lkml.org 
[lkml]   [2017]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] ARM: dts: da850: Add node for LEGO MINDSTORMS EV3 Battery
Date
This adds a new node to the LEGO MINDSTORMS EV3 device tree for the battery.

Signed-off-by: David Lechner <david@lechnology.com>
---
arch/arm/boot/dts/da850-lego-ev3.dts | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index c20580a..99cd561 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -172,6 +172,18 @@
gpio = <&gpio 111 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ /*
+ * The EV3 can use 6-AA batteries or a rechargeable Li-ion battery pack.
+ */
+ battery {
+ pinctrl-names = "default";
+ pintctrl-0 = <&battery_pins>;
+ compatible = "lego,ev3-battery";
+ io-channels = <&adc 4>, <&adc 3>;
+ io-channel-names = "voltage", "current";
+ rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
+ };
};

&pmx_core {
@@ -235,6 +247,15 @@
0x34 0x00000008 0x0000000f
>;
};
+
+ battery_pins: pinmux_battery_pins {
+ pinctrl-single,bits = <
+ /* GP0[6] */
+ 0x04 0x00000080 0x000000f0
+ /* GP8[8] */
+ 0x4c 0x00000080 0x000000f0
+ >;
+ };
};

&pinconf {
@@ -349,6 +370,13 @@

&gpio {
status = "okay";
+
+ /* Don't pull down battery voltage adc io channel */
+ batt_volt_en {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
};

&usb_phy {
--
2.7.4
\
 
 \ /
  Last update: 2017-04-11 23:07    [W:0.051 / U:4.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site