lkml.org 
[lkml]   [2017]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.4 11/32] iio: bmg160: reset chip when probing
Date
4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Quentin Schulz <quentin.schulz@free-electrons.com>

commit 4bdc9029685ac03be50b320b29691766d2326c2b upstream.

The gyroscope chip might need to be reset to be used.

Without the chip being reset, the driver stopped at the first
regmap_read (to get the CHIP_ID) and failed to probe.

The datasheet of the gyroscope says that a minimum wait of 30ms after
the reset has to be done.

This patch has been checked on a BMX055 and the datasheet of the BMG160
and the BMI055 give the same reset register and bits.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/iio/gyro/bmg160_core.c | 12 ++++++++++++
1 file changed, 12 insertions(+)

--- a/drivers/iio/gyro/bmg160_core.c
+++ b/drivers/iio/gyro/bmg160_core.c
@@ -28,6 +28,7 @@
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/regmap.h>
+#include <linux/delay.h>
#include "bmg160.h"

#define BMG160_IRQ_NAME "bmg160_event"
@@ -53,6 +54,9 @@
#define BMG160_NO_FILTER 0
#define BMG160_DEF_BW 100

+#define BMG160_GYRO_REG_RESET 0x14
+#define BMG160_GYRO_RESET_VAL 0xb6
+
#define BMG160_REG_INT_MAP_0 0x17
#define BMG160_INT_MAP_0_BIT_ANY BIT(1)

@@ -186,6 +190,14 @@ static int bmg160_chip_init(struct bmg16
int ret;
unsigned int val;

+ /*
+ * Reset chip to get it in a known good state. A delay of 30ms after
+ * reset is required according to the datasheet.
+ */
+ regmap_write(data->regmap, BMG160_GYRO_REG_RESET,
+ BMG160_GYRO_RESET_VAL);
+ usleep_range(30000, 30700);
+
ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val);
if (ret < 0) {
dev_err(data->dev, "Error reading reg_chip_id\n");

\
 
 \ /
  Last update: 2017-04-10 19:57    [W:0.185 / U:1.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site