lkml.org 
[lkml]   [2017]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8 6/6] i2c: designware: enable SLAVE in platform module
Date
- Slave mode selected in platform module if the support is detected in
the DT.

Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
---
v7-v8
- moved "bool mode;" comment/description to this patch

drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/busses/i2c-designware-core.h | 2 ++
drivers/i2c/busses/i2c-designware-platdrv.c | 41 +++++++++++++++++++++++++----
3 files changed, 39 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 84efa57f90b3..ada037186ff8 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -484,6 +484,7 @@ config I2C_DESIGNWARE_SLAVE
select I2C_SLAVE
select I2C_SLAVE_EEPROM
depends on I2C_DESIGNWARE_PLATFORM
+ default y
help
If you say yes to this option, support will be included for the
Synopsys DesignWare I2C slave adapter.
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index fc3227782082..e96b75869959 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -226,6 +226,7 @@
* @disable: function to disable the controller
* @disable_int: function to disable all interrupts
* @init: function to initialize the I2C hardware
+ * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE
*
* HCNT and LCNT parameters can be used if the platform knows more accurate
* values than the one computed based only on the input clock frequency.
@@ -280,6 +281,7 @@ struct dw_i2c_dev {
void (*disable)(struct dw_i2c_dev *dev);
void (*disable_int)(struct dw_i2c_dev *dev);
int (*init)(struct dw_i2c_dev *dev);
+ int mode;
};

#define ACCESS_SWAP 0x00000001
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 96c04a4475d2..ff31281554ad 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -1,5 +1,5 @@
/*
- * Synopsys DesignWare I2C adapter driver (master only).
+ * Synopsys DesignWare I2C adapter driver.
*
* Based on the TI DAVINCI I2C adapter driver.
*
@@ -157,9 +157,13 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev)

static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
{
+ dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
+
dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
DW_IC_CON_RESTART_EN;

+ dev->mode = DW_IC_MASTER;
+
switch (dev->clk_freq) {
case 100000:
dev->master_cfg |= DW_IC_CON_SPEED_STD;
@@ -172,6 +176,28 @@ static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
}
}

+static void i2c_dw_configure_slave(struct dw_i2c_dev *dev)
+{
+ dev->functionality = I2C_FUNC_SLAVE | DW_IC_DEFAULT_FUNCTIONALITY;
+
+ dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL |
+ DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED |
+ DW_IC_CON_SPEED_FAST;
+
+ dev->mode = DW_IC_SLAVE;
+
+ switch (dev->clk_freq) {
+ case 100000:
+ dev->slave_cfg |= DW_IC_CON_SPEED_STD;
+ break;
+ case 3400000:
+ dev->slave_cfg |= DW_IC_CON_SPEED_HIGH;
+ break;
+ default:
+ dev->slave_cfg |= DW_IC_CON_SPEED_FAST;
+ }
+}
+
static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare)
{
if (IS_ERR(i_dev->clk))
@@ -285,9 +311,10 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
if (ret)
goto exit_reset;

- dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
-
- i2c_dw_configure_master(dev);
+ if (i2c_detect_slave_mode(&pdev->dev))
+ i2c_dw_configure_slave(dev);
+ else
+ i2c_dw_configure_master(dev);

dev->clk = devm_clk_get(&pdev->dev, NULL);
if (!i2c_dw_plat_prepare_clk(dev, true)) {
@@ -316,7 +343,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
}

- ret = i2c_dw_probe(dev);
+ if (dev->mode == DW_IC_SLAVE)
+ ret = i2c_dw_probe_slave(dev);
+ else
+ ret = i2c_dw_probe(dev);
+
if (ret)
goto exit_probe;

--
2.11.0

\
 
 \ /
  Last update: 2017-04-12 18:49    [W:0.068 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site