lkml.org 
[lkml]   [2017]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] mfd: omap-usb-tll: Configure ULPIAUTOIDLE
From
Date
On 15/04/17 20:05, Tony Lindgren wrote:
> The idle mode needs to be only disabled for UTMIAUTOIDLE while
> ULPIAUTOIDLE can be enabled.
>
> This matches the TLL_CHANNEL_CONF_i register configuration for ehci-tll
> in the Motorola Linux kernel tree for Wrigley 3G LTE modem on droid 4
> and the modem still stays responsive.
>
> Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
> Cc: Keshava Munegowda <keshava_mgowda@ti.com>
> Cc: Marcel Partap <mpartap@gmx.net>
> Cc: Michael Scott <michael.scott@linaro.org>
> Cc: Roger Quadros <rogerq@ti.com>
> Cc: Sebastian Reichel <sre@kernel.org>
> Signed-off-by: Tony Lindgren <tony@atomide.com>

Acked-by: Roger Quadros <rogerq@ti.com>

> ---
> drivers/mfd/omap-usb-tll.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
> --- a/drivers/mfd/omap-usb-tll.c
> +++ b/drivers/mfd/omap-usb-tll.c
> @@ -373,12 +373,13 @@ int omap_tll_init(struct usbhs_omap_platform_data *pdata)
> } else if (pdata->port_mode[i] ==
> OMAP_EHCI_PORT_MODE_TLL) {
> /*
> - * Disable AutoIdle, BitStuffing
> - * and use SDR Mode
> + * Disable UTMI AutoIdle, BitStuffing
> + * and use SDR Mode. Enable ULPI AutoIdle.
> */
> reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
> | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
> reg |= OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF;
> + reg |= OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE;
> } else if (pdata->port_mode[i] ==
> OMAP_EHCI_PORT_MODE_HSIC) {
> /*
>

cheers,
-roger

\
 
 \ /
  Last update: 2017-04-18 10:34    [W:0.096 / U:13.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site