lkml.org 
[lkml]   [2017]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm64: dts: exynos: Remove the te-gpios property in the TM2 boards


2017년 04월 25일 10:54에 Hoegeun Kwon 이(가) 쓴 글:
> The decon uses HW-TRIGGER, so TE interrupt is not necessary.
> Therefore, remove the te-gpios property in the TM2 dts.
>
> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
> ---
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> index 3ff9527..23191eb 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> @@ -60,7 +60,6 @@
> vci-supply = <&ldo28_reg>;
> reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
> enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
> - te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;

Reviewed-by: Inki Dae <inki.dae@samsung.com>

Thanks,
Inki Dae

> };
> };
>
>

\
 
 \ /
  Last update: 2017-04-25 09:13    [W:0.061 / U:0.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site