lkml.org 
[lkml]   [2017]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[RFC PATCH v2 4/4] ARM: sun8i: h3: add support for the thermal sensor in H3
    Date
    As we have gained the support for the thermal sensor in H3, we can now
    add its device nodes to the device tree.

    Add them to the H3 device tree.

    The H5 thermal sensor has some differences, and will be added furtherly.

    Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
    ---
    arch/arm/boot/dts/sun8i-h3.dtsi | 26 ++++++++++++++++++++++++++
    1 file changed, 26 insertions(+)

    diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
    index b36f9f423c39..552217bb9266 100644
    --- a/arch/arm/boot/dts/sun8i-h3.dtsi
    +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
    @@ -72,6 +72,32 @@
    };
    };

    + iio-hwmon {
    + compatible = "iio-hwmon";
    + io-channels = <&ths>;
    + };
    +
    + soc {
    + ths: ths@01c25000 {
    + compatible = "allwinner,sun8i-h3-ths";
    + reg = <0x01c25000 0x100>;
    + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
    + clock-names = "bus", "ths";
    + resets = <&ccu RST_BUS_THS>;
    + #thermal-sensor-cells = <0>;
    + #io-channel-cells = <0>;
    + };
    + };
    +
    + thermal-zones {
    + cpu_thermal {
    + /* milliseconds */
    + polling-delay-passive = <250>;
    + polling-delay = <1000>;
    + thermal-sensors = <&ths>;
    + };
    + };
    +
    timer {
    compatible = "arm,armv7-timer";
    interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
    --
    2.12.2
    \
     
     \ /
      Last update: 2017-04-02 15:44    [W:3.570 / U:0.056 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site