lkml.org 
[lkml]   [2017]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 2/3] v4l: Add 10/16-bits per channel YUV pixel formats
From
Date


On 04/18/2017 03:33 AM, Mauro Carvalho Chehab wrote:
> Em Sun, 5 Mar 2017 18:00:32 +0800
> Randy Li <ayaka@soulik.info> escreveu:
>
>> The formats added by this patch are:
>> V4L2_PIX_FMT_P010
>> V4L2_PIX_FMT_P010M
>> V4L2_PIX_FMT_P016
>> V4L2_PIX_FMT_P016M
>> Currently, none of driver uses those format.
>>
>> Also a variant of V4L2_PIX_FMT_P010M pixel format is added.
>> The V4L2_PIX_FMT_P010CM is a compat variant of the V4L2_PIX_FMT_P010,
Some developers from Gstreamer think it should be renamed as CM10 for
the P010CM, I don't have much idea about that.
>> which uses the unused 6 bits to store the next pixel. And with
>> the alignment requirement of the hardware, it usually would be
>> some extra space left at the end of a stride.
> You should check your patches with checkpatch... I'm getting
> this:
>
>
> WARNING: 'simliar' may be misspelled - perhaps 'similar'?
> #61: FILE: Documentation/media/uapi/v4l/pixfmt-p010.rst:13:
> +chroma samples as simliar to ``V4L2_PIX_FMT_NV12``
I am sorry about that
>
>
> WARNING: 'simliar' may be misspelled - perhaps 'similar'?
> #334: FILE: Documentation/media/uapi/v4l/pixfmt-p016.rst:13:
> +chroma samples as simliar to ``V4L2_PIX_FMT_NV12``
>
>
>> Signed-off-by: Randy Li <ayaka@soulik.info>
>> ---
>> Documentation/media/uapi/v4l/pixfmt-p010.rst | 126 ++++++++++++++++++++++++
>> Documentation/media/uapi/v4l/pixfmt-p010m.rst | 135 ++++++++++++++++++++++++++
>> Documentation/media/uapi/v4l/pixfmt-p016.rst | 125 ++++++++++++++++++++++++
>> Documentation/media/uapi/v4l/pixfmt-p016m.rst | 134 +++++++++++++++++++++++++
>> Documentation/media/uapi/v4l/yuv-formats.rst | 4 +
>> include/uapi/linux/videodev2.h | 5 +
>> 6 files changed, 529 insertions(+)
>> create mode 100644 Documentation/media/uapi/v4l/pixfmt-p010.rst
>> create mode 100644 Documentation/media/uapi/v4l/pixfmt-p010m.rst
>> create mode 100644 Documentation/media/uapi/v4l/pixfmt-p016.rst
>> create mode 100644 Documentation/media/uapi/v4l/pixfmt-p016m.rst
>>
>> diff --git a/Documentation/media/uapi/v4l/pixfmt-p010.rst b/Documentation/media/uapi/v4l/pixfmt-p010.rst
>> new file mode 100644
>> index 0000000..59ed118
>> --- /dev/null
>> +++ b/Documentation/media/uapi/v4l/pixfmt-p010.rst
>> @@ -0,0 +1,126 @@
>> +.. -*- coding: utf-8; mode: rst -*-
>> +
>> +.. _V4L2-PIX-FMT-P010:
>> +
>> +******************************************************
>> +V4L2_PIX_FMT_P010 ('P010')
>> +******************************************************
>> +
>> +
>> +V4L2_PIX_FMT_P010
>> +Formats with ½ horizontal and vertical chroma resolution. One luminance and
>> +one chrominance plane with alternating
>> +chroma samples as simliar to ``V4L2_PIX_FMT_NV12``
> It is probably ok to use the UTF symbol for 1/2, but you should check
> if both PDF and HTML outputs will be ok.
I see, I would upload a new version later
>
>> +
>> +
>> +Description
>> +===========
>> +
>> +It is a two-plane versions of the YUV 4:2:0 format. The three
>> +components are separated into two sub-images or planes. The Y plane is
>> +first. The Y plane has 16 bits per pixel, but only 10 bits are used with the
>> +rest 6 bits set to zero. For ``V4L2_PIX_FMT_P010``, a combined CbCr plane
>> +immediately follows the Y plane in memory. The CbCr
>> +plane is the same width, in bytes, as the Y plane (and of the image),
>> +but is half as tall in pixels. Each CbCr pair belongs to four pixels.
>> +For example, Cb\ :sub:`0`/Cr\ :sub:`0` belongs to Y'\ :sub:`00`,
>> +Y'\ :sub:`01`, Y'\ :sub:`10`, Y'\ :sub:`11`.
>> +If the Y plane has pad bytes after each row, then the CbCr plane has as
>> +many pad bytes after its rows.
>> +
>> +**Byte Order.**
>> +Each cell is two bytes.
>> +
>> +
>> +.. flat-table::
>> + :header-rows: 0
>> + :stub-columns: 0
>> +
>> + * - start + 0:
>> + - Y'\ :sub:`00`
>> + - Y'\ :sub:`01`
>> + - Y'\ :sub:`02`
>> + - Y'\ :sub:`03`
>> + * - start + 4:
>> + - Y'\ :sub:`10`
>> + - Y'\ :sub:`11`
>> + - Y'\ :sub:`12`
>> + - Y'\ :sub:`13`
>> + * - start + 8:
>> + - Y'\ :sub:`20`
>> + - Y'\ :sub:`21`
>> + - Y'\ :sub:`22`
>> + - Y'\ :sub:`23`
>> + * - start + 12:
>> + - Y'\ :sub:`30`
>> + - Y'\ :sub:`31`
>> + - Y'\ :sub:`32`
>> + - Y'\ :sub:`33`
>> + * - start + 16:
>> + - Cb\ :sub:`00`
>> + - Cr\ :sub:`00`
>> + - Cb\ :sub:`01`
>> + - Cr\ :sub:`01`
>> + * - start + 20:
>> + - Cb\ :sub:`10`
>> + - Cr\ :sub:`10`
>> + - Cb\ :sub:`11`
>> + - Cr\ :sub:`11`
>> +
>> +
>> +**Color Sample Location..**
>> +
>> +.. flat-table::
>> + :header-rows: 0
>> + :stub-columns: 0
>> +
>> + * -
>> + - 0
>> + -
>> + - 1
>> + - 2
>> + -
>> + - 3
>> + * - 0
>> + - Y
>> + -
>> + - Y
>> + - Y
>> + -
>> + - Y
>> + * -
>> + -
>> + - C
>> + -
>> + -
>> + - C
>> + -
>> + * - 1
>> + - Y
>> + -
>> + - Y
>> + - Y
>> + -
>> + - Y
>> + * -
>> + * - 2
>> + - Y
>> + -
>> + - Y
>> + - Y
>> + -
>> + - Y
>> + * -
>> + -
>> + - C
>> + -
>> + -
>> + - C
>> + -
>> + * - 3
>> + - Y
>> + -
>> + - Y
>> + - Y
>> + -
>> + - Y
>> diff --git a/Documentation/media/uapi/v4l/pixfmt-p010m.rst b/Documentation/media/uapi/v4l/pixfmt-p010m.rst
>> new file mode 100644
>> index 0000000..6697d15
>> --- /dev/null
>> +++ b/Documentation/media/uapi/v4l/pixfmt-p010m.rst
>> @@ -0,0 +1,135 @@
>> +.. -*- coding: utf-8; mode: rst -*-
>> +
>> +.. _V4L2-PIX-FMT-P010M:
>> +
>> +***********************************************************************************
>> +V4L2_PIX_FMT_P010M ('PM10')
>> +***********************************************************************************
>> +
>> +
>> +V4L2_PIX_FMT_P010M
>> +Variation of ``V4L2_PIX_FMT_P010`` with planes non contiguous in memory.
>> +
>> +
>> +Description
>> +===========
>> +
>> +This is a multi-planar, two-plane version of the YUV 4:2:0 format. The
>> +three components are separated into two sub-images or planes.
>> +``V4L2_PIX_FMT_P010M`` differs from ``V4L2_PIX_FMT_P010`` in that the
>> +two planes are non-contiguous in memory, i.e. the chroma plane do not
>> +necessarily immediately follows the luma plane. The luminance data
>> +occupies the first plane. The Y plane has 16 bits per pixel, but only
>> +10 bits are used with the rest 6 bits set to zero. In the
>> +second plane there is a chrominance data with alternating chroma
>> +samples. The CbCr plane is the same width, in bytes, as the Y plane (and
>> +of the image), but is half as tall in pixels. Each CbCr pair belongs to
>> +four pixels. For example, Cb\ :sub:`0`/Cr\ :sub:`0` belongs to
>> +Y'\ :sub:`00`, Y'\ :sub:`01`, Y'\ :sub:`10`, Y'\ :sub:`11`.
>> +
>> +``V4L2_PIX_FMT_P010M`` is intended to be used only in drivers and
>> +applications that support the multi-planar API, described in
>> +:ref:`planar-apis`.
>> +
>> +If the Y plane has pad bytes after each row, then the CbCr plane has as
>> +many pad bytes after its rows.
>> +
>> +**Byte Order.**
>> +Each cell is two bytes.
>> +
>> +.. flat-table::
>> + :header-rows: 0
>> + :stub-columns: 0
>> +
>> + * - start0 + 0:
>> + - Y'\ :sub:`00`
>> + - Y'\ :sub:`01`
>> + - Y'\ :sub:`02`
>> + - Y'\ :sub:`03`
>> + * - start0 + 4:
>> + - Y'\ :sub:`10`
>> + - Y'\ :sub:`11`
>> + - Y'\ :sub:`12`
>> + - Y'\ :sub:`13`
>> + * - start0 + 8:
>> + - Y'\ :sub:`20`
>> + - Y'\ :sub:`21`
>> + - Y'\ :sub:`22`
>> + - Y'\ :sub:`23`
>> + * - start0 + 12:
>> + - Y'\ :sub:`30`
>> + - Y'\ :sub:`31`
>> + - Y'\ :sub:`32`
>> + - Y'\ :sub:`33`
>> + * -
>> + * - start1 + 0:
>> + - Cb\ :sub:`00`
>> + - Cr\ :sub:`00`
>> + - Cb\ :sub:`01`
>> + - Cr\ :sub:`01`
>> + * - start1 + 4:
>> + - Cb\ :sub:`10`
>> + - Cr\ :sub:`10`
>> + - Cb\ :sub:`11`
>> + - Cr\ :sub:`11`
>> +
>> +
>> +**Color Sample Location..**
>> +
>> +
>> +
>> +.. flat-table::
>> + :header-rows: 0
>> + :stub-columns: 0
>> +
>> + * -
>> + - 0
>> + -
>> + - 1
>> + - 2
>> + -
>> + - 3
>> + * - 0
>> + - Y
>> + -
>> + - Y
>> + - Y
>> + -
>> + - Y
>> + * -
>> + -
>> + - C
>> + -
>> + -
>> + - C
>> + -
>> + * - 1
>> + - Y
>> + -
>> + - Y
>> + - Y
>> + -
>> + - Y
>> + * -
>> + * - 2
>> + - Y
>> + -
>> + - Y
>> + - Y
>> + -
>> + - Y
>> + * -
>> + -
>> + - C
>> + -
>> + -
>> + -
>> + - C
>> + -
>> + * - 3
>> + - Y
>> + -
>> + - Y
>> + - Y
>> + -
>> + - Y
>> diff --git a/Documentation/media/uapi/v4l/pixfmt-p016.rst b/Documentation/media/uapi/v4l/pixfmt-p016.rst
>> new file mode 100644
>> index 0000000..a6d60b3
>> --- /dev/null
>> +++ b/Documentation/media/uapi/v4l/pixfmt-p016.rst
>> @@ -0,0 +1,125 @@
>> +.. -*- coding: utf-8; mode: rst -*-
>> +
>> +.. _V4L2-PIX-FMT-P016:
>> +
>> +******************************************************
>> +V4L2_PIX_FMT_P016 ('P016')
>> +******************************************************
>> +
>> +
>> +V4L2_PIX_FMT_P016
>> +Formats with ½ horizontal and vertical chroma resolution. One luminance and
>> +one chrominance plane with alternating
>> +chroma samples as simliar to ``V4L2_PIX_FMT_NV12``
>> +
>> +
>> +Description
>> +===========
>> +
>> +It is a two-plane versions of the YUV 4:2:0 format. The three
>> +components are separated into two sub-images or planes. The Y plane is
>> +first. The Y plane has 16 bits per pixel. For ``V4L2_PIX_FMT_P016``, a
>> +combined CbCr plane immediately follows the Y plane in memory. The CbCr
>> +plane is the same width, in bytes, as the Y plane (and of the image),
>> +but is half as tall in pixels. Each CbCr pair belongs to four pixels.
>> +For example, Cb\ :sub:`0`/Cr\ :sub:`0` belongs to Y'\ :sub:`00`,
>> +Y'\ :sub:`01`, Y'\ :sub:`10`, Y'\ :sub:`11`.
>> +If the Y plane has pad bytes after each row, then the CbCr plane has as
>> +many pad bytes after its rows.
>> +
>> +**Byte Order.**
>> +Each cell is two bytes.
>> +
>> +
>> +.. flat-table::
>> + :header-rows: 0
>> + :stub-columns: 0
>> +
>> + * - start + 0:
>> + - Y'\ :sub:`00`
>> + - Y'\ :sub:`01`
>> + - Y'\ :sub:`02`
>> + - Y'\ :sub:`03`
>> + * - start + 4:
>> + - Y'\ :sub:`10`
>> + - Y'\ :sub:`11`
>> + - Y'\ :sub:`12`
>> + - Y'\ :sub:`13`
>> + * - start + 8:
>> + - Y'\ :sub:`20`
>> + - Y'\ :sub:`21`
>> + - Y'\ :sub:`22`
>> + - Y'\ :sub:`23`
>> + * - start + 12:
>> + - Y'\ :sub:`30`
>> + - Y'\ :sub:`31`
>> + - Y'\ :sub:`32`
>> + - Y'\ :sub:`33`
>> + * - start + 16:
>> + - Cb\ :sub:`00`
>> + - Cr\ :sub:`00`
>> + - Cb\ :sub:`01`
>> + - Cr\ :sub:`01`
>> + * - start + 20:
>> + - Cb\ :sub:`10`
>> + - Cr\ :sub:`10`
>> + - Cb\ :sub:`11`
>> + - Cr\ :sub:`11`
>> +
>> +
>> +**Color Sample Location..**
>> +
>> +.. flat-table::
>> + :header-rows: 0
>> + :stub-columns: 0
>> +
>> + * -
>> + - 0
>> + -
>> + - 1
>> + - 2
>> + -
>> + - 3
>> + * - 0
>> + - Y
>> + -
>> + - Y
>> + - Y
>> + -
>> + - Y
>> + * -
>> + -
>> + - C
>> + -
>> + -
>> + - C
>> + -
>> + * - 1
>> + - Y
>> + -
>> + - Y
>> + - Y
>> + -
>> + - Y
>> + * -
>> + * - 2
>> + - Y
>> + -
>> + - Y
>> + - Y
>> + -
>> + - Y
>> + * -
>> + -
>> + - C
>> + -
>> + -
>> + - C
>> + -
>> + * - 3
>> + - Y
>> + -
>> + - Y
>> + - Y
>> + -
>> + - Y
>> diff --git a/Documentation/media/uapi/v4l/pixfmt-p016m.rst b/Documentation/media/uapi/v4l/pixfmt-p016m.rst
>> new file mode 100644
>> index 0000000..14c434d
>> --- /dev/null
>> +++ b/Documentation/media/uapi/v4l/pixfmt-p016m.rst
>> @@ -0,0 +1,134 @@
>> +.. -*- coding: utf-8; mode: rst -*-
>> +
>> +.. _V4L2-PIX-FMT-P016M:
>> +
>> +***********************************************************************************
>> +V4L2_PIX_FMT_P016M ('PM16')
>> +***********************************************************************************
>> +
>> +
>> +V4L2_PIX_FMT_P016M
>> +Variation of ``V4L2_PIX_FMT_P016`` with planes non contiguous in memory.
>> +
>> +
>> +Description
>> +===========
>> +
>> +This is a multi-planar, two-plane version of the YUV 4:2:0 format. The
>> +three components are separated into two sub-images or planes.
>> +``V4L2_PIX_FMT_P016M`` differs from ``V4L2_PIX_FMT_P016`` in that the
>> +two planes are non-contiguous in memory, i.e. the chroma plane do not
>> +necessarily immediately follows the luma plane. The luminance data
>> +occupies the first plane. The Y plane has 16 bits per pixel. In the
>> +second plane there is a chrominance data with alternating chroma
>> +samples. The CbCr plane is the same width, in bytes, as the Y plane (and
>> +of the image), but is half as tall in pixels. Each CbCr pair belongs to
>> +four pixels. For example, Cb\ :sub:`0`/Cr\ :sub:`0` belongs to
>> +Y'\ :sub:`00`, Y'\ :sub:`01`, Y'\ :sub:`10`, Y'\ :sub:`11`.
>> +
>> +``V4L2_PIX_FMT_P016M`` is intended to be used only in drivers and
>> +applications that support the multi-planar API, described in
>> +:ref:`planar-apis`.
>> +
>> +If the Y plane has pad bytes after each row, then the CbCr plane has as
>> +many pad bytes after its rows.
>> +
>> +**Byte Order.**
>> +Each cell is two bytes.
>> +
>> +.. flat-table::
>> + :header-rows: 0
>> + :stub-columns: 0
>> +
>> + * - start0 + 0:
>> + - Y'\ :sub:`00`
>> + - Y'\ :sub:`01`
>> + - Y'\ :sub:`02`
>> + - Y'\ :sub:`03`
>> + * - start0 + 4:
>> + - Y'\ :sub:`10`
>> + - Y'\ :sub:`11`
>> + - Y'\ :sub:`12`
>> + - Y'\ :sub:`13`
>> + * - start0 + 8:
>> + - Y'\ :sub:`20`
>> + - Y'\ :sub:`21`
>> + - Y'\ :sub:`22`
>> + - Y'\ :sub:`23`
>> + * - start0 + 12:
>> + - Y'\ :sub:`30`
>> + - Y'\ :sub:`31`
>> + - Y'\ :sub:`32`
>> + - Y'\ :sub:`33`
>> + * -
>> + * - start1 + 0:
>> + - Cb\ :sub:`00`
>> + - Cr\ :sub:`00`
>> + - Cb\ :sub:`01`
>> + - Cr\ :sub:`01`
>> + * - start1 + 4:
>> + - Cb\ :sub:`10`
>> + - Cr\ :sub:`10`
>> + - Cb\ :sub:`11`
>> + - Cr\ :sub:`11`
>> +
>> +
>> +**Color Sample Location..**
>> +
>> +
>> +
>> +.. flat-table::
>> + :header-rows: 0
>> + :stub-columns: 0
>> +
>> + * -
>> + - 0
>> + -
>> + - 1
>> + - 2
>> + -
>> + - 3
>> + * - 0
>> + - Y
>> + -
>> + - Y
>> + - Y
>> + -
>> + - Y
>> + * -
>> + -
>> + - C
>> + -
>> + -
>> + - C
>> + -
>> + * - 1
>> + - Y
>> + -
>> + - Y
>> + - Y
>> + -
>> + - Y
>> + * -
>> + * - 2
>> + - Y
>> + -
>> + - Y
>> + - Y
>> + -
>> + - Y
>> + * -
>> + -
>> + - C
>> + -
>> + -
>> + -
>> + - C
>> + -
>> + * - 3
>> + - Y
>> + -
>> + - Y
>> + - Y
>> + -
>> + - Y
>> diff --git a/Documentation/media/uapi/v4l/yuv-formats.rst b/Documentation/media/uapi/v4l/yuv-formats.rst
>> index 3334ea4..1474192 100644
>> --- a/Documentation/media/uapi/v4l/yuv-formats.rst
>> +++ b/Documentation/media/uapi/v4l/yuv-formats.rst
>> @@ -53,3 +53,7 @@ to brightness information.
>> pixfmt-nv16m
>> pixfmt-nv24
>> pixfmt-m420
>> + pixfmt-p010
>> + pixfmt-p010m
>> + pixfmt-p016
>> + pixfmt-p016m
>> diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
>> index 45184a2..d2f2013 100644
>> --- a/include/uapi/linux/videodev2.h
>> +++ b/include/uapi/linux/videodev2.h
>> @@ -550,6 +550,8 @@ struct v4l2_pix_format {
>> #define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */
>> #define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */
>> #define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */
>> +#define V4L2_PIX_FMT_P010 v4l2_fourcc('P', '0', '1', '0') /* 20 Y/CbCr 4:2:0, 10 bits per channel */
>> +#define V4L2_PIX_FMT_P016 v4l2_fourcc('P', '0', '1', '6') /* 32 Y/CbCr 4:2:0, 16 bits per channel */
>>
>> /* two non contiguous planes - one Y, one Cr + Cb interleaved */
>> #define V4L2_PIX_FMT_NV12M v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */
>> @@ -558,6 +560,9 @@ struct v4l2_pix_format {
>> #define V4L2_PIX_FMT_NV61M v4l2_fourcc('N', 'M', '6', '1') /* 16 Y/CrCb 4:2:2 */
>> #define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 macroblocks */
>> #define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 macroblocks */
>> +#define V4L2_PIX_FMT_P010M v4l2_fourcc('P', 'M', '1', '0') /* 32 Y/CbCr 4:2:0, 10 bits per channel */
>> +#define V4L2_PIX_FMT_P016M v4l2_fourcc('P', 'M', '1', '6') /* 32 Y/CbCr 4:2:0, 16 bits per channel */
>> +#define V4L2_PIX_FMT_P010CM v4l2_fourcc('C', 'M', '1', '0') /* 20 Y/CbCr 4:2:0, 10 bits per channel, compact format */
>>
>> /* three planes - Y Cb, Cr */
>> #define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */
>
>
> Thanks,
> Mauro

\
 
 \ /
  Last update: 2017-04-21 13:07    [W:1.037 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site