lkml.org 
[lkml]   [2017]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 02/10] irqchip/sunxi-nmi: add A64 R_INTC to the binding doc
Date
The A31 NMI driver seems to be using wrong base address.

As we're going to convert to use a correct NMI base address (and
correctly name it to R_INTC as the datasheet suggests), add a new
compatible string for the "correct" R_INTC, which we will use for A64
SoC.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
.../bindings/interrupt-controller/allwinner,sunxi-nmi.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
index 81cd3692405e..fea0c6a6211f 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
@@ -3,8 +3,11 @@ Allwinner Sunxi NMI Controller

Required properties:

-- compatible : should be "allwinner,sun7i-a20-sc-nmi" or
- "allwinner,sun6i-a31-sc-nmi" or "allwinner,sun9i-a80-nmi"
+- compatible : should be one of:
+ "allwinner,sun6i-a31-sc-nmi"
+ "allwinner,sun7i-a20-sc-nmi"
+ "allwinner,sun9i-a80-nmi"
+ "allwinner,sun50i-a64-r-intc"
- reg : Specifies base physical address and size of the registers.
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
--
2.12.2
\
 
 \ /
  Last update: 2017-04-26 17:28    [W:0.120 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site