lkml.org 
[lkml]   [2017]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/3] [media] si2157: get chip id during probing
From
Date
On 03/16/2017 12:22 AM, Andreas Kemnade wrote:
> If the si2157 is behind a e.g. si2168, the si2157 will
> at least in some situations not be readable after the si268
> got the command 0101. It still accepts commands but the answer
> is just ffffff. So read the chip id before that so the
> information is not lost.
>
> The following line in kernel output is a symptome
> of that problem:
> si2157 7-0063: unknown chip version Si21255-\xffffffff\xffffffff\xffffffff
That is hackish solution :( Somehow I2C reads should be get working
rather than making this kind of work-around. Returning 0xff to i2c reads
means that signal strength also shows some wrong static value?

regards
Antti

--
http://palosaari.fi/

\
 
 \ /
  Last update: 2017-04-23 14:19    [W:1.433 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site