lkml.org 
[lkml]   [2017]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] ASoC: hisilicon: Address style nit to use break in final default of switch statement
Date
Mark Brown suggested a style change to use break in the final
default of a switch statement, so this patch addresses that.

Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andy Green <andy@warmcat.com>
Cc: Dave Long <dave.long@linaro.org>
Cc: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
sound/soc/hisilicon/hi6210-i2s.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/sound/soc/hisilicon/hi6210-i2s.c b/sound/soc/hisilicon/hi6210-i2s.c
index 1909bfc..27553dc 100644
--- a/sound/soc/hisilicon/hi6210-i2s.c
+++ b/sound/soc/hisilicon/hi6210-i2s.c
@@ -324,6 +324,7 @@ static int hi6210_i2s_hw_params(struct snd_pcm_substream *substream,
default:
i2s->bits = 16;
dma_data->addr_width = 2;
+ break;
}
i2s->rate = params_rate(params);
i2s->channels = params_channels(params);
@@ -442,6 +443,7 @@ static int hi6210_i2s_hw_params(struct snd_pcm_substream *substream,
val = hi6210_read_reg(i2s, HII2S_I2S_CFG);
val &= ~HII2S_I2S_CFG__S2_FRAME_MODE;
hi6210_write_reg(i2s, HII2S_I2S_CFG, val);
+ break;
}

/* clear loopback, set signed type and word length */
--
2.7.4
\
 
 \ /
  Last update: 2017-04-11 21:16    [W:4.109 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site