lkml.org 
[lkml]   [2017]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2 v4] dt-bindings: display: imx: entry for AUS mode
Date
Allow setting AUS mode for a display from the device tree. Use an
optional boolean property. AUS mode can be set only on imx21 and
compatible chipsets.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Rob Herring <robh@kernel.org>
---
sending this again, I missed the v4 in the Subject line

v4:
rename the DT property to fsl,aus-mode

v3:
use a boolean DT property instead of the register value
separate patches for DT binding and code changes

v2:
re-sending DT bindings and code changes as one patch

Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
index 7a5c0e2..e5a8b36 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
@@ -13,6 +13,8 @@ Required nodes:
Additional, the display node has to define properties:
- bits-per-pixel: Bits per pixel
- fsl,pcr: LCDC PCR value
+ A display node may optionally define
+ - fsl,aus-mode: boolean to enable AUS mode (only for imx21)

Optional properties:
- lcd-supply: Regulator for LCD supply voltage.
--
2.1.4
\
 
 \ /
  Last update: 2017-04-21 14:32    [W:0.263 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site