default to non-inverted output, unless inverted is specified */
> + if (of_property_read_bool(np, "nxp,inverted-out"))
> + pdata->dir = PCA963X_INVERTED;
> + else
> + pdata->dir = PCA963X_NORMAL;
> +
> return pdata;
> }
>
> @@ -452,11 +458,18 @@ static int pca963x_probe(struct i2c_client *client,
> i2c_smbus_write_byte_data(client, PCA963X_MODE1, BIT(4));
>
> if (pdata) {
> + u8 mode2 = i2c_smbus_read_byte_data(pca963x->chip->client,
> + PCA963X_MODE2);
> /* Configure output: open-drain or totem pole (push-pull) */
> if (pdata->outdrv == PCA963X_OPEN_DRAIN)
> - i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x01);
> + mode2 |= 0x01;
> else
> - i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x05);
> + mode2 |= 0x05;
> + /* Configure direction: normal or inverted */
> + if (pdata->dir == PCA963X_INVERTED)
> + mode2 |= 0x10;
> + i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2,
> + mode2);
> }
>
> return 0;
> diff --git a/include/linux/platform_data/leds-pca963x.h b/include/linux/platform_data/leds-pca963x.h
> index e731f0036329..54e845ffb5ed 100644
> --- a/include/linux/platform_data/leds-pca963x.h
> +++ b/include/linux/platform_data/leds-pca963x.h
> @@ -33,10 +33,16 @@ enum pca963x_blink_type {
> PCA963X_HW_BLINK,
> };
>
> +enum pca963x_direction {
> + PCA963X_NORMAL,
> + PCA963X_INVERTED,
> +};
> +
> struct pca963x_platform_data {
> struct led_platform_data leds;
> enum pca963x_outdrv outdrv;
> enum pca963x_blink_type blink_type;
> + enum pca963x_direction dir;
> };
>
> #endif /* __LINUX_PCA963X_H*/
>

Thanks for the patch.

Applied to the for-4.13 branch of linux-leds.git.

--
Best regards,
Jacek Anaszewski

\
 
 \ /
  Last update: 2017-04-27 21:03    [W:0.047 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site