lkml.org 
[lkml]   [2017]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/3] cpufreq: Add Tegra186 cpufreq driver
From
Date
On 04/11/2017 09:35 AM, Viresh Kumar wrote:
> On 04-04-17, 16:43, Mikko Perttunen wrote:
>> Add a new cpufreq driver for Tegra186 (and likely later).
>> The CPUs are organized into two clusters, Denver and A57,
>> with two and four cores respectively. CPU frequency can be
>> adjusted by writing the desired rate divisor and a voltage
>> hint to a special per-core register.
>>
>> The frequency of each core can be set individually; however,
>> this is just a hint as all CPUs in a cluster will run at
>> the maximum rate of non-idle CPUs in the cluster.
>>
>> Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
>> ---
>> v2:
>> - Many cosmetic / restructuring changes
>> - Only one aperture read from DT now, with a new
>> structure containing the offset among other details
>> per cluster.
>> - Don't enable the driver by default.
>>
>> drivers/cpufreq/Kconfig.arm | 6 +
>> drivers/cpufreq/Makefile | 1 +
>> drivers/cpufreq/tegra186-cpufreq.c | 275 +++++++++++++++++++++++++++++++++++++
>> 3 files changed, 282 insertions(+)
>> create mode 100644 drivers/cpufreq/tegra186-cpufreq.c
>
> For all three patches.
>
> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
>

Thanks!

Mikko

\
 
 \ /
  Last update: 2017-04-11 08:37    [W:0.077 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site