lkml.org 
[lkml]   [2017]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] powerpc/mm: some cleanup of do_page_fault()
Date
This patch is a bunch of small cleanups of the do_page_fault()
function:
1/ Function store_updates_sp() checks whether the faulting
instruction is a store updating r1. Therefore we can limit its calls
to stores exceptions
2/ Only the get_user() in store_updates_sp() has to be done outside
the mm semaphore. All the comparison can be done within the semaphore,
so only when really needed.
3/ As we got a DSI exception, the address pointed by regs->nip is
obviously valid, otherwise we would have had a instruction exception.
So __get_user() can be used instead of get_user()
4/ Replaced one duplicate 'trap == 0x400' by 'is_exec'
5/ Created a 'is_user = user_mode(regs)' and replaced all
'user_mode(regs)'.
Analysis of the assembly code shows that when using user_mode(regs),
at least the 'andi. r7,r8,16384' is redone several times, and also
the 'lwz r8,132(r31)' at times. With the new form, the 'is_user'
is mapped to cr4, then all further use of is_user results in just
things like 'beq cr4,218 <do_page_fault+0x218>'
6/ The 8xx has a dedicated exception for breakpoints, that directly
calls do_break()
7/ stdu and stdux only exist on PPC64, so no need to check for them
on PPC32

With this patch, on PPC8xx the size of do_page_fault() is reduced by
12% (from 1420 bytes to 1248 bytes)

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/mm/fault.c | 34 ++++++++++++++++++----------------
1 file changed, 18 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 3a7d580fdc59..5aa43268baca 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -73,12 +73,8 @@ static inline int notify_page_fault(struct pt_regs *regs)
* Check whether the instruction at regs->nip is a store using
* an update addressing form which will update r1.
*/
-static int store_updates_sp(struct pt_regs *regs)
+static int store_updates_sp(unsigned int inst)
{
- unsigned int inst;
-
- if (get_user(inst, (unsigned int __user *)regs->nip))
- return 0;
/* check for 1 in the rA field */
if (((inst >> 16) & 0x1f) != 1)
return 0;
@@ -90,12 +86,16 @@ static int store_updates_sp(struct pt_regs *regs)
case 53: /* stfsu */
case 55: /* stfdu */
return 1;
+#ifdef CONFIG_PPC64
case 62: /* std or stdu */
return (inst & 3) == 1;
+#endif
case 31:
/* check minor opcode */
switch ((inst >> 1) & 0x3ff) {
+#ifdef CONFIG_PPC64
case 181: /* stdux */
+#endif
case 183: /* stwux */
case 247: /* stbux */
case 439: /* sthux */
@@ -207,7 +207,9 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
int trap = TRAP(regs);
int is_exec = trap == 0x400;
int fault;
- int rc = 0, store_update_sp = 0;
+ int rc = 0;
+ int is_user = user_mode(regs);
+ unsigned int inst = 0;

#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
/*
@@ -216,7 +218,7 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
* bits we are interested in. But there are some bits which
* indicate errors in DSISR but can validly be set in SRR1.
*/
- if (trap == 0x400)
+ if (is_exec)
error_code &= 0x48200000;
else
is_write = error_code & DSISR_ISSTORE;
@@ -247,13 +249,13 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
* The kernel should never take an execute fault nor should it
* take a page fault to a kernel address.
*/
- if (!user_mode(regs) && (is_exec || (address >= TASK_SIZE))) {
+ if (!is_user && (is_exec || (address >= TASK_SIZE))) {
rc = SIGSEGV;
goto bail;
}

#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE) || \
- defined(CONFIG_PPC_BOOK3S_64))
+ defined(CONFIG_PPC_BOOK3S_64) || defined(CONFIG_PPC_8xx))
if (error_code & DSISR_DABRMATCH) {
/* breakpoint match */
do_break(regs, address, error_code);
@@ -266,7 +268,7 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
local_irq_enable();

if (faulthandler_disabled() || mm == NULL) {
- if (!user_mode(regs)) {
+ if (!is_user) {
rc = SIGSEGV;
goto bail;
}
@@ -287,10 +289,10 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
* can result in fault, which will cause a deadlock when called with
* mmap_sem held
*/
- if (!is_exec && user_mode(regs))
- store_update_sp = store_updates_sp(regs);
+ if (is_write && is_user)
+ __get_user(inst, (unsigned int __user *)regs->nip);

- if (user_mode(regs))
+ if (is_user)
flags |= FAULT_FLAG_USER;

/* When running in the kernel we expect faults to occur only to
@@ -309,7 +311,7 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
* thus avoiding the deadlock.
*/
if (!down_read_trylock(&mm->mmap_sem)) {
- if (!user_mode(regs) && !search_exception_tables(regs->nip))
+ if (!is_user && !search_exception_tables(regs->nip))
goto bad_area_nosemaphore;

retry:
@@ -358,7 +360,7 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
* between the last mapped region and the stack will
* expand the stack rather than segfaulting.
*/
- if (address + 2048 < uregs->gpr[1] && !store_update_sp)
+ if (address + 2048 < uregs->gpr[1] && !store_updates_sp(inst))
goto bad_area;
}
if (expand_stack(vma, address))
@@ -509,7 +511,7 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,

bad_area_nosemaphore:
/* User mode accesses cause a SIGSEGV */
- if (user_mode(regs)) {
+ if (is_user) {
_exception(SIGSEGV, regs, code, address);
goto bail;
}
--
2.12.0
\
 
 \ /
  Last update: 2017-04-13 16:54    [W:0.065 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site