Messages in this thread | | | From | Andrey Smirnov <> | Subject | [PATCH 0/8] i.MX7 PCIe related device tree changes | Date | Thu, 13 Apr 2017 06:32:34 -0700 |
| |
Shawn, everyone:
This series includes changes made to device-tree in order to support PCIe on i.MX7 platform. They include:
- Bringing 'anatop-enable-bit' property of ANATOP regulators back and extending it to all of the HW it is applicable to
- Adding GPCv2 node for i.MX7 (which was missing, despite the irqchip driver for it being in the tree for quite some time)
- Adding a PCIe node for i.MX7
- Adding GPIO expander used by PCIe and enabling PCIe node from above on i.MX7 based Sabre board
As usual, feedback is welcome.
Thanks, Andrey Smrinov
Andrey Smirnov (8): Revert "ARM: dts: imx: Remove unexistant property" ARM: dts: imx6: Specify 'anatop-enable-bit' where appropriate ARM: dts: imx7s: Adjust anatop-enable-bit for 'reg_1p0d' ARM: dts: imx7s: Add node for GPC ARM: dts: imx7s: Mark 'gpr' compatible with i.MX6 variant ARM: dts: imx7d-sdb: Add GPIO expander node ARM: dts: imx7d: Add node for PCIe controller ARM: dts: imx7d-sdb: Enable PCIe peripheral
arch/arm/boot/dts/imx6qdl.dtsi | 3 +++ arch/arm/boot/dts/imx6sl.dtsi | 3 +++ arch/arm/boot/dts/imx6sx.dtsi | 3 +++ arch/arm/boot/dts/imx6ul.dtsi | 1 + arch/arm/boot/dts/imx7d-sdb.dts | 39 +++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx7d.dtsi | 38 ++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx7s.dtsi | 31 +++++++++++++++++++++++++++++-- 7 files changed, 116 insertions(+), 2 deletions(-)
-- 2.9.3
| |