lkml.org 
[lkml]   [2017]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 086/152] PCI: Add MCFG quirks for Cavium ThunderX pass1.x host controller
Date
4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomasz Nowicki <tn@semihalf.com>

[ Upstream commit 648d93fc77da4f655cf13108417f33c91d745e2c ]

ThunderX pass1.x requires to emulate the EA headers for on-chip devices
hence it has to use custom pci_thunder_ecam_ops for accessing PCI config
space (pci-thunder-ecam.c). Add new entries to MCFG quirk array where it
can be applied while probing ACPI based PCI host controller.

ThunderX pass1.x is using the same way for accessing off-chip devices
(so-called PEM) as silicon pass-2.x so we need to add PEM quirk entries
too.

Quirk is considered for ThunderX silicon pass1.x only which is identified
via MCFG revision 2.

ThunderX pass 1.x requires the following accessors:

NUMA node 0 PCI segments 0- 3: pci_thunder_ecam_ops (MCFG quirk)
NUMA node 0 PCI segments 4- 9: thunder_pem_ecam_ops (MCFG quirk)
NUMA node 1 PCI segments 10-13: pci_thunder_ecam_ops (MCFG quirk)
NUMA node 1 PCI segments 14-19: thunder_pem_ecam_ops (MCFG quirk)

[bhelgaas: change Makefile/ifdefs so quirk doesn't depend on
CONFIG_PCI_HOST_THUNDER_ECAM]
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/acpi/pci_mcfg.c | 15 +++++++++++++++
drivers/pci/host/Kconfig | 3 ++-
drivers/pci/host/Makefile | 2 +-
drivers/pci/host/pci-thunder-ecam.c | 9 ++++++++-
include/linux/pci-ecam.h | 3 ++-
5 files changed, 28 insertions(+), 4 deletions(-)

--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -93,6 +93,21 @@ static struct mcfg_fixup mcfg_quirks[] =
/* SoC pass2.x */
THUNDER_PEM_QUIRK(1, 0),
THUNDER_PEM_QUIRK(1, 1),
+
+#define THUNDER_ECAM_QUIRK(rev, seg) \
+ { "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY, \
+ &pci_thunder_ecam_ops }
+ /* SoC pass1.x */
+ THUNDER_PEM_QUIRK(2, 0), /* off-chip devices */
+ THUNDER_PEM_QUIRK(2, 1), /* off-chip devices */
+ THUNDER_ECAM_QUIRK(2, 0),
+ THUNDER_ECAM_QUIRK(2, 1),
+ THUNDER_ECAM_QUIRK(2, 2),
+ THUNDER_ECAM_QUIRK(2, 3),
+ THUNDER_ECAM_QUIRK(2, 10),
+ THUNDER_ECAM_QUIRK(2, 11),
+ THUNDER_ECAM_QUIRK(2, 12),
+ THUNDER_ECAM_QUIRK(2, 13),
};

static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -248,7 +248,8 @@ config PCI_HOST_THUNDER_PEM

config PCI_HOST_THUNDER_ECAM
bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon"
- depends on OF && ARM64
+ depends on ARM64
+ depends on OF || (ACPI && PCI_QUIRKS)
select PCI_HOST_COMMON
help
Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs.
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_PCIE_ALTERA) += pcie-altera
obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
obj-$(CONFIG_ARM64) += pcie-hisi.o
obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
-obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
+obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
obj-$(CONFIG_ARM64) += pci-thunder-pem.o
obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
--- a/drivers/pci/host/pci-thunder-ecam.c
+++ b/drivers/pci/host/pci-thunder-ecam.c
@@ -14,6 +14,8 @@
#include <linux/pci-ecam.h>
#include <linux/platform_device.h>

+#if defined(CONFIG_PCI_HOST_THUNDER_ECAM) || (defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS))
+
static void set_val(u32 v, int where, int size, u32 *val)
{
int shift = (where & 3) * 8;
@@ -346,7 +348,7 @@ static int thunder_ecam_config_write(str
return pci_generic_config_write(bus, devfn, where, size, val);
}

-static struct pci_ecam_ops pci_thunder_ecam_ops = {
+struct pci_ecam_ops pci_thunder_ecam_ops = {
.bus_shift = 20,
.pci_ops = {
.map_bus = pci_ecam_map_bus,
@@ -355,6 +357,8 @@ static struct pci_ecam_ops pci_thunder_e
}
};

+#ifdef CONFIG_PCI_HOST_THUNDER_ECAM
+
static const struct of_device_id thunder_ecam_of_match[] = {
{ .compatible = "cavium,pci-host-thunder-ecam" },
{ },
@@ -373,3 +377,6 @@ static struct platform_driver thunder_ec
.probe = thunder_ecam_probe,
};
builtin_platform_driver(thunder_ecam_driver);
+
+#endif
+#endif
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -62,7 +62,8 @@ extern struct pci_ecam_ops pci_generic_e
#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
extern struct pci_ecam_ops pci_32b_ops; /* 32-bit accesses only */
extern struct pci_ecam_ops hisi_pcie_ops; /* HiSilicon */
-extern struct pci_ecam_ops thunder_pem_ecam_ops; /* Cavium ThunderX 2.x */
+extern struct pci_ecam_ops thunder_pem_ecam_ops; /* Cavium ThunderX 1.x & 2.x */
+extern struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */
#endif

#ifdef CONFIG_PCI_HOST_GENERIC

\
 
 \ /
  Last update: 2017-04-10 18:47    [W:0.440 / U:6.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site