lkml.org 
[lkml]   [2017]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/4] input: xpad.rst: Don't use literal blocks inside footnotes
On Mon, Apr 17, 2017 at 09:46:14AM -0300, Mauro Carvalho Chehab wrote:
> Unfortunately, Sphinx (or LaTeX) can't handle literal blocks
> inside footnotes. So, just use normal text for the two
> literal code-blocks that documents the output of
> /sys/kernel/debug/usb/devices for xpad devices.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Applied, thank you.

> ---
> Documentation/input/devices/xpad.rst | 51 ++++++++++++++++++------------------
> 1 file changed, 25 insertions(+), 26 deletions(-)
>
> diff --git a/Documentation/input/devices/xpad.rst b/Documentation/input/devices/xpad.rst
> index e19669fe5a80..c7c4e154bd34 100644
> --- a/Documentation/input/devices/xpad.rst
> +++ b/Documentation/input/devices/xpad.rst
> @@ -138,15 +138,37 @@ Driver Installation
>
> Once you have the adapter cable, if needed, and the controller connected
> the xpad module should be auto loaded. To confirm you can cat
> -/sys/kernel/debug/usb/devices. There should be an entry like the one at the end [4]_.
> +/sys/kernel/debug/usb/devices. There should be an entry like those:
>
> +.. code-block:: none
> + :caption: dump from InterAct PowerPad Pro (Germany)
> +
> + T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
> + D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=32 #Cfgs= 1
> + P: Vendor=05fd ProdID=107a Rev= 1.00
> + C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> + I: If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=(none)
> + E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl= 10ms
> + E: Ad=02(O) Atr=03(Int.) MxPS= 32 Ivl= 10ms
> +
> +.. code-block:: none
> + :caption: dump from Redoctane Xbox Dance Pad (US)
> +
> + T: Bus=01 Lev=02 Prnt=09 Port=00 Cnt=01 Dev#= 10 Spd=12 MxCh= 0
> + D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> + P: Vendor=0c12 ProdID=8809 Rev= 0.01
> + S: Product=XBOX DDR
> + C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> + I: If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=xpad
> + E: Ad=82(I) Atr=03(Int.) MxPS= 32 Ivl=4ms
> + E: Ad=02(O) Atr=03(Int.) MxPS= 32 Ivl=4ms
>
>
> Supported Controllers
> =====================
>
> For a full list of supported controllers and associated vendor and product
> -IDs see the xpad_device[] array[6].
> +IDs see the xpad_device[] array\ [4]_.
>
> As of the historic version 0.0.6 (2006-10-10) the following devices
> were supported::
> @@ -202,30 +224,7 @@ References
> .. [1] http://euc.jp/periphs/xbox-controller.ja.html (ITO Takayuki)
> .. [2] http://xpad.xbox-scene.com/
> .. [3] http://www.markosweb.com/www/xboxhackz.com/
> -.. [4] /sys/kernel/debug/usb/devices - dump from InterAct PowerPad Pro (Germany):
> -
> - ::
> -
> - T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
> - D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=32 #Cfgs= 1
> - P: Vendor=05fd ProdID=107a Rev= 1.00
> - C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> - I: If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=(none)
> - E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl= 10ms
> - E: Ad=02(O) Atr=03(Int.) MxPS= 32 Ivl= 10ms
> -.. [5] /sys/kernel/debug/usb/devices - dump from Redoctane Xbox Dance Pad (US):
> -
> - ::
> -
> - T: Bus=01 Lev=02 Prnt=09 Port=00 Cnt=01 Dev#= 10 Spd=12 MxCh= 0
> - D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> - P: Vendor=0c12 ProdID=8809 Rev= 0.01
> - S: Product=XBOX DDR
> - C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> - I: If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=xpad
> - E: Ad=82(I) Atr=03(Int.) MxPS= 32 Ivl=4ms
> - E: Ad=02(O) Atr=03(Int.) MxPS= 32 Ivl=4ms
> -.. [6] http://lxr.free-electrons.com/ident?i=xpad_device
> +.. [4] http://lxr.free-electrons.com/ident?i=xpad_device
>
>
> Historic Edits
> --
> 2.9.3
>

--
Dmitry

\
 
 \ /
  Last update: 2017-04-18 05:12    [W:1.061 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site