lkml.org 
[lkml]   [2017]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] ASoC: stm32: add bindings for SAI
Date
This patch adds documentation of device tree bindings for the
STM32 SAI ASoC driver.

Signed-off-by: olivier moysan <olivier.moysan@st.com>
---
.../devicetree/bindings/sound/st,stm32-sai.txt | 89 ++++++++++++++++++++++
1 file changed, 89 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.txt

diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
new file mode 100644
index 0000000..c59a3d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
@@ -0,0 +1,89 @@
+STMicroelectronics STM32 Serial Audio Interface (SAI).
+
+The SAI interface (Serial Audio Interface) offers a wide set of audio protocols
+as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97.
+The SAI contains two independent audio sub-blocks. Each sub-block has
+its own clock generator and I/O lines controller.
+
+Required properties:
+ - compatible: Should be "st,stm32f4-sai"
+ - reg: Base address and size of SAI common register set.
+ - clocks: Must contain phandle and clock specifier pairs for each entry
+ in clock-names.
+ - clock-names: Must contain "x8k" and "x11k"
+ "x8k": SAI parent clock for sampling rates multiple of 8kHz.
+ "x11k": SAI parent clock for sampling rates multiple of 11.025kHz.
+ - interrupts: cpu DAI interrupt line shared by SAI sub-blocks
+
+Optional properties:
+ - resets: Reference to a reset controller asserting the SAI
+
+SAI subnodes:
+Two subnodes corresponding to SAI sub-block instances A et B can be defined.
+Subnode can be omitted for unsused sub-block.
+
+SAI subnodes required properties:
+ - compatible: Should be "st,stm32-sai-sub-a" or "st,stm32-sai-sub-b"
+ for SAI sub-block A or B respectively.
+ - reg: Base address and size of SAI sub-block register set.
+ - clocks: Must contain one phandle and clock specifier pair
+ for sai_ck which feeds the internal clock generator.
+ - clock-names: Must contain "sai_ck".
+ - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
+ - dma-names: identifier string for each DMA request line
+ "tx": if sai sub-block is configured as playback DAI
+ "rx": if sai sub-block is configured as capture DAI
+ - pinctrl-names: should contain only value "default"
+ - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt
+
+Example:
+sound_card {
+ compatible = "audio-graph-card";
+ dais = <&sai1b_port>;
+};
+
+sai1: sai1@40015800 {
+ compatible = "st,stm32f4-sai";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ reg = <0x40015800 0x4>;
+ clocks = <&rcc 1 CLK_SAIQ_PDIV>, <&rcc 1 CLK_I2SQ_PDIV>;
+ clock-names = "x8k", "x11k";
+ interrupts = <87>;
+
+ sai1b: audio-controller@40015824 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-b";
+ reg = <0x40015824 0x1C>;
+ clocks = <&rcc 1 CLK_SAI2>;
+ clock-names = "sai_ck";
+ dmas = <&dma2 5 0 0x400 0x0>;
+ dma-names = "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai1b>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sai1b_port: port@0 {
+ reg = <0>;
+ cpu_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+ audio-graph-card,format = "i2s";
+ audio-graph-card,bitclock-master = <&codec_endpoint>;
+ audio-graph-card,frame-master = <&codec_endpoint>;
+ };
+ };
+ };
+ };
+};
+
+audio-codec {
+ codec_port: port {
+ codec_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint>;
+ };
+ };
+};
--
1.9.1
\
 
 \ /
  Last update: 2017-04-10 17:23    [W:0.087 / U:2.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site